I actually saw these on a Jeep facebook club, but watching your video on it is what sold me on them. Reason being, you hooked them to your turn signals, making them actually a functional thing. I have badges on both sides of my JKU, so I ordered two amber ones and hooking them to my turn signals, I will have the added turn signals for people beside me. Great added safety function. Thank you.
Thank you again for getting back to me on the Badge Glow, I ordered 2 amber! Can't wait to get them set up and looking forward to doing some amazingness with you!! :)
Thanks for all of your videos! Your video on the Rough Country light controller sold me on it. And your install video was even more helpful than the instructions provided with the kit! Keep it up!
Would have been nice to see during 5:53 - 6:10, the process of wiring the badge wire to the headlights. Video is missing a very important part. Where/How did you connect it? What do you mean by "this marker"?
Nice vid Dex, thanks...get the Rugged Ridge Hurricane Flares. I just installed them and they are awesome. They look rugged and would look great on your Jeep.
Does it shine through the badge at all? It seems like it just kinda lights up behind the badge so at night when it’s on it’s just a light on the side. It’d be nice if it shone through so you could read the badge at night, nice video though
@@adventuredex I was just asking if you've ever seen a Godzilla decal . I'm a big Godzilla fan and thought it would be cool to have one to slap on the side of my jeep. I thought you may have come across one before and would be able to give me a website to look at.
Very cool LED backlighting... I would of suggested taping the wire with electrical tape, or a heat shrink to protect the wiring from shorting within the pilot hole you drilled. And, I would of applied some primer paint on the inside and outside of the pilot hole to prevent the bare metal from rusting. Just saying.
Hey I need a under hood fuse relay (extra) I have the left pillar and a over head switch controls for my accessories but I can't hook this up together unless I have this box any advice
Nice video write up Dex! Quick question, if you had to test an LED light bar, such as the 20” one you have. How can I just test to see the brightness without actually hooking it up to a car. Would a direct battery connection to the power leads of the LED bar, work to temporarily see the brightness? Thanks!
Thanks for watching. No issues mixing wires assuming they are very close in size. I didn’t run a fuse, I just tapped into the power from the headlight. Thanks for watching!
+Anthony Marasco Simple, just Connect the wires from the badge glow to the wires in the headlights. Positive to positive negative to negative. Thanks for watching
It would have been a good idea for you to use a sleeve on the wires at the point were you drilled because the vibration Might cut through the Plastic coating of the wire and you're gonna have a short circuit
AdventureDex , well it two separate boxes and I thought you get a hook each box up to a fuse but there's only one fuse for one of them so I was told that I needed to separate fuses slots
Haha I guess its the same reason why people name anything they love... Their favorite baseball bat, favorite tools, etc. When your passion about something you give it a name so you can connect with it :p Thanks for watching!
Thanks for watching this video! I had a a lot of fun installing these easy Badge Glow & emblems! #jeepwave
Where did you get those rough country badges from.?? You got a link?
COlorado Grown life
I actually saw these on a Jeep facebook club, but watching your video on it is what sold me on them. Reason being, you hooked them to your turn signals, making them actually a functional thing. I have badges on both sides of my JKU, so I ordered two amber ones and hooking them to my turn signals, I will have the added turn signals for people beside me. Great added safety function. Thank you.
Oh, actually I see you hooked them onto the fender marker, but you could probably hook them to your turn signals, correct?
No replies? Is this video too old for a reply?
I honestly think the decals looked a lot cleaner vs the badges.
You totally remind me of my best bud, but he's not a Jeeper. I LOVE YOUR VIDEOS because you love your Jeep as much as I do MINE. Thanks, DEX!!!!
Thanks rob!
I love how you are so enthusiastic! I wish you would get a Jeep Trailhawk and do some detailed mods on that!!! ;-)
Thank you again for getting back to me on the Badge Glow, I ordered 2 amber! Can't wait to get them set up and looking forward to doing some amazingness with you!! :)
OMG I LOVE IT!! I LOVE TO LIGHT UP MY JEEP!!
the little details that make a big difference. very cool OIIIO
That is a great saying!! Totally Agree!!
Thanks for all of your videos! Your video on the Rough Country light controller sold me on it. And your install video was even more helpful than the instructions provided with the kit! Keep it up!
Did it hurt anyone else to see the drill going in the jeep.. made my stomach turn.. felt huge relief seeing that it didnt slip and went well
I took a 4 inch hole saw to mine so no
gotta do what you gotta do
Gentle punch does the trick to make a pilot dot for the drill.
This was great. Something we can all afford to do. Thank you. Really!
Nice dex I like the glow lux pretty cool
Thanks Yaniel!
I wish you would have showed a little bit more detail how you connected the power through your blinker so I know how to do it exactly by myself
I just used some splice clips. Super easy!
Would have been nice to see during 5:53 - 6:10, the process of wiring the badge wire to the headlights. Video is missing a very important part. Where/How did you connect it? What do you mean by "this marker"?
Simple, just use a splice clip and connect it to any power source you want. Thanks for watching
Marker light...
Yo Dex you got a badass Jeep bro
Thanks Tommy!
I wish you would have shown video of how you actually fished and wired the wire to the side marker.
Great video bro. I'm getting my first Jeep this weekend!
Awesome video. I enjoy your channel and all your content. Cheers!
I appreciate the feedback! Thanks for watching!!
Nice Dex, i like it... I just might add that badge glow to my jeep. I give this video 4 out of 5 BRO HANDS!!!!
LOL thanks man!!
Nice vid Dex, thanks...get the Rugged Ridge Hurricane Flares. I just installed them and they are awesome. They look rugged and would look great on your Jeep.
Thanks for the suggestion! I will look into them!! #jeepwave
4 years later.. how did it hold up? If still installed. Any suggestions or tips
Nifty lil led, looked good.
Thanks for watching!
Where did you get the American decals for the side windows looks dope ? It’s not in this video but i notice on other videos
Realize this is a few years old, but where can I get that awesome Rough Country Off-Road Emblem for my Rubicon???
Hey great video. where can I get that rough country emblem and do you know of a place you can make a custom one as well?
Thanks for the comment! The RC emblem are not for sale... I had to ask RC for a favor to get one lol
Man that sucks but thanks for reply. they should sell them looks awesome. On another note do you have a video of how to install soft top to jeep?
Do you put that on both sides or just the driver side?
Both but just for fun!
Where would I go to buy different kinds of badges for my jeep? I have a 2019 jeep Cherokee Limited.
I'm trying to figure out where i can get some of these badges for my jeep.
Check the link in the description. Thanks for watching
I got those ones. How did you get the specialties. Like I want smittybilt, Rubicon Express etc
Does it shine through the badge at all? It seems like it just kinda lights up behind the badge so at night when it’s on it’s just a light on the side. It’d be nice if it shone through so you could read the badge at night, nice video though
Correct, it only shines around the badge not through. Cool idea tho! Maybe 2.0 lol Thanks for watching!
Thinking about getting a jl. Wanna do all the upgrades and mods myself...
You should!! Go for it!!
Thanks for all the handy tips!
Anytime!
Maybe test that light up keep logo to make sure it works befor drilling a Hole in your jeep
ITS so Cool. I am trying to find the Rough Country OFF-ROAD Badge...Could you please let me know where I can find those badge? thanks a lot!
Have you ever seen a Godzilla jeep decal?
No what’s that??
@@adventuredex I was just asking if you've ever seen a Godzilla decal . I'm a big Godzilla fan and thought it would be cool to have one to slap on the side of my jeep. I thought you may have come across one before and would be able to give me a website to look at.
is the wiring to ur headlight red and black, if not what color wire to ur headlight was the hot
Very cool LED backlighting... I would of suggested taping the wire with electrical tape, or a heat shrink to protect the wiring from shorting within the pilot hole you drilled. And, I would of applied some primer paint on the inside and outside of the pilot hole to prevent the bare metal from rusting. Just saying.
Thanks for the suggestion!
might i suggest grommet for those wires
Great suggestion but I couldnt find a small enough one to fit! Thanks for watching!
I need that last decal!🤣
Haha Link in bio!!
Nice man, just went to get the glows for my jeep and almost all are sold out except purple lol and that won’t flow. Can’t wait till I can get some!
Absolutely man! Thanks for watching!
Nice jeep, very clean...do your adventures include trips to the mall and soccer practice?
lol
Aaaw “20 subscribers” made a joke
@@647live When it's subscribers that justifies your existence...🤣
Where did you get that rough country badge?
Very cool little add on thanks OlllllO
Thanks for the info and how to install it!
+ACA JEEP Anytime bro!!
Nice video dex
+Salvador Perez Thanks!! 🤙🏼
Do you think that the badge glow would fit on the cover plate you put on when you relocate your factory rear license plate ?
It is a different shape so I don’t think it would fit. Thanks for watching
Nice! Awesome video dex!
Thanks bro!
Hey I need a under hood fuse relay (extra) I have the left pillar and a over head switch controls for my accessories but I can't hook this up together unless I have this box any advice
+blakkkatt9 why can’t you connect it direct to your source?
Which wire is used to light up with clearance lights?
what do you mean clearance lights?
The side markers. I want the badge glow to turn on when the yellow side lights are on. Thanks!
You can tie them directly into the side makers. Just use splice clips.
Thanks for the handy tips,awesome video Dex👍. Where can I get that 1941 decal.(in red)
Thanks! I got mine from amazon
@@adventuredex thanks so much Dex👍
How can I get the trailrated in Blue and black?
Im a yj guy but doesnt that light blink on the fender flare marker when you turn your blinker on?
No the fender lights are just markers. They don't blink. Thanks for watching!
you could also just heat up the stickers with a hairdryer and they would peel right off. no residue
Nice video write up Dex! Quick question, if you had to test an LED light bar, such as the 20” one you have. How can I just test to see the brightness without actually hooking it up to a car. Would a direct battery connection to the power leads of the LED bar, work to temporarily see the brightness? Thanks!
+diver362 9V battery is the pro tip 😜😜
yes ..red to positive & black to negative
Very nice!
+TheDenverJK Thank you
where can I get a steering wheel knob that will fit a 2017 wrangler?
What do you mean by steering wheel knob?
A knob spinner that goes on your steering. everyone I've tried doesn't fit the steering wheel size.
I bought one after watching your video. Did you use a 12v inline fuse for the lead wire? Did you have any issues mixing wire gauges?
Thanks for watching. No issues mixing wires assuming they are very close in size. I didn’t run a fuse, I just tapped into the power from the headlight. Thanks for watching!
AdventureDex thank you Sir...
Do those come in only red or do they offr other colors?
How do you wire the badge glow to the head lights so the badge glow comes on when the head lights turn on??
+Anthony Marasco Simple, just Connect the wires from the badge glow to the wires in the headlights. Positive to positive negative to negative. Thanks for watching
Where'd you get that double pod light bracket?
For the Badge Glow Emblem did you have to buy a separate extension wire or did it come with it?
I extended the wire myself. I used 14 gauge wire. Thanks for watching!
can you send me the link to the wire?
Darrell
That jeeps to clean, and now it has a throbbing red zit on its cheek.
Dannnmmm
LOL Thanks for watching!
Dumb. No one makes a tutorial with a dirty ride son. Just keep watching
I want to know where I can find the lights
A company call Badge Glow makes them!
Great vid! Where did you get the rough country badge?
+Jackson Davis Thanks man! I had to pull some strings!!
Man I wish RC sold those emblems. But evidently they are available to only dealers who install the lifts.
Yeah, I had to pull some strings to even get one LOL
How does the red look with the original badge?
+Tim Bucktwo Looks awesome! Thanks for watching
It would have been a good idea for you to use a sleeve on the wires at the point were you drilled because the vibration Might cut through the Plastic coating of the wire and you're gonna have a short circuit
That’s a good idea! Thanks for the suggestion!
Or you can fill the hole with silicone and this will also aid on keeping the hole from rusting.
Where did you get the Rough Country decal?
+glenn pasquel They don’t sell it publicly, I had to ask for a favor! Haha
Not to be a hater but that was the one decal i could do without.
+timnmichellle No harm done! Everybody has their preference! Thanks for watching
AdventureDex get me one too man please
How cool is that?
+The Shatzer Very! Thanks for watching
Theme of the Jeep. Red and black. White Jeep.
LOL thanks for the correction! :p
Where do you get an extra extension wire from? I’m new to the Jeep community help
Any 14-16G wire will work! Thanks for watching
Need more badge!
Haha! Thanks for watching
I just like this guy. Lol
Thanks! I like you too!
Are u planning to get new fenders in the future?
Yes!! Any recommendations?
AdventureDex just search for some quickly but I like the xrc
me too!!
MetalCloak fenders is what I want but they are pricey.
Doesn’t goo gone remove paint?
The idea is cool but only half way there. They need to create a translucent badge so the entire emblem is lit up.
That’s a cool idea. Thanks for watching
It looks like you ran the wire through the fender without a rubber grommet. Hope you don't get a short.
+Kevin Javorsky Rubber grommet is a good idea. The wires are covers as well so it is unlikely they would short. Thanks for watching!
How did you get all the badges from the company?
Contact them and make your order. Thanks
Any Adventure Dex badges for our Jeeps?
Where can I get the rough country patch ?
What glue or sticky paste did you use to stick the decals on? Or did you use the sticky stuff that came with the decals?
It comes with 3m double sticky tape. All you do is peal and press. Thanks for watching!
Lemon extract oil works better on the glue.
When you connected the badge glow, does it light up when you turn on the turn signal as well? Or only when you turn on the headlights? Thank you!
were in can get the led light
The company is called Badge Glow! Thanks for watching!
What is the size
What is the size
Dope!
I appreciate it!!
How'd you get these badges?
Where can I get rough country badge
Apparently they are exclusive to Jeeps that were bought from RC. I had to beg for it LOL
AdventureDex if anything try to get me a set bro please. I'll pay you through PayPal. I fell in love with those RC EMBLEMS
I wish I could!!!
amazon 13 bucks canadien
Where can I order the trail rated badge glo?
What tires are those?
Très beaux
Ooooooh I like!!!
“Badges? Badges? We don’t need no stinkin badges..!”
Where I can find the badge glow for the Jeep Wrangler I can find that
Has anyone found where the led badge glow is sold?????
Check the link in the description!
Good Stuff!!
Thanks!!
@adventuredex what exhaust are you using?
Oh by the way I have the apollointech systems.
+blakkkatt9 Connect it directly to your source....
AdventureDex , well it two separate boxes and I thought you get a hook each box up to a fuse but there's only one fuse for one of them so I was told that I needed to separate fuses slots
+blakkkatt9 Connect both boxes to one fuse and add a bigger fuse amperage. Hope that helps
Sorry for rookie question, why do people name their jeeps? As in give jeeps a name or nickname. Thx
Haha I guess its the same reason why people name anything they love... Their favorite baseball bat, favorite tools, etc. When your passion about something you give it a name so you can connect with it :p Thanks for watching!
because there on drugs
Geep Geep Where on drugs??
Night shot bro!
Thanks!
i like it !
+MsLeelee94 Thanks!! 😃
wow👍👌👌👌👍 I like it 😎👍👍
Thank you!!