Neff slide and hide oven door stripe profiles (side,profile rails ) changed .
Вставка
- Опубліковано 8 вер 2024
- How to change the PROFILE STRIPE (SIDE RAILS )on a Neff Slide and Hide oven door .
First time doing it with the help of the costumer ,uncut movie.:))
Thank you .
Please pay attention to the messages while watching the movie .
Thankyou, always appreciate people who take the time to make this helpful videos. I had the same issue which was caused by a faulty left hand hinge. Very, very helpful. Yes, sooo many people dont know how to calibrate drill clutches. Well done!
That was really helpfull. Happened to me twice with my neff. Thank you so much for posting this video. You helped me save a lot of money :)
Thank you for posting the video chaps ... not at all sure why you have had some thumbs down. I watched the video a couple of times to familiarise myself with the disassembly and assembly, then replaced the left hand rail in 10 minutes, taking plenty of close-up photos when dismantling just to double check what went where. The oven door cost me £30 to repair, I dread to think what it might have cost to get someone out to do it ... I do know a replacement door is best part of £500 ... so thanks again chaps 😀
Thank you for your reply glad to hear it helped, i must say that was the first time when i done it ,live and in the costumer house so i might be a bit left handed there :))
How do you change the handle on this oven door?
Je la vitre de mon four casse jeboudre un numéro de leçon pour appelé an reparateaur
Hi. Is there one more glass on top?
Yes
Why did you have to change them?
One of it got broken , split
UNTERESTING video the guy doing it made some classic mistakes and ended up putting back together incorrectly although it would work the way he did it he was not a bsh engineer i was 21 years.
using an electric drill during assembly is risky you can strip plastic threads and if you drop drill it will probably smash the glass more expense use a hand tool torx 20
also the zinc trim over the ali trim on the handle end of door he fitted it underneath alloy it goes on top thats what the 2 dimples are for to hold it in place also you must keep the glass panels together in one p[lace they only fit one way if you fit them incorrectly they could shatter during oven clean process.
Mr Ex Bosch Engineer if you will pay more attention to the messages coming out on the screen you will maybe see that it was said that the aluminium trim will go first then the stainles steel one .
The fact that is used a electric screwdriver is not wrong as long as you know how to use it and it is used with the correct cluctch setting as in the film . The film was made with the costumer who fully trust the engineer and his skills and it was the first time when it was done on a hide and slide oven door , thats why took a bit more time and a bit left handed . Sliding rails were broken and the door was stuck half open with the rollers against the glass. Job was done on site , costumer was supper happy .
But dehhh is more easy to throw with stones and mud instead to say congratulation and thank you for your help , or maybe you are loosing money now because people are looking here, doing it and are not calling Mr Bosch Engineer to do it 😅.