I’m loving your videos. And learning a lot. Thank You 🙏🏾 I have a question: can you please do a video on how you go from image to a simple plans that you use to cut out shapes? I’m trying to understand how you figure out what shapes to make from the picture. Thank you 🙏🏾
I've tried making a video but it turns out my old laptop doesn't support screen recording. Always force close, need to upgrade computer device. Sad....
Hello friend, thank you for your teachings, can you please tell me what is the diameter and length size of the wing union tube, and the diameter size of the coupling tube that is fixed to the fuselage? I need to buy these tubes and I don't know what size I should buy to finish the construction.
Suka copot om kalau pakai hinge plastik, pernah pakai model full lakban kertas gitu 2 sisi cuma jadi berat gerakan servonya. Kayaknya divideo diputus-putus pakai cutter gitu ya lakbannya biar gak berat gerakan aileronnya?
Aslamo ilkom Bro Im your friend from Pakistan 🇵🇰 . Bro I'm still waiting for your positive reply about my hart favorite aircraft K-8 Karakorum Pak-Chaina models i need Drawing please 🙏 please please
drive.google.com/file/d/1MThm8Pcp-yjQ0X77DF4Y10H3qFeFxOYL/view?usp=drivesdk Ini masih ada yg ke tumpuk halaman 11-12 blm sempet beneein lg, sebaiknya print 2x yg halaman tsb
Halo teman. Cairan apa yang Anda taruh di permukaan lalu ditaruh di atas kertas dan jenis kertas apa yang Anda gunakan? Saya mencoba memahami dalam video yang Anda posting berbicara tentang bahan yang Anda gunakan, tetapi saya rasa saya tidak memahaminya dengan benar. Bisakah Anda menjawab saya? Terima kasih dan selamat atas karya indahnya. Célio - Brasil.
Itu adalah lem kayu yang dicampur dengan sedikit air. Kertas yang saya gunakan adalah kertas minyak, memiliki sifat ringan kuat tahan terhadap minyak dan biasa digunakan untuk membungkus makanan dan membuat layang - layang
An inspiring build and all while sitting on the floor. Table and a chair not required. Great work sir.
😀😁 This is the traditional method that I use, I hope many people will see my work. Thank you
Parabéns! Gostei de seu trabalho. Você me motivou a fazer um aqui no Brasil em isopor. Obrigado pelo vídeo.
I’m loving your videos. And learning a lot. Thank You 🙏🏾
I have a question: can you please do a video on how you go from image to a simple plans that you use to cut out shapes? I’m trying to understand how you figure out what shapes to make from the picture. Thank you 🙏🏾
I've tried making a video but it turns out my old laptop doesn't support screen recording. Always force close, need to upgrade computer device. Sad....
"I am eagerly looking forward to the day you will build the Su-35."
Beautiful Cub Sir! Can't wait for the plans 😎👌👍
Thanks 👍
Parabéns lindo Aeromodelo.
Abraços Rio de janeiro Brazil
Olá Brasil.. Obrigado por assistir
Great job! I loved!
Thank you
Very good nice project
Thank you brother
Hi brother can you tell me please how you tiled the plans in inkscape. Make a tutorial video if possible please
Tak kiro carbon tenan tibak nya panggah gabus cup Karo kertas cub ❤❤❤
Spar carbon mbah... Tenan 😁
Parabéns seus projetos são perfeitos 👏👏👏
Gracias amigo
Beautiful. I built a Cessna of this size. I’ll be building a smaller version of this one in the future too!
Amazing... I also like Cessna, it must be very beautiful
Hello friend, thank you for your teachings, can you please tell me what is the diameter and length size of the wing union tube, and the diameter size of the coupling tube that is fixed to the fuselage? I need to buy these tubes and I don't know what size I should buy to finish the construction.
@@edgardo9469 wing spar : 25mm and wing struts : 10mm
Excelente projeto, Parabéns..
Gracias amigo
Mantap om, ditunggu plannya release👍
Siap om....
Oh ya om untuk engsel/hinge itu cuma pakai isolasi kertas ya? Biasanya geraknya agak berat di servo kalau full isolasi dari pangal sampai ujung.
@@pilotajaran5999 ditandai garis dl jd isolasi gak melenceng tp mending pake hinge klo gak terbiada
Suka copot om kalau pakai hinge plastik, pernah pakai model full lakban kertas gitu 2 sisi cuma jadi berat gerakan servonya.
Kayaknya divideo diputus-putus pakai cutter gitu ya lakbannya biar gak berat gerakan aileronnya?
@@pilotajaran5999 klo pake isolasi kertas harus lurus rata, itu full isolasi bolak balik gak dipotong, yg dipotong batas aileron & flap
Excelente proyecto, felicitaciones👍👍👍
Muchas gracias
@@badarierzet_rcplane con ganas de ver la segunda parte y ver esa belleza volar
La parte 2 aún está en edición, tal vez la suba en 2 días.@@fajotacha
Parabéns, seus aeros são top, já baixei umas 3 arquivos seu kkk
Obrigado amigo
Nice work as always
Horizon Hobby Could Definitely Hire You!!
L😀L
Make a more videos on airplanes ,🎉🎉🎉🎉🎉
Wih makin gede ni produksinya. Uda gk bikin di meja lagi,
Divideo ini lg masa transisi workshop, yg part 2 udah dimeja baru 😊
Aslamo ilkom Bro
Im your friend from Pakistan 🇵🇰 .
Bro I'm still waiting for your positive reply about my hart favorite aircraft K-8 Karakorum Pak-Chaina models i need Drawing please 🙏 please please
Please, what propeller did you use
In this video I use 4250 800kv propeller 14x8
kerenn ommm 👍👍
Siap om 🙏 terimakasih
Cakep
btw plan lasernya om
drive.google.com/file/d/1MThm8Pcp-yjQ0X77DF4Y10H3qFeFxOYL/view?usp=drivesdk
Ini masih ada yg ke tumpuk halaman 11-12 blm sempet beneein lg, sebaiknya print 2x yg halaman tsb
Halo teman. Cairan apa yang Anda taruh di permukaan lalu ditaruh di atas kertas dan jenis kertas apa yang Anda gunakan? Saya mencoba memahami dalam video yang Anda posting berbicara tentang bahan yang Anda gunakan, tetapi saya rasa saya tidak memahaminya dengan benar. Bisakah Anda menjawab saya? Terima kasih dan selamat atas karya indahnya. Célio - Brasil.
Itu adalah lem kayu yang dicampur dengan sedikit air. Kertas yang saya gunakan adalah kertas minyak, memiliki sifat ringan kuat tahan terhadap minyak dan biasa digunakan untuk membungkus makanan dan membuat layang - layang
Mantap bos.
Terimakasih bos...
mantap banget👍👍👍👍
Siap om... 🙏
What kind of glue do you use?
For covering I use wood glue
@@badarierzet_rcplane tks bro.
Very nice project, can you send me the Cdr file, please?
Maybe in the part 2, now it's still on correction
Ti was wes seneng seneg, baknino plan e kaming soon to lo you😅😅😅
Sabar...ambegan sik, perlu koreksi, laptop ngadat, kopi entek rokok gak doyan
@@badarierzet_rcplane hahahha, malahan. Semangat terus pokok e
bonjour tu a le plant de ton avion merci d'avance bonne journée
Merci, mon ami
Friend, I loved your airplane project, you can sell the project I would like or post it so that you like it, it's very beautiful, I'm waiting.
Before I post my project it's have been sold in my local areas. Thank you for your positive response
I don't live in your region, if you have it for sale, I'll buy the project so I can do it in Styrofoam, maybe I live in Portugal, friend!
sayapnya pake bahan apa om?
Hardfoam density 20
How much foam boxes cost you to make this plan?
I don't remember how many boxes. Because it's in a cut shape
👏👏👏👏👏👏👍🤩
Qual peso final de voo
About 4kg
Plans?
Update soon..
Hi brother can you tell me please how you tiled the plans in inkscape. Make a tutorial video if possible please
Yes, I've tried it. Unfortunately the device I have does not support screen record
@@badarierzet_rcplane thanks for the reply