AUX DIY BMW Reverse RDS BP4836
Вставка
- Опубліковано 7 вер 2024
- This one is going to work in place of AM radio. Sound quality crystal clear. In my case cassette unit is going out, but you can leave it in fully working order if you want. AUX is going to be activated with original AM radio button.
Facebook: / 1481523692161460
My other channels:
TickleToes1992 - Life & Music / tickletoes1992
MegstuBMW - Auto. / megstubmw
MindSet - Technology, gaming. / liukas1992
Hello, I have a Reverse RDS radio like this One with the Reverse button not working (I feel it like disconnected After pulling and the tape doesn't switch from a side to another). Any idea of what it could be and advices to fix it by myself, if possible? Thank you very much
Small advice: use a bigger capacitor (something like 2.2uF) because 1uF is gonna take away the low frequencies. How lower the frequency, how bigger the impedance the capacitor will show.
+bavarian34 do you think this one will work?
Elko 2.2 uF 100 V RM 2 mm measurements: 5x11 mm
Hi, maybe you can help. The capacitor that is soldered straight to the chip is not working. Tried it without the capacitor and with. What should I check?
Thanks!
Hello , i understand correctly ? -> if I do not want to touch the tapes and FM radio, but only AM, I just do not touch the cassette capacitor?
How do you remove the BMW Reverse RDS? Are there any screws in those 4 holes, or just keep the device from those 4 holes and pull it out?
You have to insert something in to all 4 holes and pull radio out. There is a special tool for this.
I know the video is quite old now, but you might remember. How did you remove the cassette wire? The brown one that seems soldiered to the PCB
Hi, you need to unsolder it.
May you send a link for the wiring diagram of the stereo because there are wires that i’m confused how to wires
Thanks
Hi, I have't got wiring diagram :-) .
I need help replacing the lcd screen mine has dead pixels
is also Possible with the Business-RDS-Kassette?
After this mod kassette is still working if you do not touch kassette capacitors.
@@MechanikasLukas
Do you have instructions on how to convert the Business RDS cassette to AM transmitter
I want to keep the cassette.
@@FischersGarage I do not understand your question. To keep kassette you just leave kassette capacitors in original place and just buy and use new pair for AUX mod activating with AM radio like I show in this video.
negativo?, red ok, white ok
When i do it like you but put the casette unit back i can use the casette unit without problems ? Or do i have to use different capacitors ?
Hi, You need to buy new capacitors and leave tape capacitors untouched.
megstuBMW I still dont get it. I could buy a 2,2 uF capacitor and use it instead of the first one you removed.... But how can i leave the second tape capacitor untouched?
Great manual by the way.
And sorry for the stupid questions ;D
Capacitor for right channel you need to solder directly on TDA controller leg, just in a different angle, because that tape capacitor is in original position.
megstuBMW Ah okay. Thank you very much.
No problem :-)
good afternoon. please tell me, and BMW Bavaria C Reverse RDS BP1836 can do so via the AM was the inclusion? I saw you do so at BP4836. Thank you!
Hi, yes, you can do on both of these aux in place of AM, or tape, or FM. Both radios using same chip, you just need to find where is AM channels and do the same as with bp4836 (it is possible that on bp1836 AM channels is connected on diferent chip legs, so you need to comfirm that).
+megstuBMW I'm pretty bad in this understand. Chips with a label, but apparently large differences from your circuit. I can contact you if will not understand?
Yes, you can write me if need help.
+megstuBMW and you do not have to adapt, such as a tape recorder with me? or it may have the opportunity to portray in the photo that needs to be done. I have more than a week I fight, I do not understand anything. Thank you so much!
I am not sure that I understood you correctly, but if you going to do aux in place of AM radio, than you do not need to do any modifications with tape unit, you can leave it working as normal and untouched. I can make photo what pins in bp1836 radio is AM and where to cut, than you need to do same as I showed in aux diy for bp4836. Also, if you want photos, I can make them the ending of this week.
Kokia čia daina groja ant galo?
Alone by Reaktion ft. The Eden Project
Sveikinu su 1099 prenumeratoriais:D
Na ačiū :-D
+megstuBMW :DD
👍🏽