Вставка
- Опубліковано 26 вер 2024
- This video is about the #106 Build a DIY electric board 2021 for street type
Music by Tokyo Music Walker - Sunset Drive
INSTA - / kamijuins
E-mail - j3i3s3@gmail.com
Parts Infos
Deck: GLOBE
Trucks: Trampa ULTIMATE ATB TRUCK
trampaboards.c...
Motor mount pulley kit: Trmapa Original STREET Carver Motor Mount with Motor Axle Support & Pulley kit - TWIN
trampaboards.c...
Motors: Flipsky BLDC 6384 190KV 4000W
flipsky.net/co...
ESC: Dual FSESC6.6
flipsky.net/co...
Remote: 2.4G Nano Remote
flipsky.net/co...
Switch: Anti spark Switch Smart Enhanced 200A
flipsky.net/co...
Wheels: MBS All-Terrain Longboard Wheels
www.amazon.com...
Bearing: 10mm x22mm x6mm Ball Bearings
www.amazon.com...
Spacer: Trampa
trampaboards.c...
(Find the size you need and buy it)
Carbon fiber sheet: 3k matt twill 3mm (400x200)
ko.aliexpress....
Riser pad: MCB 1/8" Shock Pad Risers
www.amazon.com...
Search and purchase locally
4MM Bullet AMASS Connector Male&Female
XT90 Male & Female AMASS Connectors Plugs
Hex Spacer Nut: M4 size 25mm, 30mm
Dome head Hex Bolts: M4 size 15mm
Countersink Hex Bolts: M4 size 25mm
Cable ties
Heat Shrink Tube 10mm
Interior Film Sheet or car film sheet
PVC foam tape 15 mm (wide) x 10 mm (height).
It tried again by improving the lack of e-board that I made last year. I also enjoyed while building and I love the balance of looking. I want to check if the improvement has been made :)
작년에 만들었던 보드의 부족한점들을 개선해서 다시 도전해보았습니다. 이번 빌드도 재미있는 시간이였습니다.외형도 잘나온것 같아서 마음에 듭니다. 개선이 이루워졌는지 빨리 확인해보고 싶습니다.
너무 단단해보인다ㄷ
watch you from germany , that is one of the nices build i seen on e- boards. great work. cant wait for a ride video^! Nice Job!
@@SCW82492 Thank you for watching :) Vielen Dank.
Any chance you could post a link for the battery pack?
@@fluke307 The reason is to set up the right battery for each person. 12s(42v) or 10s(36v) And capacity
oh man, the cable combes are just stunning to look at
One of my subscribers recommended this method to me. It's a work I liked too. Thank you for watching :)
this is the perfect example of craftsmanship and a love for what you do!
Thank you sooooo much for saying that and watching :)
The way you tidy the power chords with the zip ties and chord holder is very artistic. I might try to do something similar.
Yes you should try :) It's satisfactory work.
@@KAMiJUINs also the Hex M4 long nuts are a nice touch because they add a metal pillar look to contrast the wooden deck.
I was empress too great job most definitely 💯💯💯💪🏾💪🏾✌🏿
ua-cam.com/video/fzAo-OqZ_54/v-deo.html
ua-cam.com/video/fzAo-OqZ_54/v-deo.html
its funny i haddent looked at electric skateboards for about 2 years now, and the ammount of sophistication and elegance it has gotten in the last two years, like propper mounts and casual carbon fiber batery/ecu cover and universal skateboard supsension is quite amazing.
Those are mountain boarding trucks. You don't normally see these in street use, as they cannot be mounted on typical boards, the deck has to have the mounting point on an angle for them to work right. The springs you see serve the same purpose as the urethane bushings on a normal truck.
This board has no suspension. But it IS exceptionally well built.
Same
You have no idea how much your videos are helping me on my own project, which is definitely not a skateboard!
That's great :) Thank you for watching ~
Um the back of the board is giving me back to the future Delorean vibes. IT'S COOL AS HELL
Thank you for watching :)
OMG, now I see it. Niiice
@@danielwhyatt3278 RIGHT!?
The only time I saw zippers turned to art! My OCD levels went crazy! I shows you love what you do!
Thank you for saying that and watching :)
That's easily a $1300 board in just parts. not to mention the beautiful workmanship of this man! amazing job.
Thank you for saying that and watching :)
I’ve been looking for a video like this forever
Thank you for watching :)
"Now ride it."
Maker: "Eh what?"
You make it look so easy... My first build was headache after headache
It always looks easy in videos. I also go through several revisions while building it :)
Thank you for watching~
영상 잘 봤습니다.
대단하시네요. 👍👍👍
시청감사합니다~
Ok, can I say that you're the tech's technician! Damn son, you have skills. That's a really, really nice fabrication job on the board, layout, drilling and the wire/cable management is outstanding. Your music is snazzy, too. This video makes me want to ride one these things. Maybe I'll make one for one of my kids.
Thank you for saying that and watching :)
Great build. Now you need to look at 3D printed parts. MarkForged printers can print carbon and metal parts. The cost of these printers are coming down. Thanks for the excellent build bro. You’re almost a ESK8 Boss-builder. Cute pooch/inspector.
Thank you for the info :) I checked and it was a printer I really wanted to have. But it's a little expensive to buy as a hobby. HaHa
Thank you for watching~
Never get bored watching a build vid from you bro. This is an interesting design. I look forward to seeing the ride test ;-)
Thanks for always bro :) I haven't ridden it yet, but I hope to get as much riding performance as I thought.
Totally agree, so happy I just found this channel
Very good craftsmanship.. Mechanical details very good calculated.. Congratulations..
Thank you for watching :)
The degree of detail you have, fascinates me
Thank you for saying and watching :P
It's a beast absolutely lovely
Could you plss send an elec board to my home I really love these vids. A lot of love and nostalgia energy🤘🏾💯
First time ever coming across your channel. Excellent building and well thought out construction. Always wanted to build an electric deck and you’ve inspired me. Already saving up to start ordering parts based on your build. Already excited for your next build. 👍🏼👏🏼👏🏼👍🏼😎😎✌🏼
Thank you for watching and i hope you doing well as you want :)
yo how far are you on starting do
@@romeostrose9937 Since found out that they’re illegal to use on public roads & footpaths in the UK - stupid law that also makes eScooters & some ebikes also illegal to use. If you get caught by the Cops whilst on it the can confiscate it from you and send it to be destroyed and then slap you with a several hundred £ fine (and points on your licence weirdly) People have been getting away with scooters over the pandemic but now things are getting back to normal the Pigs are starting to come down on people again. So, having weighed up the risks of loosing about £300-£500 worth of a deck I’m waiting till the law changes. I still really want to build on, just have to wait about a year or two whilst the UK Government argues things out - hopefully waking up that electric things are better than fossil fuel transport. If you wondering why it’s illegal, it has to do with registration taxes that get collected, along with old laws from the 1800’s and 190’s that haven’t been updated and so they are still active. Everyone knows they’re stupid but it’s hard to get them changed with the Government changing them in Parliament. Keep you fingers crossed for everyone in the UK that the Government wakes up and changes the laws for us. Sorry for the long answer but needed to explain everything so it made sense.
The wire tie dress in was a really nice touch. It’s the little things.
Thanks~ :)
Work of art
Thank you for saying that :)
MASTER PIECE ;)
I fricken love how you used the zip ties to keep the motor wires nice and spaced out, it looks soooooo guuuuuuud beautiful build as always
Thank you for watching like that :)
It's soooo good to see you crafting something wonderful piece by piece. Kami is happy too! I love the colors
Yeah I like the color match too :) Thank you for coming as always~
보드가 예술이네요 디자인이며 성능 모든면이 넘좋네요 판매도 하셔도 대박나시겠는데요 제가 본 보드중에 젤 멎지네요 보드 만들기 장인 이신데요
판매도 가능한가요? 넘 이쁘네요
시청감사합니다. 아직까지는 개인적인 취미로만 즐기고있습니다.
My goodness this is beautiful.
Thank you for watching like that, Mate :)
That will be one hell of a fire with that lipo.
Wow. One of the best things i've watched today. Good job, bro.
Thank you so much for saying that and watching :)
Waaow! Just waaow! So Much talent! Thats what i want for christmas 🥰
Beautiful ❤️ absolutely love your style of video making, I enjoyed the everything but the paint stickers. As a boat guy I would have used colored S-,Type fiberglass and resin. S can flex as well as add massive strength for very little weight. Add titanium dioxide directly into resin. Added benefit scratches could be sanded off and buffed out easily.
Thank you for watching with your suggestion :)
Blimey ... you now how to keep ups hooked lol looking forward to the test ride 👌🏼
Check the video #107 please~
Haha yes watched straight after, didn’t see the date of release 🤦🏽♂️. This is a really good build!
Me in the beginning: "I love DIY engineering!"
Me at the end: "Omg so beautiful! This is art."
Thank you soooo much :)
Precisely!
You make the best enclosures. You should do a video of all the best and worst enclosures you've made, and how to measure and prepare one.
I find it quite curious that you picked 'NHS Prosthetic Limb' for the colour.
Made me spit out my coffee. LMAO.
I call it "Hearing Aid Beige"
@@nickvanrooyen3247 Fiat literally sell a 500 that exact colour. And people buy it!
I won't show any blood when he crashes
@@johnland7318 and wil remind him how skin is supposed to look after a crash maby a different tint but it gets the point
Music and board both awesome
Thank you for watching :)
really cool, awesome editing too. Appreciate all the angles and chill music.
Usually, people who watch videos only care about the topic, but I try harder to pay more attention to them(angles, Music) in the process of making video. Thank you very much for recognizing them :)
영상 쭉 봤는데 진짜 손재주 좋으시고 깔끔하게 작업하시네여
:) 네~ 시청감사합니다!!!
this enclosure is sick !! and..don't forget to give kami his snack he asked for xD
Hey, my good friend :) HAHA KAMi always eats a lot of snacks :)
And I want to tell you that if someone weighs a lot, split the enclosure into a few parts rather than one piece. even the deck I used is quite stiff, but still it can be a lot of pressure.
The wiring process is beautiful.
I also applied what I saw somewhere :) Thank you for watching~
New Kami Juins video = Today will be a good day :D!
Much Love
// Robin - LAZYROLLING
Thank you so much Robin :)and I hope Ralph get well soon!
What attention to detail! So satisfying to watch this video!!!
Thank you for Watching :)
@@KAMiJUINs your most welcome 🙏
magnifique electric board 2021
Merci de m'avoir dit ça :)
The most satisfying part was the zip ties
Thank you for watching~
Interresting design and very well manufactured.. But tail and nose are unuseable which is essential in town.
From youtube showing a recommended video to a sub from me. Keep riding my dude~
Thank you sooooo much for coming my channel :)
That is some of the cleanest work I have seen so far. Great job.
Thank you for saying that and watching :)
yoooooo sick board! what kind dog is that at the end, super cute!
Thank you for watching :) KAMi is a toy poodle~
Damn this guy makes sick Eskates
Thanks~ :)
Yeah everybody has these parts laying around
한국분이시네? 나름 외국 유튜버 못지않으시네? 영상퀄리티 좋으시네? 전동보드 성능 확실하네? 설명 나름 디테일하네? 좋아요, 구독 못참겠네?
Links to all your materials? You should do affiliate referral links so we can build one too and you can make a little money off of it.
If it was sponsored video, I would have did what you said :)
when I have time, I will put the link of the parts in the description box for subscribers. Thanks~
Beautiful. Wish you beautiful ride.👏👏
Thanks~ :)
This board was like a Bob Ross painting at points I was like oh no it's ruined only to change my mind a few seconds later
Wow. Incredible workmanship and video editing.
Thank you for watching :)
Where do you get the parts from ? Ali express ?
Google the names of the parts in the video and you'll find out right away.
Most of the components were purchased directly from the Trampaboard and the Flipsky homepage.
Thank you, very inspirational and well done. I would add a few more black and orange details.. just my personal opinion
All your videos are truly a masterpiece an I all ways love watching them
Thank you so much for saying that and watching :) mate~
No problem your my favorite esk8 UA-camr
Give a snack to the dog NOW!!!
Yeah! I will~ lol :)
Wow you really put a great emphasis on design, well done!
Thank you for saying that and watching :)
Great job , perfect and nice , i want the same :) good vidéo ☺️👍 a blue thumb with pleasure
Thank you for saying that and watching :)
Avec plaisir , tu es vraiment très fort , et je respecte beaucoup cela :)
Merci a toi pour cette superbe vidéo :)
Continue comme ça ☺️👍
카본 플레이트에 모터를 고정하는 볼트도 와셔한장 써주시면 더욱 좋을 듯 합니다. 영상 잘 봤습니다. 관심없는 분야인데도... 끝까지 보게되네요
Good fabrication
Thank you for watching.
Like your sharing skills....thanks
Thank you for watching, too :)
디자인 감각이 정말 뛰어나시네요
이영상 보고 저도 전동보드 만들기 도전할려고 합니다 ㅎㅎ
아 그렇게 보셨나요 감사합니다 ~
When I was sixteen, I bought an old skateboard that was powered by a chainsaw motor. No clutch, just a hand throttle. It was the most dangerous thing which I have ever owned. One mistake and you would roll-over on the ground about ten times, and break the damn spark plug. But it was fun.
I know what you saying :) Thank you for watching my video~
this is insane. i tried to pass the time until i have to leave for work. i did'nt expected to find something so inspiring :) i love what you did!
Thank you for saying that and watching my video :)
Very nice build. Great job
Thank you for watching :)
The best part of this video is the puppy. ☺️🐶
Thank you so much for saying that :)
The satisfaction this video gives....truely a masterpiece...👌🏾🚀🔥💯
Thank you for saying that and watching :)
Very nicely done clean just trick I like it a lot. I like your zip tie trick too Learn something new every day we’ll try to anyway don’t always happen LOL
Thank you for watching :)
Very cool build I want to make one now x
Why not HaHa :) Thank you for watching ~
@@KAMiJUINs watching your other vids now. Great stuff xx
Wow everything about this video was dope asf. Excellent craftsmanship.
Thank you for saying that and watching :)
I'm digging the music here
Audio Library - Music for content creators "Tokyo Music Walker"
@@KAMiJUINs you have good music choices on your videos man
Thank you for saying that and watching :)
@@KAMiJUINs u can trust me with that comment. Im a legit musician, and ur choice is my way of music.
I loved Original sound
What you mean is a video without music? Like ASMR? HaHa Thank you for watching :)
@@KAMiJUINs no sound your working stuff... You awesome support you from Indonesia
Great looking board. Real craftsmanship.
Thank you so much :) I hope to be a craftsman too.~
This build made my day. Amazing video, audio, build sequence and what an absolute sick skateboard!! Bravo!
Thank you so much for saying and watching :)
Different level
DIY.....
Thank you for saying that and watching :)
Its looks to good to drive ;) no shoes, only indoor
That's very pretty.
Thank you for watching :)
When you find out how everything is so perfect!❤️
Thank you so much for saying that and watching :P
@@KAMiJUINs keep it up bro B)
ua-cam.com/video/fzAo-OqZ_54/v-deo.html
ua-cam.com/video/fzAo-OqZ_54/v-deo.html
Nice trick with the zip ties! Im stealing that!
Up to you :) Thank you for watching~
Lofi with the diy 👍
Thank you for watching :)
언제나 마감이 깔끔하고 하나의기성품처럼느껴져요! 조만간 런칭하시겠는데욯ㅎ
아닌데욯ㅎ :) 시청감사합니다 ~
외국 채널 영상인줄 알았는데 갑자기 한국어가 나와서 "유튜브 기술력이 벌써 이 정도 까지..?" 싶었어요 ㅋㅋㅋㅋㅋㅋ
편하게 잘 봤습니당ㅎㅎ
시청감사합니다 :)
Dude!!! SIIIIIIIIIIICK ASS board!!!!!!!
Thank you for saying that :) Dude~
정말 나이스하네요~ 아이디어 너무 좋고, 깔끔하고 편한 영상👍🏻오늘도 잘 시청 하고 갑니다. 감사합니다good kami🐶good job
정말 감사합니다 :) 항상 까미가 열일 하고 계십니다.ㅋ
very clean build !
Thank you for watching :)
beautifully crafted
Thank you :)
J'ai eu beaucoup de plaisir à regarder cette vidéo...merci beaucoup ! C'est vraiment du très bon travail, c'est parfait ! 🦾
Merci de le dire et de regarder :)
아이디어가 참 좋으시네요 많이 배웁니다!
네 시청 감사합니다~
The parts descriptions were awesome. This is a really cool project.
Thank you for saying that and watching :)
Get black silicone dude. Nice work matee🤙👊🇦🇺.
Thank you for watching :) I will ~
looks awsum dude 10/10
Thank you :)
I like that zip tie idea 💡 simple and clean
One of my subscribers told me this good way :)
You bro like for real you should start up a Kickstarter for this beast all my skater homies are crying for one. I would support you and so would all my guys.
However, price and delivery are the problems. Also our customs laws will refuse to allow this too :(
But Thank you so much for saying :)
"That's what I'm talking about" then I clicked play ^.^
Thanks ~ :)
Awesome build. And also that cable management is dope.
Thank you for watching :)
I love this guy
Thank you so much :)
That's a very clean and nice build. I tried 10mm inner diameter bearings for those trampa street caver trucks which doesn't works perfectly. trampa offer 9.525×22.225x7.14 bearings do a better job but so hard to put them into street wheels. Finally i found 9.525×22×7 in a bearing shop😂
You knew that, too lol :) So, that's why I prepared both.
Good job bro~
If your able to put bigger wheels it would be the ultimate offroad board
Yes, it can be :)
퀄리티가 상당하네요. 바퀴는 좀 둥근것을 채택하셨으면 훨씬 안전할꺼 같습니다.