Saeco Odea/Talea - replacing steam valve gaskets and flow meter problem explanation
Вставка
- Опубліковано 30 вер 2024
- This video shows what are the problems coming from steam valve and flow meter of Saeco Odea and Saeco Talea. The machine in the video is Saeco Odea, but inside it is similar with Saeco Talea. Also you will see how to replace the gaskets on steam valve. You can find spare parts in my eBay shop:
stores.ebay.com...
or with eBay user ID: miro1976 - Навчання та стиль
Hi, Anthony Miller!
I sell this part on eBay and you can find it like follow this link:
www.ebay.com/itm/Saeco-parts-Steam-Valve-Kit-for-Odea-Talea-and-Gaggia-Platinum-Models-/400925278813?ssPageName=STRK:MESE:IT
Also you can find my eBay store here: stores.ebay.com/miro1976
If you have any other questions, please feel free to cantact with me. I will be glad to answer and help.
Best regards,
Miro
Hi Miroslav, thank you very much for all your Saeco related videos - I found them really really helpful (and money saving as well :) ) I am struggling with water dripping from steam wand during coffee brewing (even in standby mode) on my Odea machine. So far I've descaled machine 3 times, changed all O-rings in the steam valve, brew unit and related parts, checked flowmeter, even changed the shaft/needle which is inside steam valve from another machine BUT still no luck. The only thing that prevents dripping water from wand is to release some steam (water) before brewing coffee..What do you think I should look at?
March 23/24: thanks for the video! Unfortunately after changing out the o-rings, the steamer still leaks like before. I even went back and removed the valve again and added a little seaco grease to them to help ensure they seated properly. No leaks from the pump inside…. the machine just leaks from the steam wand when under pressure. Any suggestions on where else to look??
Hi Miroslav,
Thank you for great videos!
I have Saeco XSmall machine.
It stopped functioning properly as no water is coming out of flow selector faucet and going into the brew unit. Pump is working, boiler also heating up. Water is definitely being taken from the water tank and going through the system, but no water is dispensed through flow selector faucet and all water goes to coffee grounds container.
What can be the issue?
Thank you
I replaced the O-rings but the steam wand is still leaking both from the steam valve housing in the machine and from the steam wand. Should I replace the whole valve assembly, or just the plastic parts?
Thank You for your videos, use them all the time! This last time i did something wrong, changed gaskets in brew module and steam valve, and machine does not brew, coffee waste comes out dry and hot water runs from the bottom of the machine instead of coffee dsipensing tube. Do you have a suggestion on whay may be wrong? Thank You!
Really good production quality of videos. Good pace, careful and extensive info and really good camera & lighting work. Your videos are some of the best and most useful I have seen. Thanks. Subscribed.
My Seaco Odea Giro streams water from the steam wand when it is dispensing coffee. It also drips for a bit after making coffee. Will replacing the entire steam valve likely fix this? Also, in the video, the last orange hose remained attached to the steam valve - how would I remove that hose? Thank you for your help! Christi
Здравей къде мога да намеря този клапан? От къде да го купя?
Awesome video! I have a leak when I brew a coffee and the leak is more towards the right side and the back side of the machine. It still dispenses the coffee fine. Any ideas what it could be? Maybe the plastic hose from the flow meter to the brew group? Thanks for the help.
Hi Miroslav, if the machine keeps pumping water, could this be due to a faulty flowmeter/sensor ? How do I replace the flowmeter ? Any tips ? Thanks! All your video's have helped me to keep my 12 year old machine going !!
Miroslav, your videos are so clear and well explained. Your experience is so valuable. Thank you for your help. Subscribed.
Здравей. Дали имаш български сайт от който може да се закупят резервни части за Saeco Talea Touch Plus . Имам теч от клапата за парата . Не затваря добре и капе от мястото за пара след самопочистване.
hi, do you have knowledge of Saeco Moltio HD8769 as well?
Mine is not leaking but it will not brew coffee. I can get water out of the water spot but it will not brew. When I press the brew button it goes through the process but then no coffee comes out. it just makes a humming noise. The grounds dump but they are really wet. The o ring around the coffee press had a chunk missing out of it. It is almost like something is clogged but i cleaned everything. Can you help with this?
Do you have one on how to open it Talea Touch
THANK YOU, SIR! You're keeping my Giro out of the landfill with you helpful videos. Steamer leaks after 10yrs. I'll be fixing it with your help. Thank you.
Zdraveite... My Saeco is flushing / rincing and descaling normaly but is i i try to brew some coffee, there's no coffee comming out.. Steel filter (Mesh) from de brewing unit has been already cleaned but to no avail... Any clue ?
Tahnk you!!!!!!!! You are a Genius! Thank you very much for sharing your knowledge.... Jorge from Argentina
Steam is not as strong as used to be, and sprays water for 15 seconds. Would you know if this could be fixed?
BTW. I like your videos, very informative. Thanks a lot!!
Hi Miro,
I have leak just above the water tank of my Odea Go machine. What do you suggest I do? Should I replace the steam valve gaskets or is there anything else i should check before ordering these?
I would appreciate your help
Thanks
My steamer works 1 out 100 tries, i have to turn the knob back and forth until it finally starts to run. This is a problem when trying to steam milk but is a major headache when trying to descale the machine. any suggestions?
Hi great video . do you know how many pulses the flow-meter should give to avoid the venting cycle ?
Здравей, последната част с датчика много ми помогна. Чудесни видеа правиш! Благодаря.
Great Video! Where do you purchase your parts? All places I have searched are not reasonably priced and typically don't have the full selection. My model currently has a plastic steam valve that is leaking out of the top. My first thought was to replace the gaskets until you mentioned replacing with a metal one to prevent future leaks.
Do you know where those little o rings can be purchased?
Thanks for sharing this tutorial. Without it I would have thrown everything away.
Good evening ,
i have almost the same problem with my saeco incanto de luxe , everything is ok and the only problem it's that there is no steam , it is the same to repair also for the incanto de luxe ? and do you sale the rings of the steam valve of incanto de luxe digital .
My steam arm has come loose, and I need to seat it back in the side panel. There is a white plastic washer y
That matches the hole in the body, but I can't get the arm secure. Any help appreciated.
Thank you, It helped a lot. Now my cofee maker is alive again.
Great videos, gave me enough information to tear down my machine, clean it and replace the pump.
Thanks for the video, helped me a lot !
Never mind, just found the other video!!! Thanks again.
Thank you for this video. Very helpful.
Thank you! :)
bravissimo.grazie
Thank you . This will help me a lot
Thank you:)
Your videos are amazing....
After several years of good working, my lovely coffee machine has leaks and coffee grinder problems... Thanks to your great tutorials, I completely disassembled it, found the problems, and I'm confident to repair them by myself. I hope I'll have great coffee for years and years again.
you all prolly dont care at all but does any of you know of a way to get back into an instagram account??
I was stupid lost my login password. I would appreciate any tips you can offer me.
@Jackson Louie Instablaster :)
@Brendan Reuben Thanks for your reply. I found the site through google and im in the hacking process atm.
Looks like it's gonna take a while so I will reply here later when my account password hopefully is recovered.
@Brendan Reuben it did the trick and I actually got access to my account again. Im so happy!
Thank you so much, you really help me out!
@Jackson Louie no problem :)