Brother DCP-L2530DW Unboxing, Setup & Review - Great cheap wifi laser printer with copy & scan! 🖨

Поділитися
Вставка
  • Опубліковано 24 лис 2024
  • Unboxing, setup and review of the Brother DCP-L2530DW all-in-one wireless laser printer.. copy, scan, and print. It's a relatively compact printer and is reasonably priced (I bought this one for £140 in April 2021).
    You can find it on Amazon here; amzn.to/322pEdR
    The 'starter' toner in that comes in the box says it's good for 700 prints (depending on % coverage), so I'll see how we get on with that. The drum is rated for 12,000 pages! In the video I show you how to install the toner cartridge and drum into the printer.. it's very straight forward!
    It's quite speedy, at 30ppm, and does duplex (2-sided) printing, which I found some of the HP equivalents don't do at this price. It was also a lot less bulky then the HPs.. well the ones that had a paper tray & did copy+scan, so I'm very happy with this one from Brother.
    So far it's been working well over wi-fi with a Windows 10 laptop (no drivers needed to be installed) and an iPad (via AirPrint). Scanning worked without a hitch in the Windows-based 'Fax and Scan' app. I didn't try scanning on the iPad, but there's a Brother app for that.
    I'm hoping that using 3rd party toner will work just as well as it does in the Brother HL-L2375DW I own.. I'll report back as this one gets some use by our grandparents. The unboxing of the HL-L2375DW is here; • Unboxing the Brother H...
    The 3rd party toner I've used in my Brother HL-L2350DW without any issues is here amzn.to/2QPpB3k - I can't guarantee they'll work with the DCP-L2530DW, nor that Brother haven't updated the firmware to detect them, but they worked fine for me & I currently have one installed and working. Worth a go.. since you get 2x for about £30, and you can return them if they don't work.
    I'm using the built-in printer options on the iPad which scans the wifi for available printers & shows it as an option when it finds it. That can sometimes take a little bit of prodding/cajoling to initially appear when you're turning it on from cold, but generally it's quite reliable. I don't use any Brother apps or anything like that, which is nice. Power consumption when turning it on is ~1kw, but that's just as it warms up and not for long (under a minute). If you don't use it often, just long-press the power button to turn it off (which is what I do). Power consumption is stated to be; printing=440w, ready=42w, sleep=6.2w, deep sleep=0.6w, off=0.03w.
    I only recommend products I buy & would use myself and all opinions expressed here are my own. This content may contain affiliate links that (at no additional cost to you) may earn me a small commission.
    #brother

КОМЕНТАРІ • 103

  • @paulsz6194
    @paulsz6194 Рік тому +5

    At 2:33 , its not a heating strip, but the charge corona assembly, which puts a positive charge on the drum, to attract tbe negatively charged toner.

  • @tedebaer1
    @tedebaer1 2 роки тому +9

    You open the back when you print thicker paper or envelopes so they dont need to bend.

  • @AA-xm7rt
    @AA-xm7rt 2 місяці тому +1

    This will be my first paper printer. I just ordered it for €150 that seems like not alot of money for a black and whire laser printer with a toner included and a scanner and kopiër. Looking forward to it :)
    My san Andreas cheat codes will be printed nicely :D

    • @Endpoint101
      @Endpoint101  2 місяці тому +1

      That's a good price & I don't think you'll be disappointed. We love our laser printer.. The fact you can leave it for months, then turn it on without worrying the ink heads are clogged is brilliant 😊

    • @AA-xm7rt
      @AA-xm7rt 2 місяці тому +1

      @@Endpoint101 Indeed! I bought it because I figured I'd need it because I'm going to start a small repair Company at home and I'm happy to hear that you are so positive about yours. I heard good things about brother!
      Awesome video also!

  • @mick977
    @mick977 Рік тому +1

    I wasn't sure if my toner was in right didnt have the same click as yours... but it's printing so it must be. Thanks for the video.

  • @mickyd2167
    @mickyd2167 2 роки тому +8

    Absolutely brilliant video, helped me loads, thank you VERY much :)

    • @Endpoint101
      @Endpoint101  2 роки тому +1

      You're welcome! Thank you so much for letting me know!!

  • @Dahlia_sunset
    @Dahlia_sunset Рік тому

    Thanks for this review. Can i take the top off when I'm not using the scanner?

  • @fp30e
    @fp30e 2 роки тому +3

    When you do a scan, can you save the scanned image to an external stick, and will the scan be in colour (I know the printing is B&W)

    • @Endpoint101
      @Endpoint101  2 роки тому +4

      It’ll scan in colour, yes. But it can’t scan to a memory stick attached to the printer.

  • @Jeesuspelastaa
    @Jeesuspelastaa 2 роки тому +4

    Thanks for the instructions! Very clear.

  • @yrtracingteam106
    @yrtracingteam106 2 роки тому +3

    Would be handy when you also explained how to connect to wifi instead of press the button and connect

    • @AnterasPL
      @AnterasPL Рік тому +4

      For future reference:
      On printer:
      Click menu
      Go to network
      WLAN
      WPS
      Login to your router:
      Search for WPS (on my router TPlink it was under Wireless 2.4 GHz)
      Click Add Device
      Select "Press the WPS button..."
      Click connect
      Done, that should be it 😊

    • @yrtracingteam106
      @yrtracingteam106 Рік тому +1

      @@AnterasPL thx for the reply. I did find my answers back then. Again tnx for the effort 👍🏼

    • @SuperCrania
      @SuperCrania Рік тому

      Is it possible to print without WiFi ? Directly from ipad and mobile phone?

    • @yrtracingteam106
      @yrtracingteam106 Рік тому

      @@SuperCrania after a little research i found that you actually can print over bluetooth when its an option on your printer. And also with a usb cable there are several options. So wifi isn’t necessary. Google will provide you all the answers. Good luck🤞🏼

  • @ubergeraldine
    @ubergeraldine 2 роки тому +1

    Great printer if you can get it out of deep sleep or sleep mode. I have wasted so much time trying together the thing to work it is counter productive. Alas when it no longer works at all it wont be replaced.

    • @Endpoint101
      @Endpoint101  2 роки тому +2

      I’m not a fan of putting it into Sleep.. I tend to turn it off entirely between uses, and haven’t had a problem. My father in law uses sleep mode and hasn’t told me he’s had any problems.. could you maybe see if there’s a firmware update.. that might help.

    • @ubergeraldine
      @ubergeraldine 2 роки тому +2

      @@Endpoint101 having seen loads of complaints about sleep mode it seems it is supplied in deep sleep mode and the way to get it out is not clear. Not even on the Brother site! Most YT videos explain a hidden trick to do it. Far from ideal! You may want to just do a search on this dilemma! It’s a common problem! Happy printing anyways 🙂

  • @martink4975
    @martink4975 2 роки тому

    Is the right hinge(s) on the scanner lid lose? The build quality seems a little weak/cheap.

  • @tmanoharanify
    @tmanoharanify 2 роки тому +2

    thanks for video! almost made my mind up on this but wanted to check how you getting on with it ? still happy with the purchase?

    • @Endpoint101
      @Endpoint101  2 роки тому +3

      Yes, still happy with it .. well my father in-law is.. it's his, but I researched it for him :) I've got another Brother model (HL-L2350DW) which doesn't have the print/scan features, and is more compact (uses the same toner + drum tho), and couldn't be happier with it, even after 2.5yrs -- here's the unboxing of that one; ua-cam.com/video/f89ZCR7N0Og/v-deo.html

    • @tmanoharanify
      @tmanoharanify 2 роки тому +3

      @@Endpoint101 thank you. just ordered one. hopefully will get it when Amazon gets the stock back

    • @Endpoint101
      @Endpoint101  2 роки тому +2

      🤞

  • @ElectricityTaster
    @ElectricityTaster 2 місяці тому +2

    I always buy original brother toner as appreciation for not being fleeced to print at home. If the company is fair with me, I'll be fair with them.

    • @Endpoint101
      @Endpoint101  2 місяці тому +1

      That's a really good idea! You're very right!

  • @marioreds7826
    @marioreds7826 2 місяці тому

    if you want to do a duplex copy of a physical page (not from pc or smartphone), do you have to turn the page or does it do it automatically?

    • @meddylad
      @meddylad Місяць тому +1

      Its automatic

  • @ashtonwoodturnings225
    @ashtonwoodturnings225 Рік тому

    Great review, coming from a hp injet printer i don’t print very often so every time i do i have to waist 10 sheets of paper cleaning the heads, Can laser prints work after a long time, Thank you

    • @Endpoint101
      @Endpoint101  Рік тому +1

      Yes, absolutely.. it's the reason we ditched our ink jet printer & have loved the laser printer.. you can leave it for (many) months, turn it on, and it'll just work! It makes a huge difference to that printer anxiety we used to get, not knowing whether that important ticket you need can be printed or not.

  • @jacek7178
    @jacek7178 Рік тому

    Super review but as I see there is no wired connectivity (Ethernet), no wired network. Is it correct? But In the specification it is mentioned. Regards

    • @Endpoint101
      @Endpoint101  Рік тому

      Yeah, there wasn't as far as I remember (this is my father in-laws printer, which I helped him choose).. and I don't see a port for it in the video. Are you sure it's the same model you're looking at? Maybe check the Brother website for the manual which will give you all the specs/ports.

    • @jacek7178
      @jacek7178 Рік тому +1

      @@Endpoint101 Yes, I checked it. And just now somewhere I found advise the port is hidden inside the printer! Wau. Regards
      This is specs from brother, in germany but I translated this line
      Konnektivität ( CONNECTIVITY) WIRED NETWORK( =Verkabeltes Netzwerk), Wireless, USB
      Regards

    • @Endpoint101
      @Endpoint101  Рік тому +1

      @@jacek7178 Oh, interesting.. the next time I'm around there I might have a look to try and find it! Thanks for the info!!

  • @CARLOS68
    @CARLOS68 3 роки тому +1

    Thanks for the video, thinking about getting one of these and just wondered if you had tried a third party toner in it yet ?

    • @Endpoint101
      @Endpoint101  3 роки тому +3

      Yes I have, this one worked great.. amzn.to/2QPpB3k

    • @CARLOS68
      @CARLOS68 3 роки тому +3

      @@Endpoint101 brilliant thanks, think that’s made my mind up 👍

  • @topgunz1175
    @topgunz1175 Рік тому +2

    Thanks very much for the video, helped me a lot thankyou very much👍

  • @justinkatiewedding5249
    @justinkatiewedding5249 Рік тому

    Hi great video thank -how is the software for remote printing i.e from iphone /ipads etc? have you farced any problems? previously own a HP it was a pain. Also very new to the concept of laser printers for home use - is the power consumption noticeable higher i am an occasional user light office home so I don't think this would be really noticeable? Thanks again

    • @Endpoint101
      @Endpoint101  Рік тому +1

      I'm using the built-in printer options on the iPad which scans the wifi for available printers & shows it as an option when it finds it. That can sometimes take a little bit of prodding/cajoling to initially appear when you're turning it on from cold, but generally it's quite reliable. I don't use any Brother apps or anything like that, which is nice. Power consumption when turning it on is ~1kw, but that's just as it warms up and not for long (under a minute). If you don't use it often, just long-press the power button to turn it off (which is what I do). Power consumption is stated to be; printing=440w, ready=42w, sleep=6.2w, deep sleep=0.6w, off=0.03w.

  • @karinmonique4431
    @karinmonique4431 3 роки тому +3

    Thank you, I made my choice!

    • @Endpoint101
      @Endpoint101  3 роки тому +1

      Awesome! Glad it helped 🙂

  • @veeruveer
    @veeruveer 2 роки тому +2

    Thank u for the video!

    • @Endpoint101
      @Endpoint101  2 роки тому +1

      You’re welcome. Glad you found it useful.

  • @sandbuzz2944
    @sandbuzz2944 2 роки тому +1

    I normally open the rear flap to clear/pull any jammed paper - yeah still happens. Printer tech has changed but printing still not smooth, and expensive too!

    • @Endpoint101
      @Endpoint101  2 роки тому +3

      We've not had many paper jams.. once a year maybe. Having a laser printer is soooo much better than an inkjet.. those things are just awful for getting blocked nozzles!

    • @paulsz6194
      @paulsz6194 Рік тому +1

      ​@@Endpoint101moisture in tbe paper and / high humidity will increase the likelihood of jams-which is why paper curls up when coming out of the fuser unit. Less moisture in paper, then it is less likely to jam.

  • @opes9847
    @opes9847 2 роки тому +2

    Very helpful thank you.

  • @grizzlyaddams3606
    @grizzlyaddams3606 Рік тому +1

    Is this that, "brother from another mother" I keep hearing about?

  • @brufino1
    @brufino1 Рік тому

    Thanks very much - helpful and clear ✅

  • @annethroop229
    @annethroop229 Рік тому +1

    Thank you so much!

  • @az958
    @az958 Рік тому

    Any idea what the difference between this and the 2510d is?

    • @Endpoint101
      @Endpoint101  Рік тому +2

      This one is wireless, the 2510D isn't

    • @az958
      @az958 Рік тому +1

      @@Endpoint101 Ok thanks mate

  • @JulianoMolteni
    @JulianoMolteni 3 роки тому +1

    im in trouble. better this or 2710dw?

    • @Endpoint101
      @Endpoint101  3 роки тому +1

      Depends whether you need a paper feed into the scanner; if you need to scan/copy a stack of pages the L2710DW is best. If that doesn't matter to you, I'd go for the L2530DW.. it's more compact & cheaper.

    • @JulianoMolteni
      @JulianoMolteni 3 роки тому +2

      @@Endpoint101 thanks a lot mister

    • @Endpoint101
      @Endpoint101  3 роки тому +1

      Which did you decide to get?

  • @SuperCrania
    @SuperCrania Рік тому

    Can print without WiFi?? Directly from ipad or phone ??

    • @Endpoint101
      @Endpoint101  Рік тому

      How would you physically connect the ipad to the printer without wifi? I guess it might be possible with a certain lightning cable, but that’s not something I’ve heard of before.

    • @SuperCrania
      @SuperCrania Рік тому +1

      @@Endpoint101 you don't have the answer and made me a question.
      Well I have another printer model and it does print with NFC.
      👍

    • @Endpoint101
      @Endpoint101  Рік тому

      @@SuperCrania Oh interesting, that's the first I've heard of that.. looks quite neat. I don't think this model has that capability.. it's not something I remember seeing on the body of the printer anywhere.

  • @toryglen
    @toryglen 3 роки тому

    Does it have a scan only function?
    If so, can it scan in colour to the pc?

    • @Endpoint101
      @Endpoint101  3 роки тому +2

      Yes, it can just scan to the PC if you want it to. 99% sure it'd be in colour, but it's my father in laws printer, so it's not easy to check.

    • @toryglen
      @toryglen 3 роки тому +1

      @@Endpoint101 Thank you.

    • @Mehhh_was_here
      @Mehhh_was_here 3 роки тому +2

      @@Endpoint101 Yea it can scan it in colour.. but I think there should be an option where you can scan in greyscale too.. like sometimes when you scan a text and want it in b/w or greyscale... scans faster.

    • @Endpoint101
      @Endpoint101  3 роки тому +1

      Thanks for confirming! 👍

    • @mohammedalam3654
      @mohammedalam3654 Рік тому

      Does it print color or black & white ? Also if I wants to scan does the scan goes to Wi-Fi system to the laptop or I have to put wear with my laptop for scan ?

  • @nije1x
    @nije1x 2 роки тому

    Does this print in colour?

  • @TheSable123
    @TheSable123 Рік тому

    wanted to use a cable didnt show how...

  • @adbposthumus
    @adbposthumus Рік тому

    does this work in mac mini m1?

    • @lw7108
      @lw7108 Рік тому +1

      Works with an MacBook Air m1, latest OS.

  • @123norway
    @123norway 3 роки тому

    So annoying that they did not supply LAN/ethernet/RJ-45 connection on this -.-

    • @Endpoint101
      @Endpoint101  3 роки тому +1

      True, esp for a small office.. I guess for home offices that’s more of an edge case, and you could easily add a cheap wifi access point/bridge to it.

    • @Endpoint101
      @Endpoint101  3 роки тому +2

      At least it has duplex printing.. a lot of the competing brands (e.g. HP) are more expensive and don’t even do duplex, which to me is a deal breaker.

  • @moniquelauchoefat6030
    @moniquelauchoefat6030 3 роки тому

    Hoe installeer ik wifi van printer naar telefoon

    • @Endpoint101
      @Endpoint101  3 роки тому +1

      As long as the printer is on the same wifi network as your phone, you should be able to use the app's Print function to print to the printer.

  • @chikenjr
    @chikenjr Рік тому

    thanks! :D

  • @Ugushka
    @Ugushka 2 роки тому

    How to set up wifi, how to scan email? Understood nothing)))

  • @Alamaska
    @Alamaska 6 місяців тому

    Вы понимаете русский? Я пересмотрела весь интернет, и не смогла понять зачем в комплектации к нему идут три передние панели??!!! Что с ними делать? Никто не может это объяснить.

    • @Endpoint101
      @Endpoint101  6 місяців тому

      Not sure what you mean by 3 front panels, could you elaborate?

    • @Alamaska
      @Alamaska 6 місяців тому

      @@Endpoint101 I myself guessed what it was. This is a panel overlay with buttons in different languages. To me it's completely pointless. The words start and stop are written the same in all languages. only a few words were written differently. that is, I have 4 button overlays in different languages.

  • @Ffsdevgj
    @Ffsdevgj 8 днів тому +1

    Do it right… step by step…

  • @mouctarbalde2566
    @mouctarbalde2566 Рік тому

    ooooooooooooooooooooooooooooooooooooooooooh

  • @Goldmaster
    @Goldmaster Рік тому

    I hope that this doesn't prester with firmware updates like the Epson printer does. Really annoyed a Cliant who prints wirelessly.

    • @Endpoint101
      @Endpoint101  Рік тому

      It doesn't, no. I don't remember the last time I saw one.

  • @Andy-rd6cb
    @Andy-rd6cb 9 місяців тому

    ONE BIG HEADACHE is what this crap machine is.

    • @Endpoint101
      @Endpoint101  9 місяців тому

      Oh really? We've found ours has been great.. what's been the problem with yours?