For everyone asking what kind of H-Bridge this was and where did he get it, I found it. You can get them here: www.robotpower.com/catalog/ It's called a 'Simple H'
Hi, would you mind doing a wiring diagram on how you setup the wiper motor servo and what you used please, as me and my son are building a 1m RC buggy and need something like what you designed to do the steering. cheers kev
Did you ever find out which pins to use. I am putting one of these together right now. I would greatly appreciate your help. bob@sindyskinless.com Thank you!!!
Hi guys, great video. Just got one of those H-Bridges. What pins do you use for the RC input, as I can't see from the video resolution. Thank you. Regards John - South Africa
Did you ever find out which pins to use. I am putting one of these together right now. I would greatly appreciate your help. bob@sindyskinless.com Thank you!!!
Ii tried to do the same thing but I use Cytron MD10C motor driver. It has only three pin available that is PWM, DIR and GND. So those 2 wire from the original servo should connect to whuch pin? Tried all posibilities with those three pin but the motor only run in one direction.
+rotec Aerosport nice video. ive went and purchased the h bridge like yours, but what are your jumper pins set at? or can you define which wires you've got going where please.
Did you ever find out which pins to use. I am putting one of these together right now. I would greatly appreciate your help. bob@sindyskinless.com Thank you!!!
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
Great stuff mate! and awesome shop!
For everyone asking what kind of H-Bridge this was and where did he get it, I found it. You can get them here: www.robotpower.com/catalog/ It's called a 'Simple H'
Yeah, nice work. :)
So did anyone see the guy duck behind the shelve at 1:07?
For everyone asking what h-bridge was used check the link below
www.robotpower.com/products/simple-h_info.html
Fantastic.
Hi, would you mind doing a wiring diagram on how you setup the wiper motor servo and what you used please, as me and my son are building a 1m RC buggy and need something like what you designed to do the steering.
cheers kev
Did you ever find out which pins to use. I am putting one of these together right now. I would greatly appreciate your help. bob@sindyskinless.com Thank you!!!
Hi guys, great video. Just got one of those H-Bridges. What pins do you use for the RC input, as I can't see from the video resolution. Thank you. Regards John - South Africa
Did you ever find out which pins to use. I am putting one of these together right now. I would greatly appreciate your help. bob@sindyskinless.com Thank you!!!
Ii tried to do the same thing but I use Cytron MD10C motor driver. It has only three pin available that is PWM, DIR and GND. So those 2 wire from the original servo should connect to whuch pin? Tried all posibilities with those three pin but the motor only run in one direction.
+rotec Aerosport nice video. ive went and purchased the h bridge like yours, but what are your jumper pins set at? or can you define which wires you've got going where please.
Did you ever find out which pins to use. I am putting one of these together right now. I would greatly appreciate your help. bob@sindyskinless.com Thank you!!!
Hi can you tell me how to make this please thanks
Hi,nice work.Could you please tell me what type of H bridge you used and from were did you buy it?
thank you
www.robotpower.com/catalog/
Hey guys, for the bridge check out www.robotpower.com/products/simple-h_info.html as i am sure he is a busy man