The Buzzwangle! Set Lambretta scooter ignition timing quickly and accurately with this new device!
Вставка
- Опубліковано 8 січ 2019
- The Buzzwangle! Set Lambretta scooter ignition timing quickly and accurately with this new device!
It's a new piece of equipment for those wanting accuracy when setting ignition or port timings on scooters, check it out in this video...
For more info: www.scooterfactory.co.uk - Розваги
just tried buzzwangle on ebay..... nothing there to help with timing ... but might put a smile on the old ladies face.....
Well explained too ....nice bit of kit it seems
good bit of kit, I use the Inclinometer from e bay (£9) and use my flywheel extractor to fit it on.
I just kitted my lambretta 185, I have 12vDC scootronics set up, I set it up a month ago, but will it need adjusting again... please help.. too scared to start it.
If you marked the stator prior to removal then possible not. However, as you have doubts then pay a professional garage to do it. If you're confident enough to kit the Scooter then read more and try your best.
The SIP timing tool at only £22 is a lot cheaper and does the same job. Ok you may have to remove the flywheel nut but to save £70 - that’s a bargain! For the TDC finder I use an old spark plug with the ceramic removed and replaced with a long screw that is araldited in place and cost nothing other than the one time half hour it takes to make one. Bargain!