You can get an xploders barrel to fire single boomco darts, it nests in cpvc or pex. also there is stanley aluminum tubing that has a 7/8 in od and 3/4 in Id that fits mega darts very well.
3/4" Schedule 80 may fit Mega darts, depending on the manufacturer. There's also some 3/4" stuff called "MIDI" (I think) that works with a tiny bit of reaming with a sandpaper flap taped to a dowel in a drill.
the vortex one was a pleasant surprise, very well done :D think I need to do that for my masterkey's PVC coupling, gonna take a bit of work to get the modified cycloneshock to spit out those though...
I think it's some electrical conduit that can fire megas haven't bought it yet but the test fit was there. don't remember specifics but best case a trip to home depot or Lowes and you could find it with a bit of test fitting.
what if you made a tube that acted like a blunderbuss? you fill the can sized barrel with leaves n stuff and fire it like a confetti cannon? just a fun thing to mess around with.
Great work yet again man! Looking forward to future vids. The pipe i use for my mega darts is 25mm, it may be a bit better than that pipe in the video as it looked like the mega darts slid through really easily? 25mm isn't a tight fit as they slide a bit, but i don't think as much as the darts in the barrel in this vid. ~ ;)
Chaylo Laurino No worries man, working on making my own maverick cylinder absolvers but there are none of those bushing things here in Australia.... got any other ideas of things i can use?
Unfortunately I have no idea what is or is not available in Australia. I would just take a Maverick cylinder to a plumbing supply store and see what fits. That is what I did to find the bushings I use.
You might be correct. However, I don't think the air is passing through that point. I think it is passing up the middle of the dart peg. Thus I don't think air pressure is being lost as I think those holes are just for decoration...but I will confirm that.
There are those really old dart grenade things, you pump them up and throw them, then they will launch darts out on contact. I'll bet there's a way you can shoot one of those
I have 2 of them and they are, sadly, way to heavy for a Titan to fire. I have considered building a custom launcher...but I am afraid of breaking them.
For the disc launcher attachment, would it make sense to kink one side to disturb the airflow as to put a slight spin on the disk? Curious to see how no spin affects their distance and stability during flight.
I reaaaaaaly wanna make an underbarrel but I don't know where to buy a Titan from or what it looks like... are you going to do a build on the underbarrel? It just looks o damn good!
I recently did a video on EIR' internals which included the under-barrel. Titan's can be gotten on Ebay but they can be a bit spendy. I got lucky and have found at few at Goodwill over the years.
The power might also be shot, pun intended, after all, all the round types might be too much to get good range with, similar to the problem with the 10 shot ablsolver.
It cannot fire reactor balls and pegging someone with a reactor ball at 30 feet sounds glorious. Perhaps a shortened reactor tube that holds 3 balls? Or even the tightening ring end turned around to hold the ball then have some length of it as semi active barrel for direction? It may even be the right inner dimension to stuff the demolisher rocket into instead of the traditional peg firing.
I covered the old Nerf Balls in the addendum video. The BoomCo ball things were mentioned before, I don't have any or even. If I get some I will try it. The same goes for Zing ammo. Thanks for the suggestions!
no problem. didnt see the addendum vid in the recommended, and if you cant find boomco balls in stores, www.amazon.com/BoomCo-BOOMco-Ultimate-Rounds-Pack/dp/B00MFPBW4Q/ref=sr_1_2?ie=UTF8&qid=1479261377&sr=8-2&keywords=boomco+rounds
Sometimes I wish I was into the Nerf hobby so i could put all the random knowledge i have acquired watching youtube videos to some kind of use. Seriously, I'm subbed to like 3-4 Nerf channels and haven't used a nerf blaster in years.
I have a really cool idea you should try to make this into a revolver for exple if it used a hammershot barrel have it puff out a fifth of the air each shot i dont know if its possible but might be worth a try
This is a little late I've been watching your videos for a long time but I just realize that you said what barrel fits a mega dart better I'm sure that because when you go to rifting you pick up a little recon's and some of them might have the barrel attachments the inside of a retaliator or recon front barrel attachment the inner barrel in that the orange barrel it makes a perfect seal
Someone mentioned the old Megas and I used to have one...but I think I lent it to Walcom when I lent him two of my old mega blasters to do Tag Back episodes on so I can't test it to see if it fits any of my current barrels. By the Gods you are right! I cannot fire the big green Koosh balls or the small orange Hog Wild balls. I have both of those...to the shop!
maybe make a longer disk shooting barrel with a peg in the back to keep them from slipping back too far so you can shoot maybe 3 or 4 at once or shoot just one better
Right? When I first integrated it I removed the thread that held on the Titan barrel. I probably could make a barrel that would fit a Titan missile but...I have Titans for that. :P
The only other type of ammo i can think of is the terrible rebel arrows. i mean to complete the set you can but no one uses them because they kinda suck.
You would think, given that it is powered by a titan, that I would be able to fire Titan rockets...but not so much. However, my shoulder mounted Titan can fire Titan rockets...so there is that...
also any idea how many volts I can put through a stock stryfe without a thermester before it catches fire, I built a compact stryfe that only has the barrel, battery tray, flywheels, flywheel cage, a 9 volt, and wires, I have it set where I have 2 buttons, one for 6 volt, one for 9 volt, and if both are press at the same time it pumps 15 volts through it, but I feel 15V is still not enough
Oddly enough...no. The way I designed it means you really cannot fit a Titan Missile on it anymore. When I built it I did not have a Titan Missile so I didn't bother to design it to be able to fire one.
You can't fire ballzooka balls! Or the old school giant darts that were only for the cyclotron? I think that's what the name was besides that you got them all! Good job man really nice
Many opted out because of the storm...that never came. It rained every damn second we were there but no wind. The next game is in April and will have a massively update rule set. Should be awesome. You should all join me in Citadel and help pacify the Waste!
I caught that from your clever use of spelling to convey a humorous accent. ;) Let me try a more fitting response: Indeed, my young apprentice. Heed my vords and emulate my actions and you too vill be a master vone day. :D
Austin Burkett Kind of. I carry a pair of foam stressball grenades (see my plate carrier video). In HvZ they act as socks. Feel free to comment all you like.
It has several meanings. Mostly it means I am a huge nerd. It is spelled either EIR or IRE (pronounced the same) EIR is the name of the Norse Valkyrie of Mercy (the Eldar Futhark is ᛖᛁᚱ). IRE means Wrath (from the Latin Ira) . I built it to kill Zombies. I believe that killing Zombies is a mercy and Zombies piss me off. As an acronym I say it stands for Elite Infantry Rifle.
What will happen is all the pressure will focus on the middle barrel. It will fire far, the other six might not fire at all. I tried this with the Legendfire cylinder.
I know this is an old video but you can make perfectly functional Mega stefans from 3/4" foam backer rod/caulk saver. I'm still trying to find a good weight but I use a spent .22lr casing and hot glue for now. I'm pretty sure that Mega darts fit in schedule 40 3/4" PVC pipe really tightly. Just trying to improve on your design for the underbarrel launcher.
NO! Just no! Under NO circumstances will I EVER condone or tolerate someone putting METAL in Nerf ammo and firing using compressed air. That is unsafe on a level I cannot even begin to fathom. If you need more weight use a denser foam or a layer of rubber covered by more foam. NEVER put metal in a Nerf Dart. It is not just unimaginably unsafe it is boardline illegal. You have essentially created a pellet gun at that point.
I don't ever shoot those at anyone, this is just something I use in my garage. I completely agree with you about not shooting it at anyone, I have a safe variant using putty as a weight for that. I'm just trying to determine the proper amount of weight for maximum range. I have no plans to ever actually use these things with metal weights. Do pieces of yoga mats make good weights?
Oh good. Measured amounts of putty would be a great way to experiment. Yoga mat or craft foam is usually dense. You can also get either rubber gaskets or just sheets of rubber. A layer or two between the backrod and some kind of softer head would add plenty of weight.
Keagen Fisher Yes it can. 8 of them at a time in fact (cylinder on the far right). And if you watch the addendum video I recently made a single shot BoomCo barrel as well. :)
I love how the Demolisher can fit onto the outside of a barrel that fires Elites - it's a rifle grenade!
Yup! I was SOOO jazzed when the demolisher came out and I discovered they fit! They fly so much better than the off brand rockets.
The first video I ever saw EIR in, you mentioned wanting to try an idea for vortex discs. I'm glad you got it to work.
This will sound crazy, but try a to use a tek 6 plunger tube for the mega darts. Plus your forgeting old school megas.
I will have to try that!
By the Gods you are right! And I have one of those...somewhere...maybe...I will find it and test it!
+Chaylo Laurino (Captain Xavier) Cool,thanks for responding.
Well, I know what I wanna do today
Three uploads! Nice! I'm excited for future content!!
Me too, honestly...
Captain Xavier titan pump tube stuff works great for mega and rival rounds
Hey yeah? I will have to see if I still have some! Thanks!
Captain Xavier anytime
+Captain Xavier your loadout can't fire zing arrows I notice a lot of people starting to bring zing bows to my local wars
ya it's official forget the hell hound you are the most creative nerfer that I've seen.
You can get an xploders barrel to fire single boomco darts, it nests in cpvc or pex. also there is stanley aluminum tubing that has a 7/8 in od and 3/4 in Id that fits mega darts very well.
Matthew Becker Excellent! Thank you!
3/4" Schedule 80 may fit Mega darts, depending on the manufacturer. There's also some 3/4" stuff called "MIDI" (I think) that works with a tiny bit of reaming with a sandpaper flap taped to a dowel in a drill.
Sweet, thanks.
How do you get a hold of a "drain blaster". I found them on eBay but they go for $30 and they were blue and red. Did you paint yours?
www.ltdcommodities.com/Garden--Outdoor---DIY/Home-Improvement/Household-Helpers/High+Pressure+Drain+Cleaner/prod1900235.jmp?ukwcid=+&cid=GooglePLA-19002351840519&adpos=1o1&creative=100810553713&device=c&matchtype=&network=g&gclid=CM_Zq57J5M8CFUdehgodOiYJ2Q
They are now on eBay for under fifteen dollars, super duper worth it for around eleven dollars.
Hi
Try to use the cylinder from a cycloneshock or a rotofury
too chunky
Can't wait to see your new.creations in da future
Dude this is awesome. I'm so going to dig into your channel and try and make some sort of set-up for airsoft.
Whoa! That disc launcher is cool looking!❄️🔥
The nerf discs can be fire from the flat hoses for a vacuum extension probably
How much would it cost for u to make one because I'll pay cash
ever considered using an apollo barrel to fire rival balls? it has a hopup in it that can possibly help your ranges.
the vortex one was a pleasant surprise, very well done :D think I need to do that for my masterkey's PVC coupling, gonna take a bit of work to get the modified cycloneshock to spit out those though...
might actually save the blood sweat and tears of making a dedicated vortex masterkey if I can get it working
The plunging tube of a old green color tek 6 can fit a mega dart extremely very well
I think it's some electrical conduit that can fire megas haven't bought it yet but the test fit was there. don't remember specifics but best case a trip to home depot or Lowes and you could find it with a bit of test fitting.
Also they are only sold in really long lengths no short ones like standard pvc so if you do buy it, it might be worth to make some mega absolvers
Sweet! I will look into it the next time I am at the Depot. Thanks!
hey did you look into the conduit and did it work out for you?
I have not yet. Been traveling. I'll let you when I do.
Ok just was wondering but thanks for the reply I am definitely enjoying your work after I saw walcom's video I wanted to see more
Hey captain Xavier have you tried those McDonald's little rockets maybe put it on and tried on eir. so you can test them that you didn't show us .
what if you made a tube that acted like a blunderbuss? you fill the can sized barrel with leaves n stuff and fire it like a confetti cannon? just a fun thing to mess around with.
...I really like that idea! That is happening!
Great work yet again man! Looking forward to future vids. The pipe i use for my mega darts is 25mm, it may be a bit better than that pipe in the video as it looked like the mega darts slid through really easily? 25mm isn't a tight fit as they slide a bit, but i don't think as much as the darts in the barrel in this vid. ~ ;)
Yeah, 3/4 pvc is loose enough the darts will slide out when you point the gun down. I will try to source some 25mm. Thanks!
Chaylo Laurino No worries man, working on making my own maverick cylinder absolvers but there are none of those bushing things here in Australia.... got any other ideas of things i can use?
Unfortunately I have no idea what is or is not available in Australia. I would just take a Maverick cylinder to a plumbing supply store and see what fits. That is what I did to find the bushings I use.
Chaylo Laurino okay ill give that a go. Cheers
Good luck!
Captain a better barrel for elites is 1/4 cpvc and it fits in 1/2 pvc but the inside of the 1/2 need to be sand down
I'm not 100% sure, but i think you can plug the holes in the boomco cylinder
You can see the bottom of the darts when you put them into the cylinder
You might be correct. However, I don't think the air is passing through that point. I think it is passing up the middle of the dart peg. Thus I don't think air pressure is being lost as I think those holes are just for decoration...but I will confirm that.
I think it needs to shoot lasers because it seems like you got them all down packed
I've been watching your videos since about 9:00 yesterday (England) and you've just gone from 11,800 subs to 12,004
...good lord...who are all these people! 8(
Captain Xavier lol
There are those really old dart grenade things, you pump them up and throw them, then they will launch darts out on contact. I'll bet there's a way you can shoot one of those
I have 2 of them and they are, sadly, way to heavy for a Titan to fire. I have considered building a custom launcher...but I am afraid of breaking them.
For the disc launcher attachment, would it make sense to kink one side to disturb the airflow as to put a slight spin on the disk? Curious to see how no spin affects their distance and stability during flight.
That is a very good though. The lack of spin is noticeable.
Proud of you Captain :)
Thanks!
I reaaaaaaly wanna make an underbarrel but I don't know where to buy a Titan from or what it looks like... are you going to do a build on the underbarrel? It just looks o damn good!
I recently did a video on EIR' internals which included the under-barrel. Titan's can be gotten on Ebay but they can be a bit spendy. I got lucky and have found at few at Goodwill over the years.
Thanks bro! I haven't watched all ya vids yet but love your whole loadout! Cheers for the reply! :)
Can you make and attachment for those cruddy little foam disks that don't shoot worth a darn? What about koosh rings?
That is on the list. I have a few. I am gonna try to make it shoot 3 or 4 at once. :P
Could you fire sledgefire shells?
A recommendation, and something I might try myself. See if you can mod a disc gun. They're REALLY accurate, but aren't the speediest projectiles.
It is on the list. I want to make an upgraded Nitron and a Nitron Pistol.
Cool!
Captain Xavier you should take the blueprints for the nerf 50 rnd drum and make it then sell it or something
welcome to UA-cam Chaylo
also, I want to see a custom attachment that will fire everything that it can already fire, but all at once
That...would be amazing. I can imagine an absolver that fires 1 elite, 1 mega, 1 whistle and, 1 Boomco...but it would be a pain to reload.
The power might also be shot, pun intended, after all, all the round types might be too much to get good range with, similar to the problem with the 10 shot ablsolver.
Indeed.
It cannot fire reactor balls and pegging someone with a reactor ball at 30 feet sounds glorious. Perhaps a shortened reactor tube that holds 3 balls? Or even the tightening ring end turned around to hold the ball then have some length of it as semi active barrel for direction? It may even be the right inner dimension to stuff the demolisher rocket into instead of the traditional peg firing.
Watch the addendums. I made a barrel for Reactor balls.
"That just seems dangerous and unnecessary."
Uuuuuuh, Chaylo, you ARE aware of the blaster you're talking about, right?
:D Ok, so the real reason is I don't have gotten around to finding the right sized pipe yet...
I thought you were just thinking of the drain blaster at the time
some ammo types youre missing: old nerf balls, boomco rounds (the grenades, not the darts), and zing ammo.
I covered the old Nerf Balls in the addendum video. The BoomCo ball things were mentioned before, I don't have any or even. If I get some I will try it. The same goes for Zing ammo. Thanks for the suggestions!
no problem. didnt see the addendum vid in the recommended, and if you cant find boomco balls in stores, www.amazon.com/BoomCo-BOOMco-Ultimate-Rounds-Pack/dp/B00MFPBW4Q/ref=sr_1_2?ie=UTF8&qid=1479261377&sr=8-2&keywords=boomco+rounds
What would happen if you blocked off half of the barrels on the 6-barrel cylinder?
I imagine it would increase the range. I want to get some extra Sledgefire shells and make some three round absolvers.
Sometimes I wish I was into the Nerf hobby so i could put all the random knowledge i have acquired watching youtube videos to some kind of use.
Seriously, I'm subbed to like 3-4 Nerf channels and haven't used a nerf blaster in years.
I have a really cool idea you should try to make this into a revolver for exple if it used a hammershot barrel have it puff out a fifth of the air each shot i dont know if its possible but might be worth a try
What size cuppler or bushing or whatever it’s called, do you use for the hammer shot cylinder?
The one in the Home Depot plumbing aisle that fit. I just brought the cylinder to the store with me. :P
I think EIR needs more maverick and hammershot cylinders. (Might send them if i get a PO box #)
It is on my About page and in the description of pretty much every video. ;)
Oh! Sorry...
Please do a firing demo for all of the ammo and try firing stefans
I will be doing firing demos for it next. It was too late and dark tonight.
Chaylo Laurino ok
Could you make a build video for the drain blaster absolvers?
I already did. Check my channel. I have posted a Build video and an Addendum Build video.
Chaylo Laurino awesome, those covered all my questions about the absolvers.
Awesome. Glad to help.
20mm thinwall PVC is a tight/twist fit for MEGAs, and does better than stock barrels
So I have heard but I have yet to find any locally.
Captain Xavier Yeah, I bought mine from Amazon when making a MTB style sledge fire, so I have some laying around.
Have you done a mega shotgun absolver with the cyclone shocks cylinder
Not for EIR but I have for a drain blaster.
Kool
Is there a firing demo of the Demolisher Rocket?
Nope
Aw heck. I'm real curious about the ranges you get vs the stock demolisher ranges
How much is a commission
will you be making an accustrike dart launcher or will it fit with elites?
As far as I know they are compatible with Elite blasters.
Will you show the rest of you equipment that you didn't show on walcom's channel?
Your**
Yes. I plan to eventually go over all of my gear. It will take a while...I have an unnecessary amount of gear...
Chaylo Laurino everything for any occasion, which is why I love EIR
Could you do a firing test of all these?
I did. Check my channel. There is an EIR firing demo video.
This is a little late I've been watching your videos for a long time but I just realize that you said what barrel fits a mega dart better I'm sure that because when you go to rifting you pick up a little recon's and some of them might have the barrel attachments the inside of a retaliator or recon front barrel attachment the inner barrel in that the orange barrel it makes a perfect seal
Hey yeah? I will check. I have lots of Recon Barrels.
I understand that this idea is very dangerous but for very long range purposes you could make a Steffen barrel
Most Steffens will fit in the streamline barrel.
Captain Xavier ok that makes sense, btw thanks for actually replying
also are you gonna make a vid on your shoulder cannons also can u make a titan shoulders attachment
It is on the list. Most need a little work yet.
I already have a Shoulder mounted Titan
Also can it fire crossbow rounds love your content
chiwawa9000 ! I don't think so...I don't have any to test with. I will have to look into getting some.
Titan rockets maybe?
Sadly the way it is integrated makes firing Titan rockets off the Titan impossible. Ironic, right?
do you have a link to the bike pump you used
No. I bought it at Walmart years ago.
Everything unnecessarily dangerous is always fun
Also I have a pipe that can shoot a single boom Co. dart how can I get it to you
That depends on where you are.
Alabama
Well I am in Tacoma Wa...so the opposite side of the country. Mail is probably best. chaylo.laurino@gmail.com. Email me and I'll send you my address.
I love your mods
You can't fire koosh balls or old school Megas
Someone mentioned the old Megas and I used to have one...but I think I lent it to Walcom when I lent him two of my old mega blasters to do Tag Back episodes on so I can't test it to see if it fits any of my current barrels.
By the Gods you are right! I cannot fire the big green Koosh balls or the small orange Hog Wild balls. I have both of those...to the shop!
You should make a shrapnel attachment
Cody fernando I an intrigued. Care to elucidate?
maybe make a longer disk shooting barrel with a peg in the back to keep them from slipping back too far so you can shoot maybe 3 or 4 at once or shoot just one better
Certainly worth a try. Someone else suggested a peg on one side to try to create spin. It definitely needs something.
When the accustrike darts come out are you gonna use em belive it or not there more accurate
Probably once a cheaper knock off version hits the market. Then I will buy in bulk! :D
Some types of pet g are good for mega guns
You know the big boy ones that drac uses somtimes
Was this meant to be a reply to another comment? By itself it seems to be missing some information. :/
Wait, do you not have an attachment to fire Titan rockets? Or did I blatantly miss that part?
Oddly...no. For various reasons. My shoulder Titan does though.
Kind of ironic in an entertaining way.
Right? When I first integrated it I removed the thread that held on the Titan barrel. I probably could make a barrel that would fit a Titan missile but...I have Titans for that. :P
But it has to fire EVERYTHING!
*sigh* I will add it to the list.
You should put a boom co pice
3 quater inch cpvc works for mega darts (Kai Mackinnion)
I think that is what I am currently using. I could be wrong though. Thanks!
What about a duck foot rival attachment 3 or 4 barrels
Someday...
I thought the discs attachment was a vacuum cleaner attachment just looking down on it :-p
It does rather resemble a vacuum attachment! XD
Make an attachment that fires old school megas
I am working on it. I have to get my hands on an old mega dart first. I had one...but it is AWOL.
Heeeeeeel yee boi ooohhh ooohhh yeet
The only other type of ammo i can think of is the terrible rebel arrows. i mean to complete the set you can but no one uses them because they kinda suck.
ohh there is also titan rockets and matel ultimator rockets!
You should make a titan attachment so there is one big rocket sticking out of your gun
You would think, given that it is powered by a titan, that I would be able to fire Titan rockets...but not so much. However, my shoulder mounted Titan can fire Titan rockets...so there is that...
In love =) awesome blaster
Eir is a thing of beauty. I look forward to doing more in depth videos about it.
you can't fire old buzzbee stickies
Actually they will fire out of the whistler barrel. ;)
I thought it was a bit too thick to fit, it has a tight fit in my modded spylight, but that is cool
also any idea how many volts I can put through a stock stryfe without a thermester before it catches fire, I built a compact stryfe that only has the barrel, battery tray, flywheels, flywheel cage, a 9 volt, and wires, I have it set where I have 2 buttons, one for 6 volt, one for 9 volt, and if both are press at the same time it pumps 15 volts through it, but I feel 15V is still not enough
No idea. I have never purposefully burnt out stock Stryfe motors. Might be fun...might try it when I get around to upgrading a Stryfe's motors...
ok, thank you, I might send you a picture of it soon
do you have one for titan missles?
The Multipurpose Nerfer underslung titan
Oddly enough...no. The way I designed it means you really cannot fit a Titan Missile on it anymore. When I built it I did not have a Titan Missile so I didn't bother to design it to be able to fire one.
You can't fire ballzooka balls! Or the old school giant darts that were only for the cyclotron? I think that's what the name was besides that you got them all! Good job man really nice
Watch the Addendum video. ;) I made a barrel for Ballzooka balls. :D
Also this vid alone gets m a sub
Socks you built Eir for hvz therefore you should be able to fire socks from the titan if that is at all possible
It is and I have. They do not fly well at all.
@@CaptainXavier sorry I made the comment before watching the video
@@mantahcorpproductions2711 wait, did I show it in this video? I didn't think I ever actually filmed it. :P
@@CaptainXavier I meant part 3 of the Eir series where you show all of the different attachments sorry if I woke you up
so i guess you did have a plan for disk's
I did indeed. :D
your all set for afterworlds (I'm the guy with nightmare btw)
I used the shotguns at Afterworlds last weekend to great effect! Got many a puzzled yet impressed looks when I blasted people with it.
I had a team of 4 we where ready to go but didn't over storm concerns next time though
Many opted out because of the storm...that never came. It rained every damn second we were there but no wind. The next game is in April and will have a massively update rule set. Should be awesome. You should all join me in Citadel and help pacify the Waste!
Nerf ultra darts?
They are the same size as old mega so, yup, got them covered already.
Master, can you teach me the vays af NERF modding?
Um...watch my videos as they come out? (shrugs) Unless you live in the Tacoma area that is really the best I can do...
I know, I was being "sarcastic"ly playful
I caught that from your clever use of spelling to convey a humorous accent. ;) Let me try a more fitting response:
Indeed, my young apprentice. Heed my vords and emulate my actions and you too vill be a master vone day. :D
Ja, Master Chaylo
Captain Xavier can you make me a nerf fully automatic retaliator pls:-P send it to me at 2081 lavila ave FL
Do you carry socks in your load out?
Ps sorry keep commenting so much, I just really enjoy your vids
Austin Burkett Kind of. I carry a pair of foam stressball grenades (see my plate carrier video). In HvZ they act as socks. Feel free to comment all you like.
Maby you can make an attachment that can fire sock bombs
Already did. :D
Cool
can it shoot hyper
Yes
25mm Australian conduit will fit mega's well
Someone mentioned that! Any idea what it would cost to get some here in the States?
Not sure. I'll have a look for you.
About $32 Australian about $25 united states dollars
hmmm...I will look around and see what I can find. Thanks!
If you need send me a message i may be able to help the Conduit itself cost $4 dollars for 4m
What does EIR stand for?
It has several meanings. Mostly it means I am a huge nerd. It is spelled either EIR or IRE (pronounced the same) EIR is the name of the Norse Valkyrie of Mercy (the Eldar Futhark is ᛖᛁᚱ). IRE means Wrath (from the Latin Ira) . I built it to kill Zombies. I believe that killing Zombies is a mercy and Zombies piss me off.
As an acronym I say it stands for Elite Infantry Rifle.
Thanks, i thought you meant ire before i saw it written down anyway! You are indeed a huge nerd.
Right? History, language, puns, anagrams, kids toys. All rolled into one.
You should have a barrel that shoots a raw or cooked hotdog 8)
Get the 22 round banana magson taobao from worker or F10005
I would...but my ammo counter does not have a setting for 22.
Captain Xavier ok, but maybe in the future if possible you could try and make your ammo counter go to 22
Still can’t fire mega xl
Yes it can. In fact, it could fire Mega XL years before Mega XL even existed. The first attachment I made fits Mega XL.
You can not fire Ultimator missiles as of the last time I spoke with you.
hmmm...what is the diameter on the barrel of the Ultimator?
Last I checked it was about 2 inch in diameter.
Then I might be able to fire it actually...I will check something.
You should fire ultimator rockets
make a custom PVC cylinder that's 7 shots 6 outside 1 middle out of PVC pipe. it'd give you no dead space and stait pressure behind
What will happen is all the pressure will focus on the middle barrel. It will fire far, the other six might not fire at all. I tried this with the Legendfire cylinder.
you can't fire arrows
...yet...
I know this is an old video but you can make perfectly functional Mega stefans from 3/4" foam backer rod/caulk saver. I'm still trying to find a good weight but I use a spent .22lr casing and hot glue for now. I'm pretty sure that Mega darts fit in schedule 40 3/4" PVC pipe really tightly. Just trying to improve on your design for the underbarrel launcher.
NO! Just no! Under NO circumstances will I EVER condone or tolerate someone putting METAL in Nerf ammo and firing using compressed air. That is unsafe on a level I cannot even begin to fathom. If you need more weight use a denser foam or a layer of rubber covered by more foam. NEVER put metal in a Nerf Dart. It is not just unimaginably unsafe it is boardline illegal. You have essentially created a pellet gun at that point.
I don't ever shoot those at anyone, this is just something I use in my garage. I completely agree with you about not shooting it at anyone, I have a safe variant using putty as a weight for that. I'm just trying to determine the proper amount of weight for maximum range. I have no plans to ever actually use these things with metal weights. Do pieces of yoga mats make good weights?
Oh good. Measured amounts of putty would be a great way to experiment.
Yoga mat or craft foam is usually dense. You can also get either rubber gaskets or just sheets of rubber. A layer or two between the backrod and some kind of softer head would add plenty of weight.
make a absolver that shoots foam earplugs
...you sir...are awesome. I am soooo doing this!
Make an attachment that’s just a handle facing backwards so when you run out of ammo you can fire your whole blaster 😂
use the barrel from a mega centurion barrel attach
Steve W that won't work
cant fire boomco darts
Keagen Fisher Yes it can. 8 of them at a time in fact (cylinder on the far right). And if you watch the addendum video I recently made a single shot BoomCo barrel as well. :)
This needs a brass breech system and a rayven stalk
Evan Hoing "stalk"
Ultra
You haven’t made altra
Yes I have. Ultra fits in the very first barrel I ever made. The one that fits whistlers and old mega also fits Ultra.
Hey captain Xavier you can't fire stomp rockets
Sean Smith yes, I can. They fit on cpvc and I have a cpvs barrel.