I am thankful for going to an American elementary school in the Persian Gulf. I managed to migrate to USA, and soon will be a citizen. I think I will celebrate that by buying my first AR. Long live the greatest nation on earth.
Glad you made it here and as a naturalized Citizen I hope you enjoy the rights and privileges afforded you. I would also hope you'll help protect them.
@Jon James No doubt, and these Lehigh Defense bullets are all copper monolithics which allow them to spin at very HIGH rates, in fact Lehigh Defense spec's out 4,100+fps! Stay tuned for a slomo gel shot next week!
Always love your videos but just can't warm up to the 350 legend. I had high hopes when it was first announced (all speculation) that you could manufacture your own brass using .223 brass, that .223 mags would work and so on. Came out and I just can't find a compelling reason for buying one (live next door in IN, Neighbor!)
@Yissnall Lives! I hear ya Brother! I was in the same boat. I purposely waited to see how things were going to shake out. Now that I have a decent barrel, AND this one important detail. Lehigh Defense is working on a 350 Legend bullet, I hear that it will be a Controlled Fracturing design, and I am excited to see how it performs.
compelling reason? How about having the worlds most badass 9mm AR that'll outperform the 357 Maximum. And it's cheap to feed. Mags will show up, prices will drop on the brass. I can think of all kinds of reasons to have a kickass gun like this Then again, I don't expect to shoot'em for nothing...
@David Underwood . Go to my www.subscribestar.com/ap2020-outdoors channel. I will be producing a fully detailed reloading video on some of my 350legend reloads next week! Thanks!
I absolutely had tilt issues with my dura 20 rnd. even seen that in the 10 rounders as well. That being said I probably could of slowed the timing on the rifle and had them work. I just wasn't going to tune a rifle for a mag, seems stupid to do that to me. I have since moved to modding 30 rnd gen2 P mags, they hold 28 rnds and are working great.
Awesome video your enthusiasm is always refreshing to watch. But I do have to say... not a fan of the 350... With all the AR15 calibers to pick from these days it just makes sense to stick with 5.56 and 6.5 grendel. Just my opinion though!
Love to see those 90's hit some gel or a meat target, very interesting results. Bet a 124 grain gold dot would make a mess haha. I've ran some of the Rainier plated 124's hp's at around 1,300 fps through a pcc with Longshot and they absolutely splatter. Used one a few days ago to shoot one of our turkeys that needed to be culled (she was laid up in the coop, weighed about 50 lbs and I was afraid moving her would stress her out too much /cause injury). I normally use the 12 gauge but decided blasting a 3" hole in the coop floor or wall wasn't the best idea. The 9mm took that birds head off, looked almost the same as when I use the 12 gauge actually, just a tad more localized. Pretty much vaporized a 1.25"x1.5"x2" area of flesh and bone.
@Colson Customs A Speer 124gr Gold Dot lead core bullet would disintegrate at these velocities. Only the all copper monolithic bullets like the Lehigh Defense can survive these spin rates!
@@AP2020_Outdoors Ah, that's a good point. I've considered getting some of the 125 grain gold dots for the 357 sig for full power 9mm in the pcc so that the bullet will expand correctly.
What's the load data for this speed? Also how well do you think this will perform on deer ? Out to say the further end of the 350 legend ? ..I'm currently getting a bolt gun in this caliber for hunting is why I ask
@Doug Hart Accurate No.11 FS, I typically do not reveal my supersonic load data. However, I can tell you that the load has ZERO pressure signs, and ultimately a lot of my reloading data gets published by Lehigh Defense in the long run.
Good morning! I'm not asking for data. (I don't reload) There has been a couple people trying to get a 200 grain 350 legend to reach 2000 fps. That's a lot of lead for a 350 legend case. With all your data can it be done without case/rifle damage? I say no because Winchester 180 grain is just breaking 2100 fps. 200 grain at 2000 fps, That would be a thumper! Lol
@Nathan I typically do not publish my supersonic reload data for liability reasons. However, I have since discovered that Lil'Gun and H110 are returning the highest velocities now. I am going to revisit the 90gr XD in an upcoming 350Legend hyper-velocity video! Merry Christmas!
@jim durnil I only publish my reload data on my subscribestar channel; primarily for liability reasons. I need to update it to show my 350Legend load data.
@Chris Sewell I would venture to say 250 yards depending on the bullet construction. I will shoot the rifle again under better wind conditions to see it's true potential.
@@AP2020_Outdoors I have toyed with the idea of building one or just buying a Bear Creek assembled upper, for hunting. How does it compare to your .300 Blackout, for accuracy?
@Chris Sewell I would highly recommend APF Armory for your next build . They have been very helpful. I am still developing loads in terms of accuracy. I think it is the real deal.
@@AP2020_Outdoors 🤣👌🤔How can you recommend APF to someone who is thinking of using Bear Creek? You can buy at least 5 Bear Creek uppers for one APF upper.
@@SuckItUA-cam19 and have to work on it trim down refit the mags due to feed issues coating will be discolored. Chunky bolt engagement nothing smooth here. Oh feed ramps buy a dremel before you cut your fingers or your brass case. Yeah highpoint of uppers
I am thankful for going to an American elementary school in the Persian Gulf. I managed to migrate to USA, and soon will be a citizen. I think I will celebrate that by buying my first AR. Long live the greatest nation on earth.
Glad you made it here and as a naturalized Citizen I hope you enjoy the rights and privileges afforded you. I would also hope you'll help protect them.
Awesome! I love 350 legend
@WHO_TEE_WHO
Indeed! I'm thinking a collab video this Spring. Have high speed video camera...will travel! ☆☆☆☆☆
@@AP2020_Outdoors I'm always down for whatever!
I’ve been waiting to see some lead free loads for the 350L. My boys and I are loving this caliber and it’s progression. Thanks for all your hard work.
@steve diosdado
Stay tuned for a slomo gel shot next week! Also, Lehigh Defense has a pretty sweet Controlled Fracturing design coming out soon.
Amen brother it's because you're happy. You can find time to be angry and depressed. Or enjoy life in the things you love to do.
@frank marks
No doubt..life is too short!! Thank you!
Amen brother that's what I'm talkin about everyday waking up grateful. God is good.
@frank marks
AMEN!
Would love to see a gel shot with the 90gr! Was impressive on the water jug at 200. 3000fps is crazy.
@David Fricke
One gel shot test coming up! Next week.
@@AP2020_Outdoors yes i will be waiting
3000+ for that bullet, damn... smokin fast. That'll explode anything that has flesh given the bullet design. Nice vid...
@Jon James
No doubt, and these Lehigh Defense bullets are all copper monolithics which allow them to spin at very HIGH rates, in fact Lehigh Defense spec's out 4,100+fps! Stay tuned for a slomo gel shot next week!
Love your attitude man. Don't change.........................
@Christopher Simon
Thanks Chris! I appreciate that!
I'm glad you like this new Cartridge. Looking forward to see all you can do with it.
@North wind
Thank you. Yes, I'm excited to do more tests.
His build are so awesome. Id wish I could get a parts list for his builds
Lehigh doesn't list load data for the 90grn XD. I'm planning on starting with 30 grn of Lil Gun and working up
Awsome video. That's crazy 3033 ft out combo. Like see what do to gel or bone or muscel
@James Pugh
Next week I'll do a gel shot.
Always love your videos but just can't warm up to the 350 legend. I had high hopes when it was first announced (all speculation) that you could manufacture your own brass using .223 brass, that .223 mags would work and so on. Came out and I just can't find a compelling reason for buying one (live next door in IN, Neighbor!)
@Yissnall Lives!
I hear ya Brother! I was in the same boat. I purposely waited to see how things were going to shake out. Now that I have a decent barrel, AND this one important detail. Lehigh Defense is working on a 350 Legend bullet, I hear that it will be a Controlled Fracturing design, and I am excited to see how it performs.
compelling reason? How about having the worlds most badass 9mm AR that'll outperform the 357 Maximum. And it's cheap to feed. Mags will show up, prices will drop on the brass. I can think of all kinds of reasons to have a kickass gun like this Then again, I don't expect to shoot'em for nothing...
Love the channel would love to see the 350 Legend Xtreme Defender and some ballistics gel.
@frank marks
Thanks!! I think that i will have to try that!!!
Just watched this video. Would like to have seen your brass and primers after shots. Also what kind of load weights on that # 11 were you using?
@David Underwood . Go to my www.subscribestar.com/ap2020-outdoors channel. I will be producing a fully detailed reloading video on some of my 350legend reloads next week! Thanks!
Thank you!
Cant wait for some 30rd mags
How is that 20 round mag working out for you??
I heard they were having Follower Tilting issues.
@John Parrish
Perfectly. Zero failures. It even fed the super short 65gr XD's!! I did Dremel my feed ramps, followed by polishing with a wire wheel.
I absolutely had tilt issues with my dura 20 rnd. even seen that in the 10 rounders as well. That being said I probably could of slowed the timing on the rifle and had them work. I just wasn't going to tune a rifle for a mag, seems stupid to do that to me. I have since moved to modding 30 rnd gen2 P mags, they hold 28 rnds and are working great.
Awesome video your enthusiasm is always refreshing to watch. But I do have to say... not a fan of the 350... With all the AR15 calibers to pick from these days it just makes sense to stick with 5.56 and 6.5 grendel. Just my opinion though!
Its because 350 is a straight wall cartridge and that's only what can be used for deer in southern michigan, ohio , indiana.
@Nahla Anderson
No problem! Yeah, I was in the same boat until i started reloading for it...
@Todd R
Indeed.
I am not sure if Illinois is also included?
yeah and Iowa, too
AP2020 OUTDOORS, not north Illinois for sure i'm from there and is shotgun only
Damn again!
How fast are the 118s pushing. Im interested in what u would be getting for energy compared to a 150 grain moving slower.
Awsome vid. Which muzzle break are U using on the 350 Legend rifle. I have a Ruger 350 Legend Pistol, just loving it.
@Bill Geiser
The muzzle brake is made by www.apfarmory.com/ . Very well made and SOLID!
AP2020 Outdoors Thanks!
This another guy on UA-cam that got a little under 4000-fps with 350 legend
@thatone5004 I saw that!
Love to see those 90's hit some gel or a meat target, very interesting results. Bet a 124 grain gold dot would make a mess haha. I've ran some of the Rainier plated 124's hp's at around 1,300 fps through a pcc with Longshot and they absolutely splatter.
Used one a few days ago to shoot one of our turkeys that needed to be culled (she was laid up in the coop, weighed about 50 lbs and I was afraid moving her would stress her out too much /cause injury). I normally use the 12 gauge but decided blasting a 3" hole in the coop floor or wall wasn't the best idea. The 9mm took that birds head off, looked almost the same as when I use the 12 gauge actually, just a tad more localized. Pretty much vaporized a 1.25"x1.5"x2" area of flesh and bone.
@Colson Customs
Next week!
@@AP2020_Outdoors Bad ass!
@Colson Customs
Pretty freaking sweet! ☆☆☆☆☆
@Colson Customs
A Speer 124gr Gold Dot lead core bullet would disintegrate at these velocities. Only the all copper monolithic bullets like the Lehigh Defense can survive these spin rates!
@@AP2020_Outdoors Ah, that's a good point. I've considered getting some of the 125 grain gold dots for the 357 sig for full power 9mm in the pcc so that the bullet will expand correctly.
AP2020: are you using the Lee dies with the collet crimp die?
@glocktard 2120
I am using the Lee factory crimp die = light crimp.
3,333fps that’s just 32fps faster than my 300 Winchester magnum with 150gr Nosler ballistic tips they’re 3,301fps
@Randle Richardson
Indeed, however your 300WIN MAG is pushing a bullet that weighs significantly more! Thank you!
Happy😁👍
@JerrBear Tactical
Copy That!
👍 spot on
What's the load data for this speed? Also how well do you think this will perform on deer ? Out to say the further end of the 350 legend ? ..I'm currently getting a bolt gun in this caliber for hunting is why I ask
@Doug Hart
Accurate No.11 FS, I typically do not reveal my supersonic load data. However, I can tell you that the load has ZERO pressure signs, and ultimately a lot of my reloading data gets published by Lehigh Defense in the long run.
Dangggg awesome
@Jake P
I'm pretty HAPPY! I just got done reloading some more rounds..LOL Stay tuned for more 350 Legend videos!
Good morning! I'm not asking for data. (I don't reload)
There has been a couple people trying to get a 200 grain 350 legend to reach 2000 fps. That's a lot of lead for a 350 legend case. With all your data can it be done without case/rifle damage? I say no because Winchester 180 grain is just breaking 2100 fps.
200 grain at 2000 fps, That would be a thumper! Lol
@North wind well I have 280gr subsonic bullets doing 1,050fps, so 200gr at 2,000fps....hmmmnnn, now you got me thinking!!💯🇺🇸💥
Oh! I was just wondering. If you do come up with something please hit a steal target. The gong show! Lol
You said you dremel the feed ramps. Is that on the barrel or the magazine and was it because of 90 grain bullets?
@Rocky Milam
I slightly polished the feed ramps with some polishing compound.
Where did you find load data for the 90 gran
@brianperrotta8847 I developed my own loads initially using Quickloads software.
What Trigger are you running in that lower🤔
@JerrBear Tactical
Velocity Triggers MPC #3
Finally! Someone other than myself using the 11FS, got any good loads for 300blk?
@Nathan
I typically do not publish my supersonic reload data for liability reasons. However, I have since discovered that Lil'Gun and H110 are returning the highest velocities now. I am going to revisit the 90gr XD in an upcoming 350Legend hyper-velocity video! Merry Christmas!
@@AP2020_Outdoors understandable! Merry Christmas to you, and yours as well!
Amen! Do you have a FB?
@michaelrum7113 facebook.com/archersparadox2020
What is your charge on 180 grain winchester bullet
@jim durnil
I only publish my reload data on my subscribestar channel; primarily for liability reasons. I need to update it to show my 350Legend load data.
AP what is the bore and groove for that barrel?
@Hazcat
SAAMI Spec'd as 0.346" = Bore and 0.355" = Groove.
How accurate and what range, does the 350 Legend have?
@Chris Sewell
I would venture to say 250 yards depending on the bullet construction. I will shoot the rifle again under better wind conditions to see it's true potential.
@@AP2020_Outdoors I have toyed with the idea of building one or just buying a Bear Creek assembled upper, for hunting. How does it compare to your .300 Blackout, for accuracy?
@Chris Sewell
I would highly recommend APF Armory for your next build . They have been very helpful. I am still developing loads in terms of accuracy. I think it is the real deal.
@@AP2020_Outdoors 🤣👌🤔How can you recommend APF to someone who is thinking of using Bear Creek? You can buy at least 5 Bear Creek uppers for one APF upper.
@@SuckItUA-cam19 and have to work on it trim down refit the mags due to feed issues coating will be discolored. Chunky bolt engagement nothing smooth here. Oh feed ramps buy a dremel before you cut your fingers or your brass case. Yeah highpoint of uppers