@@bradennolan3592 revzilla has been sold out, look for 2014/2015 try doing a search on the part #, i think we have it listed in this thread. We ordered a bunch from the factory about a month ago, they are still held up in customs do to the Corona outbreak.
When you order this exhaust (i got this one fron revzilla, this is the unit DANMOTO Danmoto JISU Slip-On Exhaust Hyosung GT250 / GT250R 2003-2014 Item: P387042 SKU: 1241460 Note: When you take the old unit off, it will normally have a sticking point just before its all the way off, its a tight fit over the catalytic converter, just keep working with it or use a rubber mallet to help!
@@michaelhall5555 with a straight pipe you will most likely get a FI light and the bike will stop running correctly a start stalling. the bike needs some back pressure from the exhaust to run correct
The catalytic converter is welded to the end of the header, it’s small, light and not super restricted. Sometimes they have to be removed to fit a new exhaust. If the exhaust is too free flowing it will trigger the FI warning light and the bike will tend to stall, as the bike will be running too lean.
i got this one from revzilla, we then bought them direct from DANMOTO, because Revzilla did not have any in stock. Danmoto JISU Slip-On Exhaust Hyosung GT250 / GT250R 2003-2014 Item: P387042 SKU: 1241460
Tin Roof CycleWorks Unfortunately I did not but someone told me that there was too much airflow so I was dumping more fuel than air I just went back to the stock canister to get everything back to normal now my bike runs a heck of a lot better but also put high-octane treatment in the fuel for better performance I highly recommend to anybody changing their exhaust on a 250ccmotorcycle not to get a replica but to get the real deal
I just got the exact same bike about two weeks ago. Loving the bike and thanks for the video. I was looking to upgrading the exhaust
did you get that exhaust? they sound so good
Tin Roof CycleWorks I’ve been looking for one online. Everywhere I’ve looked doesn’t have them in stock. Or there on back order.
Tin Roof CycleWorks do you have any other recommendations?
@@kylet4490 where are you located, I will see if I know anyone with one
Tin Roof CycleWorks I’m in the Dayton Ohio area.
very very clean
Thanks! and thanks for checking out the video
Just put mine on. You are right is sounds great. Like a 250cc Ducati.
Where did you order from? Revzilla isn’t showing me an option for Hyosung
@@bradennolan3592 revzilla has been sold out, look for 2014/2015 try doing a search on the part #, i think we have it listed in this thread.
We ordered a bunch from the factory about a month ago, they are still held up in customs do to the Corona outbreak.
@@bradennolan3592 Danmoto
When you order this exhaust (i got this one fron revzilla, this is the unit
DANMOTO
Danmoto JISU Slip-On Exhaust Hyosung GT250 / GT250R 2003-2014
Item: P387042 SKU: 1241460
Note:
When you take the old unit off, it will normally have a sticking point just before its all the way off, its a tight fit over the catalytic converter, just keep working with it or use a rubber mallet to help!
Tin Roof CycleWorks appreciate that. Is this the one you’re talking about? It’s the only one I could find on revzilla but it only says up to 2014
www.revzilla.com/motorcycle/danmoto-jisu-slip-on-exhaust-hyosung-gt250-gt250r-2003-2014?rrec=true
@@adrianlibrea371 thats it, sorry for the confusion
Would it hurt the bike to run basically a straight pipe?
@@michaelhall5555 with a straight pipe you will most likely get a FI light and the bike will stop running correctly a start stalling.
the bike needs some back pressure from the exhaust to run correct
Do you think the catalytic convertet could have been removed turning it? It seems to be an insert.
The catalytic converter is welded to the end of the header, it’s small, light and not super restricted. Sometimes they have to be removed to fit a new exhaust. If the exhaust is too free flowing it will trigger the FI warning light and the bike will tend to stall, as the bike will be running too lean.
Can you send me the link for the exhaust?
i got this one from revzilla, we then bought them direct from DANMOTO, because Revzilla did not have any in stock.
Danmoto JISU Slip-On Exhaust Hyosung GT250 / GT250R 2003-2014
Item: P387042 SKU: 1241460
Would you be able to link me which exhaust this is? Can’t find any that says fits 2016 gt250. Thanks
Revzilla lists this exhaust for the 2015, its is the correct unit for the 2016
Amazon sells it. Search dan moto
Hii
I want this black exhaust.
Can u arrange pls
Great exhaust, at the time only a few people sold it, Rev Zilla had some.
Looks great! I have the same bike but, all black and grey. Check my vid out on my page, I put a mock Toce exhaust on mine. Let me know what you think.
sorry that took me a while to get to look at that Video that Exhaust looks good!
did you figure out the Fi light issue?
Tin Roof CycleWorks Unfortunately I did not but someone told me that there was too much airflow so I was dumping more fuel than air I just went back to the stock canister to get everything back to normal now my bike runs a heck of a lot better but also put high-octane treatment in the fuel for better performance I highly recommend to anybody changing their exhaust on a 250ccmotorcycle not to get a replica but to get the real deal