I'm really excited for these - Solink budget brushless motor and improved gears!
Вставка
- Опубліковано 16 лип 2024
- Man am I glad to see the sector gear with delayed tappet post! Only if they were out when I started lol.
It's rarely seen in Airsoft a big company innovate and push out products that are actually improved, kudos to Solink for that.
Link to the budget motors: solinkmotor.com/product-categ... - Розваги
Just got their 39k brushless. And it really tranformed my aeg, with 13:1 gears the trigger response is immediate with no precocking. And the rps is about 35. Insane.
Hi, interested in doing a review on t238 blue brushless motor?
So I’m interested in the solink motors with the single direction bearing. But if there’s no arl then what happens when the motor is pulled out? Wouldn’t the gears spin backwards possibly damaging the rear of the piston? Also, if the entire gear train is being held by just the bearing in the motor tower, how much stress can it really take? I can’t see a bearing alone supporting the force of a high power spring like a m160. And if that bearing fails wouldn’t you need to replace the whole motor? Thanks for the advice!
The axis of the motor is the best place to brake as it has the lowest torque/stress applied. You do need to mind to remove the precock before removing the motor or remove the main spring (which is what I do, all my aegs allows me to remove the main spring before having to remove the motor)
@@wyz2285 ah I see. Removing the main spring would certainly solve that problem. Unfortunately not all gearboxes are quick change or quick change enough to remove the main spring without removing the motor first. But even without precocking, most etus cycle detection stops the sector so that it slightly picks up the piston meaning it would always be under some load unless the main spring is removed right?
@@jhqtech I can't think of an AEG (that's worth dropping in a brushless) that needs motor removal, also these motors has built in active brake. Anyway, if you have an old AEG without QD spring, just use their cheapest brushless without the anti-reversal.
@@wyz2285 Krytac are arguably the best AEGs out there. Don't have a quick change from the buffer tube.
G&G and VFC also don't have this for like 99% of their guns. The guns with actual QC springs from the buffer are actually pretty shit like Cyma, Specna, Arcturus, etc. So actuslly the good AEGs dont have it
Release date?
Already out on their website.
@@wyz2285 Appreciate it. Loved the vid, Just found ur channel and subd.