I have a problem: I already setup everything as you recommended. However when I would like to react to some music videos and I would like to let everyone listen to the song with me at the same time. Can you show me how to do it? I tried multiple times but I dont know why I just could listen to the music video by headphones but everyone could not listen to what I was listening. How can I fix it?
You'll need to add the audio as a source inside of OBS. So you'll end up with two sources for audio, one input for your microphone and one for your desktop audio. This way the audio source of the music video can be mixed in to your Livestream.
For example, how can I capture the sound from my Samson microphone and a UA-cam video at the same time, while also being able to listen to the video in order to make reaction comments?
Any information on exactly how you setup your broadcast mixer to record output. say i wanted to stream with speakers but didn,t want feedback from the speakers in the mic
That'll be hard to do to balance audio levels so your microphone doesn't pick up your speakers, and you'll probably want to run quite a low gain on your mic. You could add some kind of noise gate as a filter on your microphone in OBS,, but as soon as you start talking, the audio from your speakers will inevitably be heard. Unless you watch, pause, speak. Watch, pause, speak etc.
I was following your instruction and everything worked except for screen flipping. I did make another scene and put video capture to sources. But it showed only a black screen....what am I doing wrong?
Is there a way to have the recorded screen capture and the recording of yourself separate files? I've seen where some content creators in post editing they are moving around the screen in a circle frame, sometimes a rectangle frame, and then sometimes the movie is behind them sometimes to the right of the screen?
Hey, Sorry for the slow reply this has been wracking my brain and I've been trying to find a solution for you. Could you please send me a link of an example so I know more of what you're talking about? There's an OBS plugin called Source Record, which allows you to record as many sources as your PC can handle. So if you want to record your content and webcam at the same time and produce two different files so you can edit it later, this is how you do it Download here: obsproject.com/forum/resources/source-record.1285/ Secondly, there are also animation plugins you can use which will animate the movement between different scenes. This Move Transitions plugin is pretty good. You can set up your custom animations before you start recording, and then hotkey those positions to your keyboard. So when you're filming a react video or gameplay video etc, you can record everything in real-time: Download here: obsproject.com/forum/resources/move.913/ I hope this helps, and thanks so much for checking out the content and for your comment.
For the webcam part I guess, is it possible to achieve this with a GoPro? Or I need a specific webcam that will plug into the same desktop/laptop that is running OBS? Hope that makes sense
Do you have a tutorial on how go get all this information as options?? Mine wont bring up anything at all without copy and pasting my URL for “display capture” and that doesnt look good at all, as well as how to add our own overlays as there are no options for that
@@TechNuovo yeah, but some creators posting these dont show they had to download all of their stuff, i guess i kinda figured some of the “templates” and things would already be there, think i just need someone to basically hold my hand and show me 😂😂😂 but part of it too, would be finding working memes and stuff to overlay in as well, is there a certain amount of overlays you can have?? Ive got A LOT of questions, thats why i subscribed lol
A quick question. I’m wanting to stream to YT and react to a video on YT live as it happens. I’ve seen another video where they did this in Streamyard. What is the difference between this method and Streamyard. Can I use this OBS method to pull up a YT video react to it and then broadcast this on my channel? Many thanks in advance for any assistance.
I have a question please. I notice on UA-cam videos sometimes when there are reactions videos. The person switches from reaction mode (small corner of camera + material) to full screen of camera only, back and forth. Example in your video, how to constantly change from 6:52 to 7:10
You can set up different scenes that cross between the two you need, and then you can assign hit keys to them so you can switch between them on the fly. However I am probably going to guess that some video editing is involved in these videos you're talking about.
Do have an advice for me? Want to do that, what you've shown on the Video, but in addional with a remote Partner. I know, I can realize that with virtual cam, but what about the Audio? If use something like virtual cable drivers my Partner hears hisself with a delay. How can I Do the setup that the remote Audio is on the streaming output, but not in the Monitoring? Thanks a lot
It will be possible. Firstly if you use something like Discord with your remote partner, you could potentially share your screen there, while capturing the window through Discord. In terms of audio you'd set your OBS up the same, with an audio input and audio output, and the same with Discord. In terms of video capture, use OBS to capture your webcam, and use OBS virtual camera to send it to discord if this is desired. Then aim OBS to capture your friend's webcam using a window capture source. You shouldn't need to use virtual cable for this.
I did a Window Capture of a video that I downloaded off of youtube, so the video plays on quicktime player. Then I did a window capture of the video on quicktime player but it turns out the audio from that video is not being captured in the recording. The video definitely has audio, but the audio from that video isn't being captured on OBS. Can you please advise me on this?
But when it comes to editing, is there no way to switch between scenes if you didn’t switch while filming? Like if I didn’t think of switching to the scene with me only, is there a way to edit it post recording
That's a very good question actually! Like can you record two scenes simultaneously. Two options: 1. A plugin called Source Record. obsproject.com/forum/resources/source-record.1285/ 2. Set your recording preview to 2x wider than your height (if usually recording 1920x1080 you'd set it to 3840x1080) from here you'd build your two scenes in one area and then crop in post. Hope this helps. Thanks for checking out the content.
How do you full screen youtube then get back to obs? I put youtube on full screen then I'm not able to get out and go back to obs unless I exit full screen. I'm using my laptop only.
As you're only on one screen, you'll have to either target the browser window, or alternatively Dona desktop capture. You won't be able to track OBS though if you did this.
Firstly, thank you for this instruction video. If I'm using headphones to listen to a UA-cam video that I am reacting to, how do I get OBS to record/stream the sound of the original video? Thank you
when i try to record i hear myself badly. with a delay. and the song is much much louder than mu mic which has full gain on. what to do??? audio quality of the main output is great. like an original audio from songs. but the mic.....
So I’m trying to do reaction videos I’m using my webcam on my MacBook Air m2 but I can’t get the split screen like you showed is it because I need a webcam?
Nope. The frame overlay was made in Photoshop. Though it you wanted curved windows, you could also Alpha Mask them which is a filter inside of OBS. We have a tutorial on this on the channel in our Tutorials Playlist 👍
How can I see myself and the UA-cam video at the same time if I'm having to pause and to add discussion? Example: Looking at UA-cam video I can't see my OBS screen. Is there a way to see OBS and the UA-cam video so I can make sure there isn't lag or any other issues while recording?
@@FunTimeFunnies yep that's possible. But you will need to use a browser window to pause UA-cam. So either two monitors so you can have OBS open on monitor 1, or one monitor and have the browser and OBS side by side.
Use a design software like.Photoshop or Canva, and you need to utilize the use of transparent areas on your design so the webcam and video can show through in OBS.
That's called a stinger which can be found in the bottom tiles. I manually created the block animation using Adobe After Effects and exporting as a transparent video file.
@@VoicesThePodcast Layering on Photoshop and using layer masks to hide the crossover points. The inside of OBS, your main scene will sit at the back as the lowest layer, and then your webcam layer will sit over the top of that.
Easy. Three things.. 1. Stick a pair of headphones on and set your windows audio settings to play through said headphones. 2. Use Audio Input Device in sources. Target your Samson microphone. 3. Use Audio Output Capture to target your desktop audio to capture the sound from the UA-cam video. Then use the OBS built in Audio Mixer to get your audio balance right if you're going to be talking over the video. Thank you.
I've looked at like 20 videos. I just wanna know how they bring the content they are reacting to, like a tv show, in and out, to avoid that 10 minute mark. I don't think they are all recording twice to add in the content in editing.
No, they would not be recording twice. In this instance they'd watch the TV show with a camera on them so they can react in real time. And then a separate feed for the TV show, either supplies by the producers or obtained by recording their screen. Then in post they'd edit it together using a video editing software to upload to UA-cam.
Very helpful, can you just help me,i went live to react and it records audio as well so when you listen my stream on twitch audio goes kinda into the loop. Do you know why is that and how can I fix it,thank you 😁😁
You cannot have your twitch stream audio on when streaming. There will be a delay between your OBS and how quickly Twitch gets your stream, which will lead to an echo. You have to either listen to your mix in OBS to get an idea of your audio levels, or look at the EQs provided.
Very good tutorial for noobs, however I do have a question. I want to have two 'hosts' on screen and a third video source to react to or comment on. The issue is the hosts are in two different locations. How can I pull the second host into the main screen (sort of like a Zoom video)?
When i use VLC video source, instead of window capture cos i want to react to a video already downloaded into my pc, i can't seem to hear the audio. Buh when i play directly from UA-cam via window capture, i hear the audio out. How can i solve this please?
Your audio input capture will need to target where your audio is being played from. Go to the bottom right of your desktop to your system tray, and click the little speaker. Whwtever that is, set your OBS audio input capture to that. This way your audio will play through OBS.
Im using OBS. Everythign is set up. When I pull up a video on netflix or crunchyroll for anime, I can hear and see the subtitles. However, the image doesnt pop up. can you help?
That's because Netflix and probably CrunchyRoll have built in piracy protection hence the black screen. Unfortunately doing something like that is illegal.
@@AJCoCoQueen to be honest I have no idea as I've never engaged in that kind of content creation. There may be another screen recorder software out there that can do it, or they're receiving clips from the PR firms of these shows for the purpose of making content.
I dont understand how i can go full screen on UA-cam and still use obs, as soon as i go full screen on UA-cam it hides obs and i am unable to see if i am capturing everything i want, is their a way to control the UA-cam window from the OBS siftware, sych as play, pause, rewind, full screen ect.
Not that I know of. Usually a second monitor is the way to go so you can have full screen UA-cam on monitor A and then OBS on monitor B. Another option is to resize your Window Capture window to the size of the video and resize the window.
Yep, unfortunately services like CrunchyRoll, Netflix etc will have an anti screen recording feature due to piracy. Best thing to do is download UA-cam clips and edit the video before publishing it.
@@sjrahrico you will still have to control the video on the UA-cam player for it to play through OBS. For sound, you will need to find where your sound source is coming from. If its your desktop audio then you will need to add an Audio Output to your sources.
In the video is he using OBS Studios or OBS streamlabs? The title doesn't specify which one he is using and I want to know because OBS studios is the one I want to use not streamlabs.
@@TechNuovo Okay sounds good that's the one I want to use to. I just wanted to make sure that was the one you were using in the video. Thanks for telling me!
This doesn't record the audio of the video you're playing by default. The one thing no one seems to address lol. Spent hours trying to get this working.
Have you got the source audio active on your Scenes? Bring in an Audio Input Device under your sources and direct that towards whatever audio you have set in your Windows settings (check this in your bottom right system tray).
When I transition to my 2nd scene (where my webcam is the full screen video) It disables my other webcam for the reaction part. Anybody know a fix to this?
How are you pulling your webcam into the scene? You could adding a separate webcam source, and then pulling that into each scene instead of a video device.
Thank you Sir I truly appreciate your tutorial the time you took. What I wanted to ask how can I do this without showing my face at all however I DO WANT THE SAME EFFECT WITH BOX AT THE BOTTOM WHERE YOU PLACED YOURSELF, I wanted to add a picture instead of mic motion effect. I'm going to try it in the meantime. Also another question lol please forgive. I have a revelator mic it's so sensitive it picks my neighbors. instead i have M58 i connect with my Zoom podtrak4 I so live it. How can i connect my zoom podtrak 4 with my obs and get that beautiful sound that i'm getting with Zp4 hope I made since thanks an advance @techNuovo
Okay 1. Audio effect. If you've got a transparent .mov file of the audio effect, you can add it to Obs as a transparent video. In. OBS you can ticj the "loop" button so it repeats I'm not sure if there's any kind of plugin that will automatically react to your voice though. might have to do some googling. 2. If the zoom connects to your PC/laptop via USB, you might be able to add it as an audio capture device, meaning you can use anything plugged into the Zoom as a microphone. I don't know this 100% as never tested myself, but it sounds like it could work.
That could be a little tricky, especially with resizing the full screen UA-cam video. Though you could watch the video in a window, and inside of OBS, use a window capture source and crop the window capture to the video area and resize it in OBS.
I made it on Photoshop and saved as a transparent PNG so I could bring it into OBS. There's a tutorial on the channel on our Tutorials Playlist on how to make your own.
You aren't alone. I have watched too many videos and still can't get past the first steps. I had to stop and look up the work Overlay. I wanted to do a reaction channel. I thought it would be fun for family time, but I am thinking I need a Gen X tech channel because this is going right over my head and passed my ears.
This isn't helpful. I don't know what you're doing a little after the six minute mark. You say webcam background one.. brilliant... What is that.. I don't see that? Mine doesn't look like that. You glossed over that way too quickly.
Hello. I've just watched from 5:00 to 6:42 and couldn't see where I said Webcam Background 1. If you're referring to where I said it at 1:07, when I'm adding it to my scenes, I made my background in Photoshop and added it as an image source and located the file on my hard drive. We have a separate tutorial as it was requested talking about OBS overlays which can be found here: ua-cam.com/video/bwW8DIWrkJo/v-deo.htmlsi=DaIy4CexewnFh808
@@TechNuovo Oh, I'm sorry it was at 1:13. Yeah you clicked through two or three different steps very fast. I couldn't even see what it was you done.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Want to learn how to make your own OBS overlays?
ua-cam.com/video/bwW8DIWrkJo/v-deo.htmlsi=rCIN2BlV52QfAUN2
how to make window capture full screen while recording ?
Leave a link for your custom overlay?
yeaaah damn
This video help me out so much. You have no idea! Appreciate you bro! Keep up the great work 💪🏾🫡
You're so welcome. And thanks for checking out the content!!
Where can I get This your overlay or boarder image please, can you share it for us here
I bet u if u out 2023 in your tittle u will get more views ..try it ..most these obs videos are super old
Thanks for the suggestion, we may just do that! 👍
It worked 😉🫶🏾😎🥃
Smart he did it and I made it here!!
@@squalleyyeah it actually did
same 🤣🙏🏿
Thanks for this video! Short, sweet, and to the point. Great overview of the process.
Glad it was helpful! Thanks for checking out the content.
I have a problem: I already setup everything as you recommended. However when I would like to react to some music videos and I would like to let everyone listen to the song with me at the same time. Can you show me how to do it? I tried multiple times but I dont know why I just could listen to the music video by headphones but everyone could not listen to what I was listening. How can I fix it?
You'll need to add the audio as a source inside of OBS. So you'll end up with two sources for audio, one input for your microphone and one for your desktop audio. This way the audio source of the music video can be mixed in to your Livestream.
For example, how can I capture the sound from my Samson microphone and a UA-cam video at the same time, while also being able to listen to the video in order to make reaction comments?
the webcam background have you the link or does that come with your cam ? or built in obs already ? thanks great video
Webcam background as in the border I used? I made it on Photoshop. I've got a tutorial on the channel on how to do this.
@@TechNuovo Yes and thanks, I will take a look
Any information on exactly how you setup your broadcast mixer to record output. say i wanted to stream with speakers but didn,t want feedback from the speakers in the mic
That'll be hard to do to balance audio levels so your microphone doesn't pick up your speakers, and you'll probably want to run quite a low gain on your mic.
You could add some kind of noise gate as a filter on your microphone in OBS,, but as soon as you start talking, the audio from your speakers will inevitably be heard. Unless you watch, pause, speak. Watch, pause, speak etc.
I was following your instruction and everything worked except for screen flipping. I did make another scene and put video capture to sources. But it showed only a black screen....what am I doing wrong?
Is there a way to have the recorded screen capture and the recording of yourself separate files? I've seen where some content creators in post editing they are moving around the screen in a circle frame, sometimes a rectangle frame, and then sometimes the movie is behind them sometimes to the right of the screen?
Hey,
Sorry for the slow reply this has been wracking my brain and I've been trying to find a solution for you. Could you please send me a link of an example so I know more of what you're talking about?
There's an OBS plugin called Source Record, which allows you to record as many sources as your PC can handle. So if you want to record your content and webcam at the same time and produce two different files so you can edit it later, this is how you do it
Download here: obsproject.com/forum/resources/source-record.1285/
Secondly, there are also animation plugins you can use which will animate the movement between different scenes. This Move Transitions plugin is pretty good. You can set up your custom animations before you start recording, and then hotkey those positions to your keyboard. So when you're filming a react video or gameplay video etc, you can record everything in real-time:
Download here: obsproject.com/forum/resources/move.913/
I hope this helps, and thanks so much for checking out the content and for your comment.
from where did you get your overlays?
We create them ourselves within Photoshop.
@@TechNuovo do u have a tutorial for it?
@@ChoyPH27 yep. Visit the playlist this video is in and you'll find a tutorial on how to create this style of overlay.
@@TechNuovo thank you so much
For the webcam part I guess, is it possible to achieve this with a GoPro? Or I need a specific webcam that will plug into the same desktop/laptop that is running OBS? Hope that makes sense
As long as the GoPro can be recognised as a video input device if you plug it into your pc then yeah for sure it can.
Do you have a tutorial on how go get all this information as options?? Mine wont bring up anything at all without copy and pasting my URL for “display capture” and that doesnt look good at all, as well as how to add our own overlays as there are no options for that
If you can't see any of these options are you definitely using OBS Studio?
@@TechNuovo yeah, but some creators posting these dont show they had to download all of their stuff, i guess i kinda figured some of the “templates” and things would already be there, think i just need someone to basically hold my hand and show me 😂😂😂 but part of it too, would be finding working memes and stuff to overlay in as well, is there a certain amount of overlays you can have?? Ive got A LOT of questions, thats why i subscribed lol
A quick question.
I’m wanting to stream to YT and react to a video on YT live as it happens.
I’ve seen another video where they did this in Streamyard. What is the difference between this method and Streamyard.
Can I use this OBS method to pull up a YT video react to it and then broadcast this on my channel?
Many thanks in advance for any assistance.
Yeah OBS is my preferred software for any kind of livestreaming. Reacting to UA-cam videos is entirely possible with OBS.
I have a question please. I notice on UA-cam videos sometimes when there are reactions videos. The person switches from reaction mode (small corner of camera + material) to full screen of camera only, back and forth. Example in your video, how to constantly change from 6:52 to 7:10
You can set up different scenes that cross between the two you need, and then you can assign hit keys to them so you can switch between them on the fly.
However I am probably going to guess that some video editing is involved in these videos you're talking about.
Do have an advice for me? Want to do that, what you've shown on the Video, but in addional with a remote Partner. I know, I can realize that with virtual cam, but what about the Audio? If use something like virtual cable drivers my Partner hears hisself with a delay. How can I Do the setup that the remote Audio is on the streaming output, but not in the Monitoring? Thanks a lot
It will be possible. Firstly if you use something like Discord with your remote partner, you could potentially share your screen there, while capturing the window through Discord. In terms of audio you'd set your OBS up the same, with an audio input and audio output, and the same with Discord.
In terms of video capture, use OBS to capture your webcam, and use OBS virtual camera to send it to discord if this is desired.
Then aim OBS to capture your friend's webcam using a window capture source. You shouldn't need to use virtual cable for this.
I did a Window Capture of a video that I downloaded off of youtube, so the video plays on quicktime player. Then I did a window capture of the video on quicktime player but it turns out the audio from that video is not being captured in the recording. The video definitely has audio, but the audio from that video isn't being captured on OBS. Can you please advise me on this?
Is QuickTime muted?
If not, depending on your audio input capture you may need to target your desktop audio.
But when it comes to editing, is there no way to switch between scenes if you didn’t switch while filming? Like if I didn’t think of switching to the scene with me only, is there a way to edit it post recording
That's a very good question actually! Like can you record two scenes simultaneously.
Two options:
1. A plugin called Source Record.
obsproject.com/forum/resources/source-record.1285/
2. Set your recording preview to 2x wider than your height (if usually recording 1920x1080 you'd set it to 3840x1080) from here you'd build your two scenes in one area and then crop in post.
Hope this helps. Thanks for checking out the content.
This may have been asked but is it better to have 2 monitors so I can go full screen?
Yes, it'll be easier to track your stream with two screens, but it's not essential to do full screen.
How do you full screen youtube then get back to obs? I put youtube on full screen then I'm not able to get out and go back to obs unless I exit full screen. I'm using my laptop only.
As you're only on one screen, you'll have to either target the browser window, or alternatively Dona desktop capture. You won't be able to track OBS though if you did this.
4.38 how do i use??? the video in the capture window
Could I have the link to that Overlay background?
4:27 when I click play nothing happens I have to go to the other google screen to play, pause or stop the UA-cam video I'm trying to react to.
Yes, you will need to still click play on UA-cam browser window. You can't click play from OBS I'm afraid.
Firstly, thank you for this instruction video. If I'm using headphones to listen to a UA-cam video that I am reacting to, how do I get OBS to record/stream the sound of the original video? Thank you
You'll need to use an audio input capture source and target where your audio is being captured from. This way your audio will be heard by your stream.
@@TechNuovo hmm, i guess it is not available for Mac... or it could be that I just don't understand 😕 thank you
when i try to record i hear myself badly. with a delay. and the song is much much louder than mu mic which has full gain on. what to do??? audio quality of the main output is great. like an original audio from songs. but the mic.....
How do I get the small box and big screen like you have?
Not sure what you mean by small box and big screen I'm afraid. Could you elaborate please?
So I’m trying to do reaction videos I’m using my webcam on my MacBook Air m2 but I can’t get the split screen like you showed is it because I need a webcam?
How do you get the rounded edges around your windows? Is that a obs plugin?
Nope. The frame overlay was made in Photoshop. Though it you wanted curved windows, you could also Alpha Mask them which is a filter inside of OBS. We have a tutorial on this on the channel in our Tutorials Playlist 👍
4.38. as i can use the video in the window capture because i do the whole thing but i can use the window capture video
what if i want it half and half on the video sizes?
How can I see myself and the UA-cam video at the same time if I'm having to pause and to add discussion? Example: Looking at UA-cam video I can't see my OBS screen. Is there a way to see OBS and the UA-cam video so I can make sure there isn't lag or any other issues while recording?
Two monitors. Unless you want to switch between windows every time you pause a video
@@TechNuovoIs it the same if using a phone and a laptop?
@@TechNuovoI basically want to overlay my phone cam over the UA-cam video and then still be able to pause the UA-cam video.
@@FunTimeFunnies yep that's possible. But you will need to use a browser window to pause UA-cam. So either two monitors so you can have OBS open on monitor 1, or one monitor and have the browser and OBS side by side.
Got the info I needed so cheers mate
You're welcome!!
1:15 how did you make that background? I can't figure it out lol Help please!
the same thing
Use a design software like.Photoshop or Canva, and you need to utilize the use of transparent areas on your design so the webcam and video can show through in OBS.
@@TechNuovo oh ok! yeah i've been wondering about this for quite some time haha! thank you for the clarification!!
@@RoyalRedQueen you're welcome!
After you start streaming or recording how do you press play and pause etc the Windows capture...?
If you capture your web browser, you can pause the video there. You only use OBS to capture the window and change its size.
I saw transition changing scene how did you do?
That's called a stinger which can be found in the bottom tiles. I manually created the block animation using Adobe After Effects and exporting as a transparent video file.
How did you put it into full view? Min 4:50
Make the video full screen on the window capture.
where did you get the webcam overlay picture ?
I made it.
@@TechNuovo curious though, if it's one flat image, how does the scene displayed on the larger frame not cover the smaller frame?
@@VoicesThePodcast Layering on Photoshop and using layer masks to hide the crossover points.
The inside of OBS, your main scene will sit at the back as the lowest layer, and then your webcam layer will sit over the top of that.
How did you add that image?
If you mean the background PNG then you can add it as an image source in the sources menu at the bottom.
This was very informative and I appreciate this, thank you!
You're very welcome.
How can I capture the audio of the UA-cam video through OBS while also listening to make a reaction to the video?
Easy. Three things..
1. Stick a pair of headphones on and set your windows audio settings to play through said headphones.
2. Use Audio Input Device in sources. Target your Samson microphone.
3. Use Audio Output Capture to target your desktop audio to capture the sound from the UA-cam video.
Then use the OBS built in Audio Mixer to get your audio balance right if you're going to be talking over the video.
Thank you.
Hi, for some reason I can’t install OBS Studio on my MacBook Air osMonteray. Any suggestions? Thank you sir
how do i get the webcam background in the first place?
It can be made on Canva or Photoshop or other image editing programs that allow for transparent PNG exports.
Thanks a ton! This is quick and effective.
You're welcome!
I've looked at like 20 videos. I just wanna know how they bring the content they are reacting to, like a tv show, in and out, to avoid that 10 minute mark. I don't think they are all recording twice to add in the content in editing.
No, they would not be recording twice. In this instance they'd watch the TV show with a camera on them so they can react in real time. And then a separate feed for the TV show, either supplies by the producers or obtained by recording their screen. Then in post they'd edit it together using a video editing software to upload to UA-cam.
can you share you image overlay?
Please lol 😩
Where did you get the overlay
I made it.
Can you use a tv for a monitor or?
Very helpful, can you just help me,i went live to react and it records audio as well so when you listen my stream on twitch audio goes kinda into the loop.
Do you know why is that and how can I fix it,thank you 😁😁
You cannot have your twitch stream audio on when streaming. There will be a delay between your OBS and how quickly Twitch gets your stream, which will lead to an echo. You have to either listen to your mix in OBS to get an idea of your audio levels, or look at the EQs provided.
@@TechNuovo i think I understand,thank you,I will try it,hope i am not too rookie for that hahah 😁
Very informative. Thanks!
Glad it was helpful! Thanks for watching.
Can send the custom overlay
So do I need another computer to full screen on UA-cam ?or is it just a cemra or monitor?im confused
No you can full screen on one monitor, you just won't be able to see yourself
@@footballtalk4857 yeah I been figured it out thanks tho
Very good tutorial for noobs, however I do have a question. I want to have two 'hosts' on screen and a third video source to react to or comment on. The issue is the hosts are in two different locations. How can I pull the second host into the main screen (sort of like a Zoom video)?
We have a tutorial for this sort of thing on the channel. It involves using Discord and screen sharing.
Try this
ua-cam.com/video/JlsCp2fkaWg/v-deo.htmlsi=H03HiaJifw9lNuaS
Thank You For Your Good work
My pleasure. Thank you for your kind words.
When i use VLC video source, instead of window capture cos i want to react to a video already downloaded into my pc, i can't seem to hear the audio. Buh when i play directly from UA-cam via window capture, i hear the audio out. How can i solve this please?
Your audio input capture will need to target where your audio is being played from. Go to the bottom right of your desktop to your system tray, and click the little speaker. Whwtever that is, set your OBS audio input capture to that. This way your audio will play through OBS.
Appreciate the help!
You're welcome! Thanks for checking out the content.
How do you get your overlay?
I made it in Photoshop. There's a video in the OBS Tutorial playlist on the channel that runs through how to do this.
@@TechNuovo okay, thank you! I’m gonna go watching it! Very informative video btw! 👏🏽
@@KeeYoung_ thanks for checking out the content!
@@TechNuovoI also subscribed 🤗
@@KeeYoung_ Legend! Thank you!
Where can I get this overlay?
We've got a tutorial on how to make it on the channel in our tutorial playlist.
W vid 🔥🔥🔥
Thank you! Glad you enjoyed it! 🙌 Thank you for checking out the content.
Where do you get the border? I'm unable to figure that out.
I made it myself in Photoshop.
@@TechNuovo Oh okay, THanks anyway
@@user-tm4my4jb6d what if we dont have photoshop. can you share yours for free?
Im using OBS. Everythign is set up. When I pull up a video on netflix or crunchyroll for anime, I can hear and see the subtitles. However, the image doesnt pop up. can you help?
That's because Netflix and probably CrunchyRoll have built in piracy protection hence the black screen. Unfortunately doing something like that is illegal.
@@TechNuovo so where are these other UA-cam reactors getting those episodes from?
@@AJCoCoQueen to be honest I have no idea as I've never engaged in that kind of content creation. There may be another screen recorder software out there that can do it, or they're receiving clips from the PR firms of these shows for the purpose of making content.
@@AJCoCoQueenGo to the website on your browser
How do i get that background?
Make it on Photoshop. I've got a tutorial on how to do it on the channel.
I dont understand how i can go full screen on UA-cam and still use obs, as soon as i go full screen on UA-cam it hides obs and i am unable to see if i am capturing everything i want, is their a way to control the UA-cam window from the OBS siftware, sych as play, pause, rewind, full screen ect.
Not that I know of. Usually a second monitor is the way to go so you can have full screen UA-cam on monitor A and then OBS on monitor B.
Another option is to resize your Window Capture window to the size of the video and resize the window.
I did the window capture try and react to an anime on Crunchyroll but the screen is pitch black only showing my webcam
Yep, unfortunately services like CrunchyRoll, Netflix etc will have an anti screen recording feature due to piracy. Best thing to do is download UA-cam clips and edit the video before publishing it.
thank you
You're very welcome!
Amazing Content Keep UP Solider
Appreciate it! Cheers for checking out the content!
I have no options with any of this?? Like window capture and all that
Definitely running OBS Studio?
@@TechNuovo yes sir
I learn a lo😢 from you sir .thank u
You're welcome! Glad to have helped.
I presume we'd need to hit 'start recording,' correct?
Yep. To record your footage to your hard drive, hit the 'Start Recording' button.
The image doesn’t show anything you pre recorded it and didn’t explain that part it’s just a blk screen
Can I use my laptop or do I need a computer
Laptop is fine but it's got to be powerful enough to stream or record and use OBS Studio.
@@TechNuovo it’s a new MacBook I just wanted to record reactions
How do you put it in split screen
Which part of the video are you referring to?
I got my self in the box and the UA-cam video in the background. It didn’t play and went it did. It was no sound.
@@TechNuovo I wanted to know if you can do split screen with OBS?
@@sjrahrico you will still have to control the video on the UA-cam player for it to play through OBS.
For sound, you will need to find where your sound source is coming from. If its your desktop audio then you will need to add an Audio Output to your sources.
@@sjrahrico split screen gaming do you mean? Or just splitting two image sources?
thanks man
Happy to help. Thanks for checking out the content!
WELL DONE
Thanks!!
In the video is he using OBS Studios or OBS streamlabs? The title doesn't specify which one he is using and I want to know because OBS studios is the one I want to use not streamlabs.
OBS Studios.
@@TechNuovo Okay sounds good that's the one I want to use to. I just wanted to make sure that was the one you were using in the video. Thanks for telling me!
This doesn't record the audio of the video you're playing by default. The one thing no one seems to address lol. Spent hours trying to get this working.
Have you got the source audio active on your Scenes? Bring in an Audio Input Device under your sources and direct that towards whatever audio you have set in your Windows settings (check this in your bottom right system tray).
When I transition to my 2nd scene (where my webcam is the full screen video) It disables my other webcam for the reaction part. Anybody know a fix to this?
How are you pulling your webcam into the scene? You could adding a separate webcam source, and then pulling that into each scene instead of a video device.
@@TechNuovo I have 2 seperate scenes using the same camera (video source) when 1 is active the other it just a black screen.
Thank you Sir I truly appreciate your tutorial the time you took. What I wanted to ask how can I do this without showing my face at all however I DO WANT THE SAME EFFECT WITH BOX AT THE BOTTOM WHERE YOU PLACED YOURSELF, I wanted to add a picture instead of mic motion effect. I'm going to try it in the meantime. Also another question lol please forgive. I have a revelator mic it's so sensitive it picks my neighbors. instead i have M58 i connect with my Zoom podtrak4 I so live it. How can i connect my zoom podtrak 4 with my obs and get that beautiful sound that i'm getting with Zp4 hope I made since thanks an advance @techNuovo
Okay
1. Audio effect.
If you've got a transparent .mov file of the audio effect, you can add it to Obs as a transparent video. In. OBS you can ticj the "loop" button so it repeats I'm not sure if there's any kind of plugin that will automatically react to your voice though. might have to do some googling.
2. If the zoom connects to your PC/laptop via USB, you might be able to add it as an audio capture device, meaning you can use anything plugged into the Zoom as a microphone. I don't know this 100% as never tested myself, but it sounds like it could work.
Awesome
Thank you!!
This was very helpful. Thanks for sharing!
Glad it was helpful! Thanks for checking out the content!
What do I do if I only have one screen? The problem I’m having is playing a video full screen, when ever I play full screen I can’t control obs
That could be a little tricky, especially with resizing the full screen UA-cam video. Though you could watch the video in a window, and inside of OBS, use a window capture source and crop the window capture to the video area and resize it in OBS.
so you lost me at youtube react overlay... how did u get that picture w the two windows .... small window and the big window..how did u even get that
I made it on Photoshop and saved as a transparent PNG so I could bring it into OBS. There's a tutorial on the channel on our Tutorials Playlist on how to make your own.
Can you just use your iphone for video and sound instead .
You could but this is more better in the long one , you can start out that way but then this way is your next step
I am unable to play a UA-cam video from window capture please help
I can only see the UA-cam video screen. When I click on it nothing happens
You can't click to play a video inside of OBS. You still have to click play on the browser window to play a video.
@@TechNuovo thank you. Got it 👌
Honestly I am confused with different tutorials on OBS, I really want to see how the youtubers does their music video
Which music video is this?
Can you stop the video you’re reacting to and then resume play ?
Yep. If you're on the browser window you can pause and skip etc like you usually would and it will still come through OBS.
Thanks for this video! This was so helpful.
You lost me at webcam background 1?
That's a background that I made in Photoshop.
well then how am I supposed to follow you? Good video but remember this is a tutorial so slow down a bit.@@TechNuovo
@@RozierRoma Yeah I'll remember it for the next one we do :) Thanks for checking out the content though :)
Why are you not responding to the people asking for the overlay
I do. I send them this video to learn how to create their own: ua-cam.com/video/bwW8DIWrkJo/v-deo.htmlsi=rCIN2BlV52QfAUN2
Thank you.
thx u so so much u helped a total nub like me no sarcasm i m really a nub
You're welcome! Glad we could help!
You aren't alone. I have watched too many videos and still can't get past the first steps. I had to stop and look up the work Overlay. I wanted to do a reaction channel. I thought it would be fun for family time, but I am thinking I need a Gen X tech channel because this is going right over my head and passed my ears.
@@user-tm4my4jb6d me 2 i m also starting a reaction channel! and obs is really awesome for that!
@@sakuraistrash2much Good luck I finally finished a practice video and I think 11:00 last night. I never fixed the echo. I just gave up. Lol
@@user-tm4my4jb6d HAHA i know its tough i m still figuring it out
good video just dosent show how to add my camera
Right click your sources, go to Video Capture Device. Choose webcam from the list.
1:41
you never told us how to get the boarder templates on the image. yours was already selected. lol
We've got a separate video on how to make basic overlays for OBS and live streaming here: ua-cam.com/video/bwW8DIWrkJo/v-deo.html
Thank you. Jesus bless you.
Thanks.
Nothing you are saying shows up on my screen.
Oh, very odd. Sorry to hear that.
and you said easy setup? everyone making it difficult and mixed.
I do apologise 😭 I thought it was relatively easy to add a couple of sources to OBS.
Thanks for checking out the content.
Information presented ok. Hard to understand.
I`m 56 years old - and it was not easy at all :-(
Apologies. Anything you need help with then please don't hesitate to leave a comment. We'll try and help where we can.
These instructions was horrible he moved to fast and he wasn't quite clear😂😂😂 thanks anyway
Thanks. Sorry you couldn't get on with the content. Any particular part you need help with?
This isn't helpful.
I don't know what you're doing a little after the six minute mark.
You say webcam background one.. brilliant...
What is that..
I don't see that?
Mine doesn't look like that.
You glossed over that way too quickly.
Hello. I've just watched from 5:00 to 6:42 and couldn't see where I said Webcam Background 1. If you're referring to where I said it at 1:07, when I'm adding it to my scenes, I made my background in Photoshop and added it as an image source and located the file on my hard drive.
We have a separate tutorial as it was requested talking about OBS overlays which can be found here: ua-cam.com/video/bwW8DIWrkJo/v-deo.htmlsi=DaIy4CexewnFh808
@@TechNuovo Oh, I'm sorry it was at 1:13.
Yeah you clicked through two or three different steps very fast.
I couldn't even see what it was you done.