XTools needs to make a video that references re-use of prior screw colors and addresses the directionality of this build. For example, when assembling the left bar, this video shows the mounting of the motor but not the direction the connection faces. You don’t see that until the next “scene” at which point you have a 75% chance of having to tear it apart and reassemble with the connector facing down the rail. A good video would show the positioning first, then the installation. If this is a user-made video, then I thank you, friend, for trying to do something to make it easier. If this is an XTool video, it does not stand up well in the light of the absolute simplicity of your printed installation material for the non-extended XTools D1 Pro kit.
I just got my extension in the mail and you’ve got me scared to install it. I’m new to lasers and lightburn so I wanted to ask. Did y’all figure anything out? Even if it doesn’t display the new size, can you print “out of bounds” vertically?
@@dereksummers8598 no sadly the xtool will physically stop itself from moving past the original measurements. From what I've heard so people have gotten it to work with laser box but that's it.
Damn , how do they just have all of these issues in the comments and don’t have anyone responding ? Just like their customer service this so bad. They are putting tons of dollars into ad campaigns and getting people to review and missing the basic step of customer service. So sad I’m going to return everything and take my $700 loss just to not deal with them: it’s worth it to me they scammed me out of $200 for “ xtool care “ haven’t been able to get any response out of these people. Save your money and time if you haven’t purchased anything from them yet. Really wish I would have saw these comments before purchasing
So assembly is pretty basic, however I am not able to get Xtool Creative space to recognize the larger work area. What am I missing? Also my extension kit was someone else's return I do not have the 40watt laser wiring assembly is that something I need to buy separate?
@@richarddenny7089 wires were shipped separately took 30-45 additional days but they did finally show up. Not sure why they would develop a product and it no be complete but seem to be the way they operate.
Im having trouble routing the cables with the extension shroud on the unit. It simply doesn't work, the cables can't run outside the unit like you show here in this video. :(
make sure your extension kit is for the proper unit, D1 or D1 Pro. My wiring harness didn't fit the unit either. I found out when I ordered everything all at the same time the D1 Pro, the extension kit, the air assist, the RA2 Pro and everything else, somehow the order got mixed up and I got an extension kit for just a regular D1. At first I contacted them and I got an email back stating I had to disassemble the wiring harness to use the cable that had the small connectors on it. Well, I got to that point, the next problem was my connectors, the white connector, was not the right size it was the smaller one and that will tell you whether you got the right unit or not if you got the extension for the D1 it has an 8 wire, and I believe it's 17 mm plug and the proper one for the Pro is a nine wire, 23 mm plug on both ends. Its the one that goes from the unit itself to the laser unit. They just sent me the proper wiring harness and all the wires are longer and appear to be correct.
I ordered in July and I just got the (hopefully) correct wiring harness. I have missed many opportunities that I had bought the unit to burn things for.
It took me 5 hours to put together the Extension kit for the D1 Pro,had to go back about 30 times on this video till I was able to finish it Lol but in the end this video was the only one that shows everything you need to know about getting it all together.
The video is super easy to follow. PLEASE kill the music I can’t handle listening to that over and over and over… silence would be better than that awful stuff.
How to configure new size in lightburn? You had to know we would ask!
XTools needs to make a video that references re-use of prior screw colors and addresses the directionality of this build. For example, when assembling the left bar, this video shows the mounting of the motor but not the direction the connection faces. You don’t see that until the next “scene” at which point you have a 75% chance of having to tear it apart and reassemble with the connector facing down the rail. A good video would show the positioning first, then the installation. If this is a user-made video, then I thank you, friend, for trying to do something to make it easier. If this is an XTool video, it does not stand up well in the light of the absolute simplicity of your printed installation material for the non-extended XTools D1 Pro kit.
How do I install the 20 watt NON pro module in the extension kit?
How do I get lightburn to set the new boundaries.
I also don't know how to do this. Can't get the laser to go past the middle point. Tried everything.
@@mysmallshop2508 right! And xtool won't say anything about it!
I just got my extension in the mail and you’ve got me scared to install it. I’m new to lasers and lightburn so I wanted to ask. Did y’all figure anything out? Even if it doesn’t display the new size, can you print “out of bounds” vertically?
@@dereksummers8598 no sadly the xtool will physically stop itself from moving past the original measurements. From what I've heard so people have gotten it to work with laser box but that's it.
@@dereksummers8598 I've got it mostly figured out. Message me on here when you have it installed and I'll walk u through it
how can i extend the building place in the XTOOL software????
Damn , how do they just have all of these issues in the comments and don’t have anyone responding ? Just like their customer service this so bad. They are putting tons of dollars into ad campaigns and getting people to review and missing the basic step of customer service. So sad I’m going to return everything and take my $700 loss just to not deal with them: it’s worth it to me they scammed me out of $200 for “ xtool care “ haven’t been able to get any response out of these people. Save your money and time if you haven’t purchased anything from them yet. Really wish I would have saw these comments before purchasing
My XTool had so many stripped screws on the pre-assembled parts it was trash. I wish I hadn't waited 6 months to start building it. :(
So assembly is pretty basic, however I am not able to get Xtool Creative space to recognize the larger work area. What am I missing? Also my extension kit was someone else's return I do not have the 40watt laser wiring assembly is that something I need to buy separate?
@@richarddenny7089 wires were shipped separately took 30-45 additional days but they did finally show up. Not sure why they would develop a product and it no be complete but seem to be the way they operate.
Im having trouble routing the cables with the extension shroud on the unit.
It simply doesn't work, the cables can't run outside the unit like you show here in this video. :(
What is the length and width dimensions with the extension rails added to the D1 pro? I cannot find these specs listed anywhere.
430 x 936 mm
Parts of this video seem backwards AF. Left vs Right.
There is a walk through in stools website. I also posted up a link on the lightburn forum
Can you post the link.
where did you get the long wires ..my wires are not long enough
make sure your extension kit is for the proper unit, D1 or D1 Pro. My wiring harness didn't fit the unit either. I found out when I ordered everything all at the same time the D1 Pro, the extension kit, the air assist, the RA2 Pro and everything else, somehow the order got mixed up and I got an extension kit for just a regular D1. At first I contacted them and I got an email back stating I had to disassemble the wiring harness to use the cable that had the small connectors on it. Well, I got to that point, the next problem was my connectors, the white connector, was not the right size it was the smaller one and that will tell you whether you got the right unit or not if you got the extension for the D1 it has an 8 wire, and I believe it's 17 mm plug and the proper one for the Pro is a nine wire, 23 mm plug on both ends. Its the one that goes from the unit itself to the laser unit.
They just sent me the proper wiring harness and all the wires are longer and appear to be correct.
I ordered in July and I just got the (hopefully) correct wiring harness. I have missed many opportunities that I had bought the unit to burn things for.
@@curtgroen2712 where did you order from?
I just ordered everything off of Amazon and I now have the wrong cords. My extension cord does not even have the yellow connection....
@@curtgroen2712 you ever got everything working correctly ?
It took me 5 hours to put together the Extension kit for the D1 Pro,had to go back about 30 times on this video till I was able to finish it Lol but in the end this video was the only one that shows everything you need to know about getting it all together.
A pretty video and we’ll edited but IMPOSIBLE to follow along. OMG. Please publish a PDF.
I added the extensions yesterday and I can not rehome! anyone out there with the same issue. I can frame and cut :(
Their customer service is lacking but they are trying to improve it.
It’s HORRIBLE
👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼🍎😎
구매하고 나서야 중국 제품인줄 알았지 진작에 알았으면 구매 안했을텐데
The video is super easy to follow.
PLEASE kill the music I can’t handle listening to that over and over and over… silence would be better than that awful stuff.
This video does not help do better
This video is awful! , way way to fast idk how any one can follow long !
I slowed it down to .25 speed and muted it.
Just slow it down... it's not that hard
Doesnt xtool operate in the US also?..why are they extra slow for everything...like damn fix your shyt