Hey could I pay you to repair mine when I plug my charger in the board flashes the charging signal then when my charger is completely in it doesn’t charge
Common problem is a wire comes off of the board causing no power no charging. The wire is near the center of the hoverboard and you will find it dangling loose. I fixed 3 of them for this problem. Very easy fix. Squeeze the female end to make the connector fit tight. I apply hot glue to keep the connection from working loose. The best fix if it happens again is cut the end connector off and solder the wire onto the board.
Can you tell me what exactly the symptom is for this problem? My kid's is not charging or turning on, the charger is blinking the red LED, but the LED on the charger box isn't even lighting up all the way like it would normally do when charging. The charger box is also lightly beeping in time with the red light flashing, very dull flash. I will take this thing apart and look and look for disconnections, but this video got straight into a disassembly and threw me off, I'm not sure what the initial symptoms are he's fixing. This Nova hoverboard is almost brand new, it's not a year old yet so I'm thinking it must be under warranty, but if it's just a plug inside I may check that out, especially if it's a common problem.
Very good video sir! I have a razor hoverboard that got ran through wet grass, so now when we try and power it up we don’t get a response. But when we plug in the charging cable to the unit all the lights light up and it sounds off with a single beep. Do you think the little bit of water fried anything on one of the boards?
Fantastic job =D Love a nice genuine fault like that, rather than someone having opened and made it worse etc! LOL @ not getting to see you test it out whilst standing on it - was kinda looking forward to that bit lol!
Hover 1 Hoverboard. The 42 volt aftermarket charger had a different wiring pattern than the original chager. I had to move the black wire over on the charging port inside the hoverboard so that it was directly across from the red one. I had immediate results. (good results) RonA
If your hover board won’t charge here is something that worked for me. Turn it off Plug in the charger hold down on the power button until it turns on. It should start charging.
a verry nice problem to be fixed, some one sent me a hoverboard for repair, that does not charge, and when i turn it on, the side blue light is alwys on, and the motors does not spin, i charged the battery using wires directly from the charger, it charged perfectly, but when hooked to the motherboard and pluggign in the charger, it does not charge and there seems to be no short on the mother board, but what drove me crazy is that i was not able to calculate voltage on all the components from the same GND spot, i have to change the black probe position to another gnd spot, does the motherboard have more than three separated boards in it? i am stuck on this problem... can't get it to start again, i will change the lights sensonrs on the gyroscope board and see about the charging problem later, some help would be appriciated...
Hi, Thanks for the message. Not much of an expert on hoverboards, sorry, I lucked-out on that one as the fault was obvious. I since gave the hoverboard back so can't check but I think it had a main board and 2 gyro boards only. There was also an led board on the top side in the middle. I would have thought that all the grounds should be common as there are wires between the main board and the two gyro boards and one of them is probably ground. Not 100% sure though.
Hi, Unfortunately, I gave it back to my friend after fixing it but, if you drove it through snow, maybe water got in near the wheels so see if anything damaged there. All the best.
you know how when the charge finishes, you can still open your hover board but it closes in a minute. so if my hover board ran out of charge and i cant open it anymore, is there a problem or is it usuall that if you dont put it on charge for a really long time it automatically shuts down??
Hi,Sorry but I am not sure as this was not my hoverboard. I was just repairing it for a friend. Personally, I wouldn't leave one charging unattended for a very long period of time as the quality of the batteries, chargers and protection appears to vary greatly between makes.
Hey, can you fix mine for me ? Ive been trying to figure out what’s going on with mine, and I think it’s the same problem. Please get back to me and let me know. Thanks.
I am usually lost when it comes to electronic repairs, but you're great at explaining in an easy to follow approach thanks going to try.
I’m about to use this to try and fix this board I have, wish me luck! Takin it apart now
Hey could I pay you to repair mine when I plug my charger in the board flashes the charging signal then when my charger is completely in it doesn’t charge
Good job! Thanks. I would like to know how you found the correct part being that it was destroyed and how you repaired the circuit board.
Common problem is a wire comes off of the board causing no power no charging. The wire is near the center of the hoverboard and you will find it dangling loose. I fixed 3 of them for this problem. Very easy fix. Squeeze the female end to make the connector fit tight. I apply hot glue to keep the connection from working loose. The best fix if it happens again is cut the end connector off and solder the wire onto the board.
Can you tell me what exactly the symptom is for this problem? My kid's is not charging or turning on, the charger is blinking the red LED, but the LED on the charger box isn't even lighting up all the way like it would normally do when charging. The charger box is also lightly beeping in time with the red light flashing, very dull flash.
I will take this thing apart and look and look for disconnections, but this video got straight into a disassembly and threw me off, I'm not sure what the initial symptoms are he's fixing. This Nova hoverboard is almost brand new, it's not a year old yet so I'm thinking it must be under warranty, but if it's just a plug inside I may check that out, especially if it's a common problem.
Very good video sir! I have a razor hoverboard that got ran through wet grass, so now when we try and power it up we don’t get a response. But when we plug in the charging cable to the unit all the lights light up and it sounds off with a single beep. Do you think the little bit of water fried anything on one of the boards?
i know it's pretty off topic but does anyone know a good website to stream newly released movies online?
@Wesley Omar Flixportal :D
@Caiden Roberto Thank you, I signed up and it seems like they got a lot of movies there =) I appreciate it!
@Wesley Omar You are welcome xD
My grandpa gave me this exact hoverboard begote he got sick and it wont charge. Thank you
help me too
mine do charge but when taking out the plug it never lits again and don't work
Fantastic job =D Love a nice genuine fault like that, rather than someone having opened and made it worse etc! LOL @ not getting to see you test it out whilst standing on it - was kinda looking forward to that bit lol!
No chance given the number of people I heard of who fell off these things 😂
Hover 1 Hoverboard. The 42 volt aftermarket charger had a different wiring pattern than the original chager. I had to move the black wire over on the charging port inside the hoverboard so that it was directly across from the red one. I had immediate results. (good results) RonA
My hover board works and turns on when I plug it in charge but I left it on charge for hours and when I take it out it doesn’t turn on
Sounds like the battery has had it or the charging circuit isn't charging the battery.
@@Plan-C if I replace the battery do you think it will work like normal again?
@@alimirzad6038 I really don't know mate. If the battery is old then that would be my first guess.
@@Plan-CI have the same problem, the board is only two days old!
@@kylethwaits9155 mine is only one day old and is not working after I charged it
If your hover board won’t charge here is something that worked for me.
Turn it off
Plug in the charger hold down on the power button until it turns on.
It should start charging.
This fixed my non charging issue! Thanks🎉 🎉
a verry nice problem to be fixed, some one sent me a hoverboard for repair, that does not charge, and when i turn it on, the side blue light is alwys on, and the motors does not spin, i charged the battery using wires directly from the charger, it charged perfectly, but when hooked to the motherboard and pluggign in the charger, it does not charge and there seems to be no short on the mother board, but what drove me crazy is that i was not able to calculate voltage on all the components from the same GND spot, i have to change the black probe position to another gnd spot, does the motherboard have more than three separated boards in it? i am stuck on this problem... can't get it to start again, i will change the lights sensonrs on the gyroscope board and see about the charging problem later, some help would be appriciated...
Hi, Thanks for the message. Not much of an expert on hoverboards, sorry, I lucked-out on that one as the fault was obvious. I since gave the hoverboard back so can't check but I think it had a main board and 2 gyro boards only. There was also an led board on the top side in the middle. I would have thought that all the grounds should be common as there are wires between the main board and the two gyro boards and one of them is probably ground. Not 100% sure though.
I knew that it had to be something simple, but now I know that i don't have the skill set to fix it anyway! 😅
Mines when I put my charger in it’s starts get when I take out it turns off and won’t turn on
It sounds like your battery has had it maybe? Not sure. Good luck.
Same for me did u fix it
@@megabhi I need to buy a new battery I think it might be the same for you as well
@@Bubb1y3wdym batteries
@@geomdungi127 like the battery that powers the board u can replace it
I ran my through the snow. Any ideas on what to do. Mine is the same model
Hi, Unfortunately, I gave it back to my friend after fixing it but, if you drove it through snow, maybe water got in near the wheels so see if anything damaged there. All the best.
@@Plan-C fs
Nice fix!
I haven’t used mine in a while and it isn’t turning on no lights or nothing just a beep I don’t know what to do
Sometimes a lipo battery can go so flat that the charger won't charge it due to safety. What voltage do you see on the battery pack?
you know how when the charge finishes, you can still open your hover board but it closes in a minute. so if my hover board ran out of charge and i cant open it anymore, is there a problem or is it usuall that if you dont put it on charge for a really long time it automatically shuts down??
Hi,Sorry but I am not sure as this was not my hoverboard. I was just repairing it for a friend. Personally, I wouldn't leave one charging unattended for a very long period of time as the quality of the batteries, chargers and protection appears to vary greatly between makes.
Hey, can you fix mine for me ? Ive been trying to figure out what’s going on with mine, and I think it’s the same problem. Please get back to me and let me know. Thanks.
Hi. I am NOT an expert on these to be honest. I just got lucky with this one. If it is the same fault then I can try to tell you the part number.
I used mine on the. Moon in 1967 it sucked
thanks for posting!
Nice job
Hi
Bro sorry but i aint gonna open my hover board sorry
Whta if it breaks