actually i'd be on board with this. already have 2 mega size models and would love that specially if they also tossed in that barbatos lupas sword too.
Wait till they finish the whole thing and then review it so you have an excuse to compare the sizes to all the other Unicorn model kits. I know articulation won't be great but it's all about that transformation (:
@Zhen Neil If you want it to light up, you can either get this Mega Size and customize it with LEDs or just buy the Perfect Grade and the LED unit that Bandai has released. ^_^
You'll be better off modding your own lights into it. Its large hollow parts makes it easy to route wires and such through to the psycoframe parts. And the psycoframe parts themselves being hollow means that light will bounce through them with no problem whatsoever. The PG's LED add-on is nice, but the design of the kit is such that some areas of psycoframe get less light than others; there are noticeable dark spots in the psycoframe. With the MSM, I can almost guarantee that a half-decent LED job will light up the entire thing more evenly.
Love the unlimited possibilities of customization you can do with this kit. Not exactly HG on steroids because there's a lot more detail like panel linings on it than the PG and RG version. It doesn't transform but it makes it up for an epic display that will catch everyone's attention.
I seriously HAVE to pick this up. I have the Mega Size RX-78-2 and I just adore it. I will say the one thing that put me off were the beam sabers (as you said) since the length is the same as a lot of PG sabers and even the ZZ Gundam Ver. Ka sabers. I would like some bigger ones, but they still look great! Also, I wish there was a separate pair of holding hands for the sabers, but the price for these kits is rock bottom considering the size, so I literally cannot complain. :>
@Renard Toh P-Bandai is a shorthand for *Premium Bandai*. What that entails is a product of online exclusive, limited edition kits. They are released in limited numbers and are rarely, re-released. They are only sold in countries that have a Premium Bandai (or called Club-G) online store. So you either buy directly through those sites if you live in those countries, or you pay more money by purchasing them through a third party like a website that sells those limited kits. If you buy through a third party, website or on places like eBay, you should expect to pay more money since those third party sites pay extra to get the kits as is.
Wait, 7,000 yen!? For a badass figure that size, I think it's a BARGAIN! At least if you compare it to statues/poseable figures of sexy anime girls of a similar price or even higher price. Since I really love the RX-0 and Gundam Unicorn (as in the show) especially the soundtrack, and since this is at 7,000 yen I can somehow afford, it's easy to build (I'll definitely suck at assembling because I have zero Gunpla experience), and I LOVE making things I love stand out at home, I think this is calling me. Looking for a place to actually put it on is the problem though. P.S. Oh my, it's the Vist Foundation logo!
@kenneth acuna Mega Size, GunPla kits are basically High Grade kits that are super scaled up to 1/48 scale. Perfect Grade kits are 1/60 in scale (smaller than Mega Size) but they are far superior in terms of details, gimmicks, number of parts, design, etc. IMO, if you want to get an RX-0 Unicorn Gundam in GunPla form at this time, I'd probably go with the Real Grade and Perfect Grade. I don't have them personally, but I've seen and read many reviews of the RX-0 Unicorn Gundam in all of its scales/grades out. The Master Grade releases of the RX-0 Unicorn Gundam is pretty good but it does have its problems. The recently released, Real Grade is amazing overall from what I hear but the shoulder joint is very stiff so you have to be careful. Again, this is all from reviews/overviews that I've read online and video reviews/overviews I've seen.
I have the HG, MG, the PG and the RG, and I'd say you're pretty much right. The PG is far and away the best version, but it's very pricey, of course, especially if you want the LEDs (and you do want them.) The RG isn't quite as good, but it's close (I think the proportions are a bit off, and there's the issue with the shoulder joints you mentioned), and given how much cheaper than the PG it is, if money's an issue, the RG's an excellent choice too. But if you can afford it, PG all the way. The MG, sadly, while very nice looking, is flimsy af. I like it, but it's basically the worst version. I actually prefer the HG.
kenneth acuna personally, size is the selling point. perfect grades are essentially bricks that you won't play with, so it really doesn't matter how much details go into articulation or frame. This thing is essentially a brick too but at least you can manhandle it all you want, as well the size makes it viable to make your own customization and LED
I already got the PG Unicorn for my birthday and it was my first PG Gunpla and my favorite. Seeing this Mega Size, I am considering want this as my first Mega Size Gunpla.
Did you know that the reason this big boy has you put the silver sticker inside the head is because the head itself can use ANY standard LED unit? It's why they give you both eye sticker types and why the head is so conveniently hollow. Built this at a bar I hang out at and had people coming up left and right checking it out.
there's an LED slot in the head behind the eyes. I don't understand how you didn't notice it. the reflective foil sticker eyes look like shit by comparison.
@duoduo You could always check US based stores and sites. Amazon has this for $115.99 + free shipping (for Prime members). USA Gundam has this for $89.99 + shipping. ... Florida Big Bad Toy Store has this for $109.99 + shipping. ... California Tatsu Hobby has it for $99.85 + shipping. ... California Image Anime has it for $110.00 + shipping. ... New York
you're lucky your in the u.s. you know how much more expensive it is in canada? i would have saved a thousand dollars right now since i started building last year...
@crankyboiy I suppose there are some benefits to living in the US, but Canada has things like universal health care that is so much better than the mess we have. Just be smart about where you buy your GunPla and when. I'm sure if you import kits from like HLJ, you can save a ton of money since they always price their kits lower than retail. Even with the expensive EMS shipping you should be able to save a lot of money since the actual price of the items are significantly cheaper.
@crankyboiy Oh and try not to get overambitious when buying GunPla. Don't overbuy. Really think about what series you're mostly into, and then decide if you want to collect HGs, RGs, MGs, etc. IMO, Mega Size is cool, but not really worth the money. If I wanted a big size kit, I'd go for a PG. But the cost efficient way if you're on a budget is to buy HGs only.
Makes me think if BanDai made the Attack on Titan kits.. Colossus Titan... HG = That size MG = 2x that size PG = 4x that size MS model = oh damn.. Bigger than my house!!?
the next Build Fighters installment should have a hilarious battle between the HG Neo Zeong & the Mega Size Unicorn, a battle of epic proportions that is both out of scale & at the same time almost equal in size!!.
Personally i'm not sure if i'm the only one, but i kind of would love a mega size Geara Doga to be made one day. though a mega sized. built me one of these mega unicorn gundams not to long ago. and i agree by far the easiest build ive had since my first SD gundams i got when i first started to building gunplas.
Ok, two questions/requests:1: if you have it can we see this next to the neo-Zeong (full frontals mobile armor)2: if you have one, try and put this (and he'll, why not all of the unicorns at once) under a black light Those are the only questions I have left after this review. Still kit looks awesome, and if I wasn't crushed for space, I might get one
Hey, thanks for the video ! I'm actually building mine, but the knees are completely loose and I don't see anything missing... Do you have the same issue ? It's hard to make him not fall back :(
I just finished building mine as well. I have the same knee issue in the right leg, its very loose but for some reason the left leg is all normal and tight.
I really don't see the point in these since you are losing all the engeneering of the gunpla. The plastics parts look like cheap plastic toys, with very little details. And let's not even talk about articulations. At least these mega size aren't expensive. You can't have a larger scale without showing/introducing more details. Maybe this gunpla is cool to paint.
Thanks for your answer. I think as well, but I'm more a casual builder than a good painter. So I have a hard time imagining how to make this kit look good. But I have no doubt it could be amazing :) .
Mega size
Basically a high grade that took too much growth pills
not even high grade. modern high grades have much better articulation.
@@killer13324 yeah such as barbatos and other IBO gundams
@@user-ul7cw8ww1d nah dude do you have the hg unicorn?
@@haleyleyley8951 yes I do. Both banshee norn and Unicorn.
@@danl5351 lol tall grade for the win
Now they need to make a Barbatos Lupus Rex at that size and that CAN hold its mace in one hand!
The mace will be bigger than most infants and i'm not quite okay with that
@Life Of A weeb same here. Mine had no problems
actually i'd be on board with this. already have 2 mega size models and would love that specially if they also tossed in that barbatos lupas sword too.
You're honestly asking for too much when it comes to the maze
Mega size lupus should be enough if not the 3rd form
"a pair of beam sabers, big enough to be used as chopsticks" 😂😂😂😂😂😂😂
The beam saber is the same as the one used by 1/60 PG scale gundam.
My favorite quote
3:50
Now we just need you to have it stand next to the 1/1 scale they are building currently (:
+ChronoPinoyX I was standing next to it yesterday :)
+Mecha Gaikotsu do you record your trip? would like to see the vlog of it!
Wait till they finish the whole thing and then review it so you have an excuse to compare the sizes to all the other Unicorn model kits. I know articulation won't be great but it's all about that transformation (:
ChronoPinoyX meron kabang gunpla?
MEGA SIZE UNICORN FULL ARMOR NEXT!!!
Psycho Zaku pls lewl
A UN 😑
P-bandai sold seperately, coming 2018.. lol
Mega sized deep striker
How about mega size neo zeon
Imagine that Bandai release a mega size Neo Zeong. You'll need a whole room to display that.
I wish the RG Unicorn will come in a 1/48 scale.
*up next mega size psycho gundam*
Lol kinda impossible. Psyco Gundam is huge even in HG 1/144 that Bandai has made.
How about mega size neo zeon
Im scared of how big it would be
Well shit, that's going to be super massive
That can transform
I hope this model got a light unit, hopefully can make my bedroom lamp.....hahaha.....
@Zhen Neil
If you want it to light up, you can either get this Mega Size and customize it with LEDs or just buy the Perfect Grade and the LED unit that Bandai has released. ^_^
You'll be better off modding your own lights into it. Its large hollow parts makes it easy to route wires and such through to the psycoframe parts. And the psycoframe parts themselves being hollow means that light will bounce through them with no problem whatsoever.
The PG's LED add-on is nice, but the design of the kit is such that some areas of psycoframe get less light than others; there are noticeable dark spots in the psycoframe. With the MSM, I can almost guarantee that a half-decent LED job will light up the entire thing more evenly.
xxnike629xx fatass
We need a Mega-size real grade. Imagine all the details you could fit in.
there'd probably be no use for panel lining the kit bc every single panel is a piece.
that wpuld be so fucking expensive lol
The box would be the size of a small home
They should make a new grade called GG -Great Grade and add perfect grade detail to the 1:48 mega size gundams.
So the mega size Unicorn Gundam is a BB... G?
Bat Man omg bbg
Best coment
missile?
For when you want to recreate a Gurren Lagann episode with gundams
4:19 - did you have a stroke for a second there lmao
the audio got a bit wonky for a split second
SHINGEKI NO UNICORN!!!!
Love the unlimited possibilities of customization you can do with this kit. Not exactly HG on steroids because there's a lot more detail like panel linings on it than the PG and RG version. It doesn't transform but it makes it up for an epic display that will catch everyone's attention.
I seriously HAVE to pick this up. I have the Mega Size RX-78-2 and I just adore it. I will say the one thing that put me off were the beam sabers (as you said) since the length is the same as a lot of PG sabers and even the ZZ Gundam Ver. Ka sabers. I would like some bigger ones, but they still look great! Also, I wish there was a separate pair of holding hands for the sabers, but the price for these kits is rock bottom considering the size, so I literally cannot complain. :>
I think this would be perfect if it had the transformation like the real grade.
and now... unleash P-Bandai Demons
De Raf what is P-bandai?
Renard Toh premium bandai kits
@Renard Toh
P-Bandai is a shorthand for *Premium Bandai*.
What that entails is a product of online exclusive, limited edition kits.
They are released in limited numbers and are rarely, re-released.
They are only sold in countries that have a Premium Bandai (or called Club-G) online store.
So you either buy directly through those sites if you live in those countries, or you pay more money by purchasing them through a third party like a website that sells those limited kits.
If you buy through a third party, website or on places like eBay, you should expect to pay more money since those third party sites pay extra to get the kits as is.
xxnike629xx stfu suiton u fatass troll.
Hmm, the degree of the splits reminds me of the splits Champion...do you remember the splits champion
Cough Cough a Gundam 00 Mobile Suit
Wait, 7,000 yen!? For a badass figure that size, I think it's a BARGAIN! At least if you compare it to statues/poseable figures of sexy anime girls of a similar price or even higher price.
Since I really love the RX-0 and Gundam Unicorn (as in the show) especially the soundtrack, and since this is at 7,000 yen I can somehow afford, it's easy to build (I'll definitely suck at assembling because I have zero Gunpla experience), and I LOVE making things I love stand out at home, I think this is calling me. Looking for a place to actually put it on is the problem though.
P.S. Oh my, it's the Vist Foundation logo!
And?... Did you bought it?...
Mega unicorn gundam phenex?
so PGs are better than Mega Size if you don't just want size?
pg and rg is the most realistic build
mega size is just a gigantic hg
@kenneth acuna
Mega Size, GunPla kits are basically High Grade kits that are super scaled up to 1/48 scale.
Perfect Grade kits are 1/60 in scale (smaller than Mega Size) but they are far superior in terms of details, gimmicks, number of parts, design, etc.
IMO, if you want to get an RX-0 Unicorn Gundam in GunPla form at this time, I'd probably go with the Real Grade and Perfect Grade.
I don't have them personally, but I've seen and read many reviews of the RX-0 Unicorn Gundam in all of its scales/grades out.
The Master Grade releases of the RX-0 Unicorn Gundam is pretty good but it does have its problems.
The recently released, Real Grade is amazing overall from what I hear but the shoulder joint is very stiff so you have to be careful.
Again, this is all from reviews/overviews that I've read online and video reviews/overviews I've seen.
I have the HG, MG, the PG and the RG, and I'd say you're pretty much right. The PG is far and away the best version, but it's very pricey, of course, especially if you want the LEDs (and you do want them.) The RG isn't quite as good, but it's close (I think the proportions are a bit off, and there's the issue with the shoulder joints you mentioned), and given how much cheaper than the PG it is, if money's an issue, the RG's an excellent choice too. But if you can afford it, PG all the way.
The MG, sadly, while very nice looking, is flimsy af. I like it, but it's basically the worst version. I actually prefer the HG.
kenneth acuna personally, size is the selling point. perfect grades are essentially bricks that you won't play with, so it really doesn't matter how much details go into articulation or frame. This thing is essentially a brick too but at least you can manhandle it all you want, as well the size makes it viable to make your own customization and LED
xxnike629xx boo suiton. ur not an expert, ur a dumb head.
Led kit for this ?
Hopefully
It's been a month since Magami Device speed build:[...
I totally forgot about that!!!
I hope this does not become like the missing part 2 of the FA Gundam review *sobs*
I already got the PG Unicorn for my birthday and it was my first PG Gunpla and my favorite. Seeing this Mega Size, I am considering want this as my first Mega Size Gunpla.
PG unicorn: is smaller than another model
Everyone: now this is an avengers level threat
Huh?
Now all it need is an LED kit.
Can't wait to see the gold plated phenex version of this.
Cool, but it’s basically an oversized HG 😂😂
I need barbatos mega size
I bought this since last year easy build nothing special but worth building it.
Looks almost like a Medabot. I wonder if anyone will ever be crazy enough to make a lifesize Medabot kit 🤔
It will just be as tall as a human child, or a little taller.
Joeie Rivera I would kind of want it to be a perfect grade in quality, but then again I just want a Medabot irl. A guy can dream
I'll be happy if there is even a model kit of Totalizer.
do you think you will review the formina sazabi
I cannot eff'n believe this thing comes with waterslides and the PG doesn't. WTF.
Did you know that the reason this big boy has you put the silver sticker inside the head is because the head itself can use ANY standard LED unit? It's why they give you both eye sticker types and why the head is so conveniently hollow. Built this at a bar I hang out at and had people coming up left and right checking it out.
Mecha Gaikotsu, have you considered entering ZakuAurelius' Unicorn contest?
6:28 I repeat it again Unicorn Amazing Shadow. Its huge!!
man i cant wait to get my hands on this kit. mine's coming this october but the review makes me want it now. lol
I finally got this thanks to my streight A's
there's an LED slot in the head behind the eyes. I don't understand how you didn't notice it. the reflective foil sticker eyes look like shit by comparison.
HG but bigger parts
I wish their is a HUMAN-SIZE Gundam!! 😂😂😅😅✌️✌
MusaiAnime - Dragneel there Is. it’s a 1/12 size
Hello new subscriber here just wanna ask where do you buy your Gundam kits online?
Mega-size don't have great articulation, huh?
Imagine if they put some led lights in there
Gonna be more awesome 👌
Damn, this piece of giant shit had a better split than that of the umm.. Unicorn hg
shipping cost to US is very high. Luck you living in Japan.
@duoduo
You could always check US based stores and sites.
Amazon has this for $115.99 + free shipping (for Prime members).
USA Gundam has this for $89.99 + shipping. ... Florida
Big Bad Toy Store has this for $109.99 + shipping. ... California
Tatsu Hobby has it for $99.85 + shipping. ... California
Image Anime has it for $110.00 + shipping. ... New York
Thanks. 7000 yen = $65 USD. So I pay about $50 USD more.
you're lucky your in the u.s. you know how much more expensive it is in canada? i would have saved a thousand dollars right now since i started building last year...
@crankyboiy
I suppose there are some benefits to living in the US, but Canada has things like universal health care that is so much better than the mess we have.
Just be smart about where you buy your GunPla and when. I'm sure if you import kits from like HLJ, you can save a ton of money since they always price their kits lower than retail.
Even with the expensive EMS shipping you should be able to save a lot of money since the actual price of the items are significantly cheaper.
@crankyboiy
Oh and try not to get overambitious when buying GunPla. Don't overbuy.
Really think about what series you're mostly into, and then decide if you want to collect HGs, RGs, MGs, etc.
IMO, Mega Size is cool, but not really worth the money. If I wanted a big size kit, I'd go for a PG. But the cost efficient way if you're on a budget is to buy HGs only.
Am I the only who notices the bunny girl in the frame at 6:08?
Makes me think if BanDai made the Attack on Titan kits.. Colossus Titan...
HG = That size
MG = 2x that size
PG = 4x that size
MS model = oh damn.. Bigger than my house!!?
Got this thing for Christmas it is huge like trump wall huge
What if earthquake strike again on japan... that gundam will fall from the shelf... it's a horror but true story.
It's com-PEARea-sion. And 7000 yen is like 680 USD?! I'm getting this for 80 USD!
Please help me, I really need info about the knee parts. Mine are both loose, what did I miss? Should there any pc parts there?
Only 7000 yen? It's like 14000 yen here in the US lol
Hold up... i thought this WAS the perfect grade... DAAAAAAYYYYYUUUUUMM
This is a giant hg so you like the hg gundam unicorn.
the next Build Fighters installment should have a hilarious battle between the HG Neo Zeong & the Mega Size Unicorn, a battle of epic proportions that is both out of scale & at the same time almost equal in size!!.
Gonna wait til the green frame comes out and run el wire through this.
Personally i'm not sure if i'm the only one, but i kind of would love a mega size Geara Doga to be made one day.
though a mega sized. built me one of these mega unicorn gundams not to long ago. and i agree by far the easiest build ive had since my first SD gundams i got when i first started to building gunplas.
I just know if I get this kit the full armor or the banshee will come out a week later.....might as well get it out of way now.
Instead of using sticker for eyes, you can actually use the LED for MG kits in the head
Ok, two questions/requests:1: if you have it can we see this next to the neo-Zeong (full frontals mobile armor)2: if you have one, try and put this (and he'll, why not all of the unicorns at once) under a black light
Those are the only questions I have left after this review. Still kit looks awesome, and if I wasn't crushed for space, I might get one
Anyone have issues with the arm part?
Watch as the banshee becomes p-bandai... I can already see them scheming now :.(
We NEED a banshee/norn(preferably with armed armors for both versions) in one kit as well as a fenex and fekensu
MegaSize Sinanju please.
Nice vid! Keep up the great work!
Anyone know the dimensions of the box?
According to HLJ:
Item Size/Weight: 58 x 39 x 14.3 cm / 2110g
@@MechaGaikotsu thx mecha, in visiting japan and i want to buy stuff at the gundam base so im trying to see if things will fit in my suitcases
HG articulation + splits
RG, MG and PG details and Súper Massive scale
Can i ask something what is the version of your MG Gundam Exia ?
I have the problem that the knees are look ?
which freedom gundam is that? is it the newer one from the Build Fighter series or ?
u left some pretty disgusting nubs on the backpack that u can see here 0:18
I'm planning to do my first top coat on an he full amor unicorn... do you put top coat on the clear parts
Can you paint with tamiya paint cans?
in the instructions it indicates that painting the plastic damages it. How true is it?
regards
So simply its just a HG but bigger
Next should be the Mega size Neo Zeong.
Hey, thanks for the video ! I'm actually building mine, but the knees are completely loose and I don't see anything missing... Do you have the same issue ? It's hard to make him not fall back :(
I just finished building mine as well. I have the same knee issue in the right leg, its very loose but for some reason the left leg is all normal and tight.
@@EpicBlargman on my side it's on both leg, I can't make a museum pose :(
1:48 is only $100, so we can let 1:1 to be around $5000? I'll take it!
Does it transformed into unicorn mode?
It would look better if the feet and backpack were white as well.
I am not gonna like a Full Armor of this....
God... Just imagine a Sinanju.
if i had that beast it would get wired up with led's
I wish they made the side part of the leg seperated instead of 1 big piece so it's an open hatch like the pg.
How many hours does it take?
7000 yen for this is ridiculous
Now if only we could get a mega size psycho gundam
Hey do you have a review about your mascot the skull gundam?
I really don't see the point in these since you are losing all the engeneering of the gunpla. The plastics parts look like cheap plastic toys, with very little details. And let's not even talk about articulations. At least these mega size aren't expensive.
You can't have a larger scale without showing/introducing more details. Maybe this gunpla is cool to paint.
+achaoPSG it's just shelf candy, and painted it would look astounding.
Thanks for your answer. I think as well, but I'm more a casual builder than a good painter. So I have a hard time imagining how to make this kit look good. But I have no doubt it could be amazing :) .
Yeah...I keep forgetting that this is thing. Looks mostly like an upscaled HG, down to the VFin. But thankfully, it has better hip joints.
this kit makes your hands look tiny
I need to know how to put the stickers
lol use the HG box as size comparison, so damn big
is that piccolo committing suicide?
The back of the head can fit the official Bandai LED light to light up the eyes.
Im actually shocked how different the size of the PG Strike & PG unicorn
Shinji get in the goddam unicorn
That will be the size of a mg psycho gundam !
I will never get it's a model kit too big than i can chew
even with dem nubmarks, it still is looking pretty dang cool!