As someone in the comment said, the level shifter is wrong, it requires an higher pullup like 1kohm at least. 100Ohm si a very strong pull up, 10 is far exessive. Sorry for that!
If you use the square wave, with {D/Fs} as turn on period, just declare .param dd=10ns and then {D/Fs -dd } as Ton period {(1-D)/Fs -dd} as Ton for the other switch be careful with the brackets, you can waste hours for nothing
If you use the square wave, with {D/Fs} as turn on period, just declare .param dd=10ns and then {D/Fs -dd } as Ton period {(1-D)/Fs -dd} as Ton for the other switch be careful with the brackets, you can waste hours for nothing
@@manoA98A I mean with a capacitor or rc network to delay los or high side. Where to insert it and how to best calculate the rc tau time constant or if you have a rule of thumb. Without external micro controlling it
Yes, actually I don't know why I put 10Ohm, as a pull up you Need a Least 1k, 100Ohm Is a strong pull up, probably I forgot a K? Anyway, this was From 1 year ago, now I don't do this mistakes anymore. Sorry for that!
good job, I like this video， comments from China.
Excellent video and well done.
Hi Mano Arrostita. Thank you for the great tutorial
As someone in the comment said, the level shifter is wrong, it requires an higher pullup like 1kohm at least. 100Ohm si a very strong pull up, 10 is far exessive. Sorry for that!
Nice
Amazing
Saludos de Perú buen tutorial el Highslide y lowside puedo hacer un Inverter con esos circuitos?
Saludos de peru
Una consulta el circuito puede funcionar para un puente trifasico controlado por arduino
How do you adjust the dead time? I want to learn that too. I saw you have a dead time generator.
If you use the square wave, with {D/Fs} as turn on period, just declare
.param dd=10ns
and then
{D/Fs -dd } as Ton period
{(1-D)/Fs -dd} as Ton for the other switch
be careful with the brackets, you can waste hours for nothing
If you use the square wave, with {D/Fs} as turn on period, just declare
.param dd=10ns
and then
{D/Fs -dd } as Ton period
{(1-D)/Fs -dd} as Ton for the other switch
be careful with the brackets, you can waste hours for nothing
@@manoA98A I mean with a capacitor or rc network to delay los or high side. Where to insert it and how to best calculate the rc tau time constant or if you have a rule of thumb. Without external micro controlling it
@@robr8554 I Will make a video of how to generate a dead time with and RC network next week
@@manoA98A you are awesome and love your videos
R1 is INSANLY LOW!!!!!!!!!!!!!!!!!
Yes, actually I don't know why I put 10Ohm, as a pull up you Need a Least 1k, 100Ohm Is a strong pull up, probably I forgot a K? Anyway, this was From 1 year ago, now I don't do this mistakes anymore. Sorry for that!
Engineering's schooling full of equations not many of this schooled guys can understand free energy.