Hi Bro, Thanks and very interesting. If we connect a 9 V, AC supply to the two ends of the hand wounded primary coil ( neglect the middle taping), what would happen ?
Interesting question, so far 9v hasnt worked, and you CANNOT ngelect the middle tap, if you made one with no middletap, use some sandpaper and sand down the copper, then solder a middletap onto it.
You all probably dont give a damn but does someone know of a way to log back into an Instagram account? I was dumb forgot the login password. I would appreciate any tricks you can offer me
@Samson Andre thanks for your reply. I got to the site thru google and I'm trying it out atm. I see it takes a while so I will reply here later with my results.
Can you make schema and what voltage you used...etc? Little more details wouldn't hurt. I just took apart an old TV and mine is SANYO, G4G6L0000003, JEAG. That is what I see on mine. The input is a red and white wire and output is a larger diameter red wire, that clamps onto CRT. How many volts is run into the input? (I see someone was than probing the bottom connectors, one of them gave a spark, so that is how he did it - but did not provide how many volts he used as input voltage. Also, is it DC or AC voltage that is used on the input side? ) Mine look identical to yours, including the two knobs on the side to adjust some parameters - do you need to play with them - if yes - how do you adjust it? Lastly, does the direction of the coil you created on the side using magnetic wire is clockwise or counterclockwise? I do have several 12KV neon transformers and I also made Jacobs Ladder using Microwave Oven Transformer, so I know how to be safe around high voltage. Thanks again in an advance, any help is welcome from you or anyone else.
Can i help you? The turns and the way are just in the video, start to count from the second up and down, first one is just to set the wire to be roled . So its down to up, then goes to middle. Just follow his movements
Input voltage is 12 v battery I saw alot of videos and they use different kind of inputs....so could be battery between 12 to 36 and others 12 to 36 volts kind of energy
The best transistor you can use will be the one that was in tv Take a look if you still keep it. Generally its the biggest one close to the flyback. See the name of the component and search for datasheet in the internet and follow the description Thats it I hope that whit this infos i could help you or someone else :D
Thank bro 100percent finally work
Hi frend thanks it's a important help
I like this actually got current and I keep seeing you handle with out gloves
Wow good job 🙂👍
Bro it works without resistance also till the battery doesn't ends
Thank you for this information but i use2012mosfet and 10k resestor and it works
Hi Bro, Thanks and very interesting. If we connect a 9 V, AC supply to the two ends of the hand wounded primary coil ( neglect the middle taping), what would happen ?
Interesting question, so far 9v hasnt worked, and you CANNOT ngelect the middle tap, if you made one with no middletap, use some sandpaper and sand down the copper, then solder a middletap onto it.
You all probably dont give a damn but does someone know of a way to log back into an Instagram account?
I was dumb forgot the login password. I would appreciate any tricks you can offer me
@Lennox Derek Instablaster =)
@Samson Andre thanks for your reply. I got to the site thru google and I'm trying it out atm.
I see it takes a while so I will reply here later with my results.
@Samson Andre it worked and I now got access to my account again. Im so happy:D
Thanks so much, you really help me out!
For what purpose we can use it?
Can you make schema and what voltage you used...etc? Little more details wouldn't hurt. I just took apart an old TV and mine is SANYO, G4G6L0000003, JEAG. That is what I see on mine. The input is a red and white wire and output is a larger diameter red wire, that clamps onto CRT. How many volts is run into the input? (I see someone was than probing the bottom connectors, one of them gave a spark, so that is how he did it - but did not provide how many volts he used as input voltage. Also, is it DC or AC voltage that is used on the input side? ) Mine look identical to yours, including the two knobs on the side to adjust some parameters - do you need to play with them - if yes - how do you adjust it? Lastly, does the direction of the coil you created on the side using magnetic wire is clockwise or counterclockwise? I do have several 12KV neon transformers and I also made Jacobs Ladder using Microwave Oven Transformer, so I know how to be safe around high voltage. Thanks again in an advance, any help is welcome from you or anyone else.
Can i help you?
The turns and the way are just in the video, start to count from the second up and down, first one is just to set the wire to be roled . So its down to up, then goes to middle. Just follow his movements
Input voltage is 12 v battery
I saw alot of videos and they use different kind of inputs....so could be battery between 12 to 36 and others 12 to 36 volts kind of energy
The nobs are for adjust the screen
They are for the other two wires, not for the big red one. So they didn't need to be twisted
The best transistor you can use will be the one that was in tv
Take a look if you still keep it. Generally its the biggest one close to the flyback. See the name of the component and search for datasheet in the internet and follow the description
Thats it
I hope that whit this infos i could help you or someone else
:D
@@paulojesus8573 Thank you very much!
Bro my arcs are very small 0.1 mm .what will I do?
More turns
And more voltage
How can i increase the plsma distance
thanks for your interesting video.. if power supply is 12VDC, how much is being outputted by the flyback transformer?
200-250v
@@deeznuts5421 ءثف
Utk flyback monitor komputer bisa kah?thanks
نعم@@ibrahimaries9444
Quisiera saber para que sirve los dos cables que salen del flaibas
The cables are for screen adjustment
That's why in the fly back have knobs
But in this one you will not use them
@@paulojesus8573 por que lo escribes en inglés si tu nombre dice que eres latino
can i attach a second coil to produce electromagnetique field
Can this be used as fish stunner?
NO
kindly provide complete diagram
How many time that i can leave this on?
Will use to make ozone
What?
You didn't understand me
How many ours i can get the flyback turned on?
It's to create ozone
Ozone kills covid19
Understand?
@@paulojesus8573 what a f**k is wrong with jesus
@@paulojesus8573 you mean hours?
Flyback monitor computer can make Mr,,,thanks
Top
Se puede hacer con un transistor distinto
Hola amigo cómo estás, as logrado que querías ?
Muy buenos
Apakah dapat menyalakan air conditioner 1pk,atau prizer es krim???
THIS IS DANGEROUS, LETHAL, HAZARDOUS don't play with EHT step up transformer ever, creates 20k to 25k volts
Can it stun fish?
So selfish, how many turnos for the coil,, great video but litle info.
Find in the UA-cam brother
How to turn on flyback
And why you are mad? You can count how many turns he did. It's just like the video ;)
15 each coil
Do a middle tap after 15 wraps, you can sand the middle down later.
how many turn ???
You can caunt the turn
Its just the way he make them
15 each coil
Yet another among thousands of tutorials with NO VOICE, JUST STUPID MUSIC. WHY?
Wow 😂