I just replaced center. Those two bolts came out not too easy but put them back weren't easy at all. I have to use muscles and do it very, very hard to get inside, now I have noise and same vibration. I replaced the transmission mount as well.
@@asphalt_boxer Suspension component? NOOOOO, I have replaced: Front struts twice. lower arms control with new bolt joint. twice sway bark link and sway bar bushings. Rear shocks. Now I just ordered right mount and see what will happen. I will do a test with the car on and somebody pushing gas pedal in drive and in reverse after I put the right mount.
Happy I came to your page Omggggg I have a 2011 white Kia and got so many things fixed on it. This week. Got a new transmission July 2021 also I’m gonna go check the sound to see if it’s doing this now my water pump acting up and the car engine shaking a little once I stop a stop sign. And then pull off it starting shaking like a feeling of needing a wheel alignment
How those torque is different than other video I just saw front a 2010 Kia soul. you says: 14mm-100 ft lb of torque? the other video says: 40 ft. --- you said: 17mm: 125-130ft, but the other video says: 80ft lb.
Not sure what video you watched, but my torq number came directly from the Kia owners manual and repair manuals. Please note in the 2010 there is an automatic transmission and manual transmission that have different mount locations and different mount sizes. Also there’s a 2.0 motor 1.6 motor.
@@asphalt_boxer I agree with you 100%. My is 2012 automatic 2.0L 4 cyl. yes, you are right, but your video says 2010-2013, so it means will be cover all those years.
How much time does it require to do that labor job ? My Kia has the same problem just saw that until now because the noise kept on so how much is it that a mechanic 👨🔧 charge to do this job I’m needing the job done but don’t want to pay as much to do the work
I just replaced center. Those two bolts came out not too easy but put them back weren't easy at all. I have to use muscles and do it very, very hard to get inside, now I have noise and same vibration. I replaced the transmission mount as well.
Maybe its a suspension component!?
@@asphalt_boxer Suspension component? NOOOOO, I have replaced: Front struts twice. lower arms control with new bolt joint. twice sway bark link and sway bar bushings. Rear shocks. Now I just ordered right mount and see what will happen. I will do a test with the car on and somebody pushing gas pedal in drive and in reverse after I put the right mount.
Happy I came to your page Omggggg I have a 2011 white Kia and got so many things fixed on it. This week. Got a new transmission July 2021 also I’m gonna go check the sound to see if it’s doing this now my water pump acting up and the car engine shaking a little once I stop a stop sign. And then pull off it starting shaking like a feeling of needing a wheel alignment
Glad my page helped, fortunately alot of the parts are really affordable and easy to repair
How those torque is different than other video I just saw front a 2010 Kia soul. you says: 14mm-100 ft lb of torque? the other video says: 40 ft.
--- you said: 17mm: 125-130ft, but the other video says: 80ft lb.
Not sure what video you watched, but my torq number came directly from the Kia owners manual and repair manuals. Please note in the 2010 there is an automatic transmission and manual transmission that have different mount locations and different mount sizes. Also there’s a 2.0 motor 1.6 motor.
@@asphalt_boxer I agree with you 100%. My is 2012 automatic 2.0L 4 cyl. yes, you are right, but your video says 2010-2013, so it means will be cover all those years.
@@HeydaCarreras correct, the method is the same however, the torque and bolt sizes may vary, for this video, it was done on a 2010 manual, 2.0.
How much time does it require to do that labor job ? My Kia has the same problem just saw that until now because the noise kept on so how much is it that a mechanic 👨🔧 charge to do this job I’m needing the job done but don’t want to pay as much to do the work
It took me about an hour to do this. So depending on where you are, it should not cost you more than 300 dollars. Hope this helps
@@asphalt_boxer thank you very much your video was so helpful
Was the car shuddering before install?
Not sure what you mean by Shuddering but if that means the car was hesitant or slow or out of power then no
450 job at kia. Wow. I make it look easy
e~bay has the best prices... e~bay = $70.00 for all three and free shipping
Thanks for sharing
Good video but the music sucks.
Good feed back