Do you know what motor he used and where I could get one a bit larger like it? I'm gonna try to make this for a rowboat. I would like to get some good speed as well and any suggestions on motor size would be a huge help. I want to get good speed maybe 9-10 nots if possible. I don't know how to find the propeller either. Is this design going to last? what should I be watching to keep it in top condition? Any information would be much appreciated!! (:
Maybe try using some rubber cement glue to glue the rubber seal to the motor and put grease inside the rubber piece so it stays still while the shaft spins freely
Looks like it worked. Not sure if it's water proof enough, but if you keep it turned upside down when not in use to let any accumulated water drain out, it should be ok. My minn kota 40# leaked for years(damaged shaft keep eating seals) before corrosion finally killed it.
Im going to make a very important suggestion. Use PVC glue, not that stuff you were using. Silicon sealant is needed as well. And while I'm at it, definitely a bigger prop
Actual pvc glue holds better than simple weather strip adhesive. BUT the problem using pvc glue is this--- what happens if you're out and need to make repairs? With weather strip adhesive you can pull it apart.
Yeah I would not be very efficient prop too small motor too small be okay for Putting around a small pond maybe let's just say I wouldn't lose sight of the dock
Thewater seal probably wont keep water out but thats okay because keep in mind people intentionally run these motors under water to break them in for use in an rc car. Great video!
It worked way better than I would have thought, trolling motors aren't made for speed, the only thing I would have done is make it have a reverse which is super easy with a DC motor, just simply have a switch to reverse the polarity
Amazing video. Works great. But i do have 1 question and its just from pure curiosity. Why, in videos like this i see, do people not cut their pinky nails. Is this a religous thing.
awesome, beats the paddle, but its the same as any electric motor, 20 mins dead battery, break out the paddle, im building one with weed eater motor so gas last as long as i want to go with out paddle.
Verdammt coole Lösung und noch dazu fast Umsonst die Röhre mit Kleber & Bögen Kosten nicht mal 10€... der Motor und die Batterie natürlich je nach Leistung. Werd mir so ein Ding für mein BellyBoat bauen, allerdings 2 strahlig und mit Metall Schrauben. Das Plastik Ding überlebt bestimmt kein Tag, ein mal Grundkontakt dann war's das. Gerade für BellyBoate eine Spitzen Lösung weil man die Halterung angleichen kann wie man sie braucht und es das Ding kaum Gewicht hat!!! Gruß Marco
I dont mean to be off topic but does any of you know a tool to get back into an instagram account? I stupidly forgot my password. I appreciate any tricks you can give me!
this motor wont last long in water because you sealed motor air circulation, so when motor get hot there is no air circulation to make it cooler and it will het up and burnt down!
That’s very creative on a budget type of rig. What size is that dc motor by the way? After this video I did look up on dc motors and I see they have other motors that are much more powerful in terms of torque and rpm. You should upgrade your version by putting quad motors not just that but a more powerful motor with a custom made 5 blade aluminum propeller. Have it into the water 6 to 8 inches down in the water. Swap the battery out to 24v. If u want to be more creative use solar charge and see if you can get that inflable to plane over 15miles per hour all electric. Super light and powerful.
You guys need to scale that engine up. Maybe consider using a common starter off a small engine and bigger pvc pipe for the housing. Defintely beats a grand for a kayak engine though
I'd say the design needs improvements. The last clip of him cruising is sped up, probably by 2x judging from how fast the ducks are moving. He already looks slow, then look at it in .5x
Holy crap read a few comments, really guys nothing positive to say really. lmao this guy is doing it, you guys just have bad comments to say and pick the fun out of it. wow its all just for fun. Make a better one, do a video of it and load it on you tube.
greta idea. i would use a brushles in runner motor that does not care if it gets wet. a firmer prop with metal spindle and a lipo battery of 5000 mah at 11.1 volts.
Y cuanto te va a durar la gomita que has puesto como sello de agua en la hélice, ahí tienes que colocar un sello de bomba, es algo parecido pero te va a durar varios años....Saludos
According to channels like this, if I just own a hot glue gun, I can send astronauts to space....
LOL...you are funny
Pretty much
The now politically incorrect a team used to do it🤣
If you own imagination! Skip games, social media and the couch!
not bad considering its made out of cheap materials the speed is great I rate it 10/10
Enjoyable to watch your video
Nice work
Nice video and good idea
I give it 5 STARS for simplicity and ingenuity.....
I would use a larger motor, prop, and battery......
Great video
Do you know what motor he used and where I could get one a bit larger like it?
I'm gonna try to make this for a rowboat. I would like to get some good speed as well and any suggestions on motor size would be a huge help. I want to get good speed maybe 9-10 nots if possible. I don't know how to find the propeller either. Is this design going to last? what should I be watching to keep it in top condition?
Any information would be much appreciated!! (:
Looks like a wading pool with a toy motor,but a great idea!
I also subscribe and like your video
good creative cool greetings success
Nice but.... Water will get in the motor very fast...
Good work ! But very slow. Maybe it's
low voltage?
Good Job
Thanks i will like your vid
you inspired me to made similar for my kayak! I'll use flexi shaft and motor will keep out of water! but idea is brilliant!
Ya promoción q bueno haces😁😃😁🤠☺️🐕🐆
Hola
Nice Work
WoW super like
Top parabéns!
Cool..!! A home made trolling motor.
Fine design of boat and motor for calm days. You win the prize for lowest cost motor.
A parts list sure would have been nice but still brilliant
This is the best thing I've seen in a long time 🤗👍
Looks good in theory, but the shaft seal wont last long.
I will say about 10 minutes, before the water sneak in...
Maybe try using some rubber cement glue to glue the rubber seal to the motor and put grease inside the rubber piece so it stays still while the shaft spins freely
Looks like it worked. Not sure if it's water proof enough, but if you keep it turned upside down when not in use to let any accumulated water drain out, it should be ok. My minn kota 40# leaked for years(damaged shaft keep eating seals) before corrosion finally killed it.
Very good.
I think its better to immerse the motor with oil so no water can get in. It can also provide cooling property to motor without short circuit
..marine grease
I like it
Im going to make a very important suggestion. Use PVC glue, not that stuff you were using. Silicon sealant is needed as well. And while I'm at it, definitely a bigger prop
Make one your self dip shit
ㅇㅅㅁㄹㄹ
Actual pvc glue holds better than simple weather strip adhesive. BUT the problem using pvc glue is this--- what happens if you're out and need to make repairs? With weather strip adhesive you can pull it apart.
Guy H. rB6
Yeah I would not be very efficient prop too small motor too small be okay for Putting around a small pond maybe let's just say I wouldn't lose sight of the dock
Very awesome love the idea s
Мотор должен охлаждаться, а то сгорит за час))) За изобретения+55 Лайк!!!
Уплотнительная резинка на вале будет пропускать воду.
Nice vbio
Nice !! Like !!
Italo Lima gaand videi
Nice
No lube on the seal, it will leak, but before that the motor will overheat with rated load.
Thewater seal probably wont keep water out but thats okay because keep in mind people intentionally run these motors under water to break them in for use in an rc car. Great video!
Very ingenious. Works pretty good
It worked way better than I would have thought, trolling motors aren't made for speed, the only thing I would have done is make it have a reverse which is super easy with a DC motor, just simply have a switch to reverse the polarity
Good idea
Cool this is what i need to make my movie
beats the hell out of rowing all day! good job
Amazing video. Works great. But i do have 1 question and its just from pure curiosity. Why, in videos like this i see, do people not cut their pinky nails. Is this a religous thing.
awesome, beats the paddle, but its the same as any electric motor, 20 mins dead battery, break out the paddle, im building one with weed eater motor so gas last as long as i want to go with out paddle.
Lol nice coke nail on left pinkie finger ✌🏼
Hello boss, i love this video but No parts list ? Thanks
Great idea ! What motor is this?
Hi... that look easy and possible to anyone , top👌
thanks for sharing
Verdammt coole Lösung und noch dazu fast Umsonst die Röhre mit Kleber & Bögen Kosten nicht mal 10€... der Motor und die Batterie natürlich je nach Leistung.
Werd mir so ein Ding für mein BellyBoat bauen, allerdings 2 strahlig und mit Metall Schrauben. Das Plastik Ding überlebt bestimmt kein Tag, ein mal Grundkontakt dann war's das.
Gerade für BellyBoate eine Spitzen Lösung weil man die Halterung angleichen kann wie man sie braucht und es das Ding kaum Gewicht hat!!! Gruß Marco
Oh, this is brilliant
I dont mean to be off topic but does any of you know a tool to get back into an instagram account?
I stupidly forgot my password. I appreciate any tricks you can give me!
@Forest Andres Instablaster ;)
Hi, nice work! where did you get the rubber shaft sealing?
good job on the motor, but I'd like to see more about the boat!
Parabéns amigo inventor,vc certamente seria um bom motivo para ser estudado pela NASA!
Super like!!
Tu sabes escribir😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😩😩😩
this motor wont last long in water because you sealed motor air circulation, so when motor get hot there is no air circulation to make it cooler and it will het up and burnt down!
Chạy bao lâu thì hỏng vậy bạn
It is certainly better than rowing
Great you made it and you sailed also that what i liked.
Thanks for sharing
Es dinero tirado, en cuanto se gaste (10 minutos) la goma que puso como sello de agua, le va agua al ruleman y al motor y adios....
B cho m hỏi mua cao su chống ngấm nước ở shop nào vậy. Cám ơn B!
cut the bottom off a 20oz pop bottle and glue to the front end on bottom by motor may help cut thru the water a lil better with it coming to a point
That’s very creative on a budget type of rig. What size is that dc motor by the way? After this video I did look up on dc motors and I see they have other motors that are much more powerful in terms of torque and rpm. You should upgrade your version by putting quad motors not just that but a more powerful motor with a custom made 5 blade aluminum propeller. Have it into the water 6 to 8 inches down in the water. Swap the battery out to 24v. If u want to be more creative use solar charge and see if you can get that inflable to plane over 15miles per hour all electric. Super light and powerful.
if you put a big pipe around the fan you will get more power
The video is very good. Can you give me more specifications of the engine used !? Thank you!
IT WAS A 775 DC MOTOR.
Nice
Good
Is it really waterproof?
bạn người vn hả. nó kín nước ko bạn. sợ chạy thời gian cái nó vào nước quá bạn ơi.
You guys need to scale that engine up. Maybe consider using a common starter off a small engine and bigger pvc pipe for the housing.
Defintely beats a grand for a kayak engine though
It's for lite pontoon, kayak. Bigger needs bigger battery, stronger support, etc. But free to improve!
Great DIY
Chạy 1 thời gian có bị vô nước ko vậy bạn.
cool vid but the motor wont last you covered the cooling holes and thermally sealed the motor
No i tak pływa na tej łupince 😀
Excellent
you can add a solar panel so that you can have a roof also to protect you from heat while fishing
good idea..)
Bagus sekali ide nya
very beautifull
Very low tech, but efficient. At least you can use the paddle for backup just in case. Not bad.
Great but better to order from us directly
Very good, thank you
bảo đảm 1 câu cái nút công tắt nhấn đó xài ko quá mấy lần bấm tự chảy nhựa hư luôn .
super
I'd say the design needs improvements. The last clip of him cruising is sped up, probably by 2x judging from how fast the ducks are moving. He already looks slow, then look at it in .5x
How did the rubber seal work out? It looks like a design weakness to me.
Holy crap read a few comments, really guys nothing positive to say really. lmao this guy is doing it, you guys just have bad comments to say and pick the fun out of it. wow its all just for fun. Make a better one, do a video of it and load it on you tube.
good
greta idea. i would use a brushles in runner motor that does not care if it gets wet. a firmer prop with metal spindle and a lipo battery of 5000 mah at 11.1 volts.
Nice now u just need a big bracket with quads and your deep sea fishing in your lake lol
Simple yet effective! But I would not wana sit in that tiny boat 👀
i like it....
nice idea
Freakin' genius. Love this video. Way to go man.
How will that brush motor cool?
One VC man making an electric boat used in guerillar war against in Vietnam.
U wot m8?
Классный мотор получился !!!))))
So from today, the fishermen do not want Minn Kota anymore ...
... We want the man in the green shirt!
Wonderful
Got the general idea now go bigger
What's with the coke pinky? If you use threaded fittings you could do repairs/replacements wihtout having to rebuild the whole thing.
Good work!
Xuất sắc
Y cuanto te va a durar la gomita que has puesto como sello de agua en la hélice, ahí tienes que colocar un sello de bomba, es algo parecido pero te va a durar varios años....Saludos
O motor vai superaquecer com certeza!
excelent, you made a best word with this idea.