Harley CV Carburetor Tuning Twincam 88
Вставка
- Опубліковано 5 жов 2024
- I highly recommend getting your service manual for your Harley Davidson (or cars) from emanualonline, at a very reasonable price using the link below with promotional code ARON22 to get 22% off!
Promotion ends August 31st 2024
shareasale.com...
This is a step by step video on tuning your Harley Twincam 88 for best performance, great gas mileage and long lifespan for your engine.
(Provided you have a high flow air cleaner and a non stock open exhaust, this set up will be perfect)
88 Sportster needle (N65C) part number : HD27094-88
Shim washer size: 3x6x0.3mm
www.ebay.co.uk...
Carb jet driver set:
www.ebay.co.uk...
This is my 03' FXDX Dyna so I'll pay close attention.
This tune is great. Thanks for this. No more popping and coughing through the air cleaner. Runs perfect. 2005 88ci
Glad it worked 👍
The same for my bike twin cam 88 2005 caughing i just shim the needle and sand paper a bit and right on perfect and thank you for the jets size and years info great my friend!
My 2000 road glide with just under 60,000 miles has never been off …carb still runs great
Great video I rebuilt my carb 2002 dyna wideglide, and tuned it following your advice it now runs like a champ 👍
Great to hear! 👍
what a hell of a good video this man made here
Thanks for the video, working on an old one trying to get it right can be tough without direction.
Good luck with your project, I’m sure it will work out fine.
@@aronsgarage834 Thanks! I'll be looking over your other videos for upgrades and tweaks.
Excellent video
Thank you
Aron, I did the mod. Including the Sportster needle.
Results; faster, smoother and it idols.
Great! Pleased it worked out.
@@aronsgarage834
I do have an interesting thing on my Carburetor, the mixture has a fill or plug making it inaccessible. I didn’t attempt to do anything to get to it. Have you seen the his on any of the ones you’ve worked on?
Yes, of course. That’s just the factory plug. At least you know that nobody messed around with your carb before. You need to drill a small hole in it (not too deep as you can easily damage the mixture screw under it.) then using a screw extractor you can easily get it out. Do count the tuns though and record it somewhere before changing the setting.
Great video, thank you. Love to, and need to, learn all about the carburator as a new Fatboy-03 rider👍
I'm waiting for winter to do the work, but I'll ask you early to prepare. I have a Akrapovic exhaust, k&n airfilter with stock housing. I plan to buy the Screamin eagle big breather, what do I need to do with the carburator to get the best performance? Thank you again for your educational videos, much love.
Thanks Kim. Congratulations on your Fatboy! Wish you many happy miles!
With regard to the screaming eagle air cleaner, if you do the simple tuning I showed in the video, you’ll be great.
I appreciate the video man. A lot of the other ones I saw on UA-cam were way too long or the video quality wasn’t as clear as yours.
Thanks for that. I appreciate it.
Thanks for video great to watch Great info. 👍
Thanks Peter. I’m glad I could help.
1A erklärt, einfach nur top
Sorry, only speak English.
@@aronsgarage834 great explained👍
Thanks 👍
Best tune up Ive seen for some time. All those hoop up kits sucked. I also noticed you replaced stock screws with Allen heads. Sweet.
Thanks Gary.
Great info.no BS stuff that works.👍
Thanks Greg.
Great and very helpfull vid. Thank you. Now my Sportster XL1200C 1999 model (screaming eagle pipes and k&n high flow filter) seems to be having a shortage of fuel. Gonna try 45 (was 42) main jet and a 180 (was 170). Should that do the trick? Or bigger jets?
Yes, you should bump up the slow jet to 45 and the main to 180. Later on it was standard anyway on the 1200 Sportster.
Great video
Thanks
Great video! I have a 2006 night train 88 cu. in. with Thunder header 2 into 1 exhaust stock CV carb. harley one step up SE211 cam and screaming eagle air intake. Stock control module also. I have the N65C needle but not sure how many washers I should install on it. can you help out a Vet?
I think you’ll be alright with 3 washers.
@@aronsgarage834 I couldn't find .3mm washers anywhere but, I did find .5mm washers. Would I be alright if i install
ed' 2 of them? that would be 1.0mm...also, will I be alright with stock 45 idle and 190 main jets?
Yes, 2x .5mm will be perfect. And yes, keep the 45 and 190
@@aronsgarage834 Update! You are correct when you say it's a beast. 2 of the .5's worked perfect. No hesitation at all even on slight acceleration. Top end pulls stronger too. Thanks again Bro. I'll keep on the lookout for any new videos you put out.
Great to hear the setup works for you too!
Hi Aron, thank you so much for this awesome video. I've got a 2001 Harley dyna 1450, with exactly the same exhausts etc as you have. I followed this video and did a carb rebuild kit on my carb and at the same time I set it up to your spec and made sure float height etc was good. Wow, mate, I thought my bike was good before but now it moves like shit off a shovel!! I certainly reaped the benefits of my labour. Thank you again dude. Ps, are you based in US or UK? Peace and love from England. Grant. 🙏🏻
Hey bud, I’m glad the setting worked out for you! You’ll notice that even the consumption will be great, too. I’m based in the UK (Milton Keynes) Might see you on the road in the spring 😎
@@aronsgarage834 ah cool, ya know what that would be pretty cool actually man. I'm pretty sure we could make that happen. Cheers!
Absolutely! Let me how the bike runs in the spring
@@aronsgarage834 will do mate. Tempted to go to a 46 slow jet as I'm at around 3 and a quarter turns out on the fuel mix screw. I tried just under 3 but it had a couple of moments of hesitation (carb sneezes),
But soon as I hit 3 and a quarter it ran beautifully
I’ve been at 3 and 3 quarters for a while now and runs even better. Better cold idling/running and same performance. Seem to remember when I tried it with 46 it was not as good. I clearly remember though running it with 48 was really bad. Was running way too rich (sluggish) even with pilot being half a turn out only.
Thank you for making this video. Great stuff! I did this to my 2000 soft tail heritage and it runs great now. No more sneezing or coughing. The only issue I have now is that it idles a little to high for my liking. What would you think the fix would be for that? I think the only modifications I have are a high flow air cleaner and straight pipes.
Thanks for the positive feedback. It’s just a matter of bringing it down with the idle screw. Have you tried that? It should run around 850 idling cold and 1000 warmed up.
Twin Cam motors are supposed to have a slightly higher idle speed than older, EVO, Shovel motors. The beloved
"potato potato" idle is for older motors. Bringing a Twin Cam idle down very low could cause engine damage, due to low oil pressure at idle.
Great video and very informative. I own a 1995 XLH1200 Sportster and I'm about to replace the jet needle to a N65C, however I'm not sure what the stock slow/idle jet size should be from factory. In my official Harley parts catalogue it states part No: 27281-92 but doesn't state the size. Likewise with the main jet, no size given. Can you please advise?
Thanks for the feedback. I pulled some data, looks like yours had 42 slow and 170-185 main depending on model. I would try 42 and 180 combo, but if you’re over 4 turns out with the mixture screw (when running properly) you might want to bump it up to 45.
Thanks for your response and information. Regarding the needle, do you suggest I use the 3 x 6 x 0.3 shims too and how many?
Also, where is the best place to source the jets you mentioned, please?
I think 2 of those shims would be enough for you. You can get jets from CV Performance (great quality) or genuine Keihin.
Sorry, it should read mixture screw 4 and 3/4 turns out.
I ended up turning the mixture screw 5.5 turns out to achieve a satisfactory outcome.
Hi! Great video, thanks!!!
I ask for advice. The TC88 engine, instal Andrews TW 26. Arlen Ness air filter stage 1. Direct-flow exhaust system V&H short shot. How do I adjust the carburetor? Which jets should I install?
Great video, curious as to whether or not this setup would be optimal with a screamin eagle 95 kit and 203 cams?
Thanks. I’m sure you’d need a bit more juice, bigger jets, needle maybe lifted even more. I’ve never experimented with that so I’m only guessing though.
Need a video of the mixture screw adjustment while the carb is on your bike! Super helpful stuff man. I have a 2000 fxdx so this is perfect!
I appreciate that! Yes, I actually made the mixture setting video back in the fall but material didn’t turn out to be good so I didn’t edit and upload. Will do it in the spring. Bikes’s still in winter hibernation 🙂
Turn the mixture screw until lightly seated. Mark the tube with a sharpie in relationship to the screwdriver blade seated flat side. Starting point one & a half turn out. Start the bike. Let it warm up all the way to operating temperature. Give it throttle. Let it settle. Turn out a half turn at a time. Let it settle. Hook up or look at your tach! Once the motor starts to idle rough turn it back until it smooths . Then turn it back again a half turn & you should be set usually. You may have to reset your idle speed. 1050 is about right depending on your exhaust and cam!
@ 3:52 you say make sure it goes in the right way. Which is the right way?
The end with bigger diameter bore goes in and will be sticking out in the carb throat
I can show you years of statistics on my Harley with fuels an oils, oil fortifies! I found something in 1989 at Portland sportsman's show. I have friend that manager of suburban propane going conversion.with Dyno tuner. We measured before an after on this product an was shocked by performance. So I've kept records since that 1989 timeline. I taught math in school with father doing all school district bus maintenance, so this study I treated us both! Leave comments if you want more information on cooler running, more hp, better wear protection!
Hi, i can't find those needle shims in the US. Thx! Great video!
Thanks! I checked the link I put in description and unfortunately it expired but I did find the same seller I used in the UK. Click on it and see if they offer international shipping. I will also contact them to find out.
www.ebay.co.uk/itm/224326415431?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ue39x-ssq2a&sssrc=2349624&ssuid=PaL4YB6IRGm&var=523117972322&widget_ver=artemis&media=COPY
Very informative, thank you. I have a 94 Dyna 80 ci. Screamin Eagle pipes, high flow air cleaner. Would this set up work on my Evo?
Well, I have never tuned an Evo so this is only my best assumption: I think it could work really well, but I would use your stock jets. I believe 42 slow and 165 main?
Is it really 3 turns out, I’ve read somewhere that it’s more like 2 turns or 2 & 1/8…?? How many turns did it come out after you tune it??
Mine is 3 & 1/2 currently.
1 & 3/4 and 2 turns out were factory standard. These bikes were set too lean to start with. Then like most of us, we put high flow air and open exhaust on, so need to adjust.
The 3 - 3 & 1/2 sweet spot applies only if you’ve done those small mods and your carb has stock slow jet (45).
I have a 2005 dyna wide glide. I put an aftermarket air breather on and now my bike runs like crap. Do i apply the same methods here? Do i need bigger jets and needles? Please help!
You don’t have to get bigger jets. Your stock one are 45 and 190. And you only need a different needle if you want more power. You just need to adjust the slow jet for now. Count the number of turns it’s set in now, (by screwing it all the way until it lightly seats as you’re counting. Assuming your stock setting was around 1 3/4 turns, set it 3 turns out. See how it runs and perform the fine tuning method I show in my other video (while bike is idling)
Let me know how you get on.
@@aronsgarage834 I'm actually having a hard time getting that screw to move. I'll try letting it warm up a little and try it then
Yeah, you can try it that way. If no luck, you might have to take the carb off and soak it with wd40.
Can you tell anything about when you make a video of your catchcan? Tnx! Greetings Peter
Hi Peter, Funny you should ask, I’m about to do that one. I ordered in the parts for it. I’m just waiting for the rubber end plug/cap to arrive. Hopefully next week I can do it.
@@aronsgarage834 tnx for responding! I’see forward to it. Greetings
Sir, you mentioned in your video that you used a jet needle for a Sportster motorcycle that did not have an accelerator pump, but I was wondering if you used it in a non-sportster bike. I have a 2000 HD Heritage Springer, and I am wondering if I can use that particular needle, or stick to a specific needle for a Springer with a CV carb (with accelerator pump). Thx.
Hi Carlos, In the video I was showing how to tune a twincam 88 carb, any twincam between 1999-2006, so including yours. Yes, go ahead and put the 88 sportster needle in your carb with the shim washers I mentioned and your bike will run like a beast. Of course I assume your have a high flow air cleaner and open exhaust.
@@aronsgarage834 Hi, great video! Thank you for your content and explanations. What configuration do you think would be good for the HP of a '98 FLHT 1340 with supertrapp mufflers with about 10/12 discs and open cap, big sucker arlen ness, andrews e27 cam and Dynatek 2000i ignition module?
Thanks for your attention.
Thanks for your feedback! Not really sure, but I would probably try the setup I showed in the video at first instance, and see how it runs.
@@aronsgarage834 i don't have a n65c needle, but have a CV performance needle, N72S needle and N86E needle. My configuration now is: 48 pilot jet and and 185/ or 190 (i'm not sure) main jet, CV performance needle and aorun 3 and 1/4 turn mix screw.
the bike seems to be running well, but how is it possible that every now and then I hear some detonation in the release of gas and the spark plugs are between white and greyish in colour? how can it be lean with a minimum of 48 and 3 and a quarter turns of the adjustment screw? ps: the dynatek setting at the third advance curve (stock motor) and single fire. I tried to put more aggressive advance curves, but the detonations increase. I can't give myself an explanation.
It shouldn’t be lean with that setting. Have you checked float level, whether or not the slow circuit is blocked, or leak around the manifold?
Need some advice .My 2003carb fat boy qent in on a dyno to be set up and pass the london ULEZ law ( lowering Nox level ) To do that it seems the bike has to run a bit rich on the mixture. Well it passed and it runs ok and starts and ticks over ,but the plugs are fairly black .The dyno guy says thats ok so long as the bike runs ok .I cant get my head round that as owning bikes and cars since 1958 i always looked for a lighter colour on plugs .Not sure whether to try tuning the mix screw in for a leaner setting
.??
Yes, it’s supposed to look brown or dark grey. If it’s black, you’ll end up with a lot of carbon build up on the pistons, which is not good.
Yes, try to lean it a little with the mixture screw.
I made a video on how to fine tune while idling. It might be helpful.
Do you need to shim the CV Performance needles also? Great video.
Thanks. Not sure as I didn’t experiment with those needles, but since it’s a performance needle, you shouldn’t need any shims.
@@aronsgarage834 I checked their website. No shims required, just drop in and run it.
Yeah, that’s what I thought.
@@aronsgarage834 I've got 2 on order for both my bikes.
Hello Aron,
Nice video👍🏻.
I have a problem with mij dyna tc 1999.
My fuel consumption is terrible.
It was 1 to 18, 1 liter on 18km
Nou it's 1 to 8 😢😢
I completely cleaned the carburateur and refurbished the carb.
Do you have an idea what it can be.
Hoop to hear from you.
Kind regards,
Mike
Hi Mike, Mine is a 1999 Dyna too! Did you install the needle jet the right way? Goes back in either way and can cause issues with consumption. Float level all ok? Pilot screw adjusted? What jets and needle are you running?
@aronsgarage834
45 and 190.
This problem started 4 weeks ago.
I have no idea why??
It doesn't smell like fuel, no black smock out of the exhaust.
Did you double check all those things I mentioned?
Hi Aron, yes I did.
I have bin driving to day and still 1 to 8
Then I would check a few other things: tire pressure, brakes, wheels (to make sure they aren’t dragging), air cleaner, choke/ enrichener, diaphragm on the slide, engine oil level, exhaust, any gas leak.
EXCELLENT video mate, will this suit a 80 cube evo 94 dyna superglide? cv40 carb?
Thanks! I’m not sure about the Evo as I have never tuned one. I would leave your jets stock ( I believe 42slow and 165main?) and throw in the 88 needle without the shims. Or maybe 1x 0.3mm washer and see how it runs.
@@aronsgarage834 thank you for the fast reply, I will use your other videos foe cleaning the carb etc, great videos Aaron thank you very much!
Very welcome, Evan. I’m happy to help my fellow bikers!
What pipes are on the bike? Air filter? A 45 is good no washer under the needle!
Hi! Awesome video. I'm curious, if this setup or tuning would be the same for a 88" Twin Cam with a stage 2. I've recently installed the Feuling 525 Camchest kit in my '02 FXDX and I'm thinking I could get better performance if I was able to more accurately tune it. I'm not confident it's tuned right, but if I recall, Cams will drastically change the tune needed for the carb. Any suggestions? Got a 2 into 1 Thunderheader, K&N Air Cleaner, and the 525 Cams.
Thanks!
I’m not entirely sure as I’ve never tuned Twincam with stage one, but I would give it a shot with this setting. If the mixture turns out to be a but weak then you could always go up in slow jet (46 or 48 even)
Soooo you just said towards the end of this video you don't have any popping or sneeze or cough iam curious to know what would even cause that to happen since that is what my bike is currently doing when i accelerate i get a pop sound or cough sound out of my carb and air cleaner.... what could be the issue can you please help me? lol
That’s most likely because it’s too lean. What set up do you have in your carb? How long has it been doing it? If only recently, it may have developed an air leak around the manifold or vacuum hose or around the air-cleaner. It could also be a clogged slow jet in your carb..
@@aronsgarage834 my carburetor is a cv carburetor also I just recently changed out the Jetts and I have the air fuel screw turned out 1 5/8 and it does sound like I have a rear manifold leak it does this crackling sputter sound from the rear head.
Cool. Let me know if you’ve found the leak
@@aronsgarage834 yes I did find the leak it is off of the rear head. One of the exhaust manifold gasket studs busted so now that's my situation I like working on my own bike but sometimes I get tired of not being able to find help lol anyway thank you for responding
That’s great, I’m glad you found it. Yeah, that’s what I like about our “Harley community” that we stick together and help each other out. Have a good one
In your opinion, how should the progression of increasing or decreasing jets and needles take place? For example, should you exhaust all available increases in jets before you start changing needles? Or should you first address the needle size first? For example, let's say someone has a CV carb with a 45 pilot and 185 main. Should that person go directly to the jet needle before addressing the main jets or pilot jets? My question is kind of like the question of: what comes first, the egg or the chicken?
I would go to the jet needle first because the profile of the needle can effect the off idle to 1/4 too (if you’re swapping it for the sportster 88 needle especially as the straight part is slimmer), as well as of course affecting mid range for the main part. Then you will see if the slow (up to 1/4 throttle) is enough, then lastly the main ( from 3/4 of your throttle).
45/185 or 190 jets are the standard for jetting usually depending on altitude! Because of emissions the needle dictates your fuel flow from the factory is lean. So the needle swap is where you go to & tune it all together like a EFI bike would be!!
190 and 45 wasnt stock on all 88’s some were jetted different depending on what bike you have
You are right. My 99 Superglide was fitted with 42 slow and 185 main. I understand most 88s did come with 45/190 after 2000, though. Frankly, 42 was really lean especially with high flow air cleaner and open pipes.
In my neck of the woods 48 slow 2000s . What’s your opinion?
Don’t use the 42. I have it on mine currently. The carb is new and I was gonna see how it performed going that low. Bad. It’s not even rideable. I almost dumped it from the lack of power making city turns. practically stalling it in a few turns. I’m putting 45 in and tuning from there. Top end is good on mine with the 170 main jet. I might try increasing it after I get the idle mixtures set good. The needle is stock but I might try that 88 sportster needle you were talking about.
How do your replace the Diafram
You can pull it out of the piston and using a bit of soapy water you slide the new one back in place while giving it a little stretch. I did it a couple of years ago and ran it with no problem, however I decided to replace the slide as a unit because I learned that replacing only the diagram is not really recommended by factory. It may not function 100%.
Thanks for the info, my question is, I bumped my tc88 to 95"" would still use the #45 pilot jet, or go up to #46-#48 have aftermarket intake and exhaust on the bike and a N65C needle/shims on my table
That’s likely to be a 48, however it is only my assumption. I would put that in and do the fine tuning with the pilot screw at idle. Should fall between 1.5 and 2.5 turns out with the 48. Let me know how it turns out!
@@aronsgarage834 Thanks! maybe tomorrow.
How many shims would suggest?
I would go with 3 shims.
Hey Aron, just a little follow up, This bike did already have a #48 in it, I installed the N65C jet with 3 shims, air screw turned out 2 turns and I am very pleased with the results. The bike starts right up, warms up quicker, pulls strong, and does not shake as much at idle. I am going to tune on the air screw a little to get a little better throttle response on the bottom. but all in all I am thrilled, Thank you!
Whats the best tune on a evolution
Hi,
Which setup would you recommend for a stock '98 XL1200C from the states with 68 hp? Is there any tuning necessary?
greets from Germany :)
Hi Tom, Hope you still got good riding weather in Germany :). if everything is stock I wouldn’t touch it. If you have a high flow air cleaner and open exhaust you could pretty much do the same set up. Maybe reduce the number of washers under the jet needle to 1 or 2. It’s just my assumption though as I have yet to tune a 1200.
@@aronsgarage834 it's getting cold here slowly, but sunny! what would change if everything is stock, but I work with 1-2 washers?
Hello there, great video, I just purchased 2006 harley sportster 1200 carburetor same as yours, how do you do the oil separately for the carburetor? I love to do that in my bike. I just did deep clean in my carburetor. And I like they way yours look super clean, do you have any video for that? Thank you 😊
Hi, Thanks! 1200 Sportster is a great choice!
What do you mean about doing oil separately for the carb?
Yeah, mine looks very clean. I did put it through my ultrasonic cleaner, but a carb cleaner spray will do the trick inside and outside. :)
@@aronsgarage834 I founded. Is the one you have in your bike catch can air oil separate
Thank you
@@Ruffles206 oh you meant the crankcase vent. Yes, it now goes into a catch can I made. I will make a video on how to make one in the future.
I order this kit for my sportster 1200 custom Drag Specialties Breather Kit For Harley Sportster 1991-2022.I start doing today and I found out that the plastic cover the one hold the carburetor that’s doesn’t fit with kit, you’re air cleaner is smaller. Do you know or found a video how this kit works?
@@aronsgarage834 how does your catch can vent you have a rubber cap on your exit side of catch can and breather vent hose going to catch can entrance ? or am i just Stupid?
It would help me if you could give me a purchase link for the part whose hole was measured as 2.8 mm in the video (on which you wound the 190 main Jet)
Unfortunately I can’t find a good link, but if you search for Harley Davidson CV carburetor keihin needle jet, you should be able to find it. Or go to your local bike parts store and they should be able to look it up for you.
@@aronsgarage834 I found a Harley Davidson CV carburetor keihin needle beam, but I can't see the 2.8mm part separately!
The needle jet is the part with a 2.8mm hole. It’s one part
@@aronsgarage834 I got a 130mm long sliding spring in the set. Do you know an article number that gives the requested 143-146 mm? The other parts are there, only this is different.
The part number I got is 27162-89. I have noticed though, they still come in different lengths sometimes. Even the dealer couldn’t verify why that was.. Hope it helps
Is it possible to swap out the jet needle for the sportster 88 needle without removing the diaphragm with the carb in place ? ( ideally just by lifting the needle up from/through the air cleaner inlet with fine surgical type pliers )
You can’t do it through the inlet but you can do it with the carb in place. Just lift the tank up and support it with a block of wood (posted a 2min video on this before) take the top cover off (4 screws), take out the spring and lift out the slide with the needle and retainer in there. Quick easy job.
@@aronsgarage834 Excellent, yes that is exactly what I meant ,sorry about the confused way I worded the question. Keep up the good work.
No!!
Just pull the carb out of the manifold. Lossen the choke cable. Leaving the throttle cables on it! Being it's a used bike I'd remove it anyway!!
Evening, great video.. I have a question about the slow jet (pilot jet). I have a 05-night train with stock exhaust and stock air intake. Main jet is 190, and the pilot jet is 45 stocked. I am going to install an SS air intake. I am going to leave the stock exhaust and the main jet will stay the same. With a new pilot jet, I was going to upgrade to a 48 instead of the 46 due to greater air going into the Twin Cam. What is your take on that? Thank you for your time.
Hi Brad, the 48 and is too big. You’d have a sluggish performance being too rich. I’ve tried it before. 46 is ok but honestly you’re good with stock 45. Just adjust the pilot screw after installing the air cleaner. Give it an extra quarter or half turn out. Or better yet, perform a fine tuning while bike idling and you’ll find the sweet spot. I’m actually in the process of uploading a video on that.
@Aron's Garage So you mean adjust the mix screw since you can't adjust the pilot jet..
Yes. Do check and record the setting first, though by turning it in until it gently seats counting the turns. This way you can always go back to that starting point in case you lose track of turns while fine tuning it. Mine is at 3 and 1/4 out with high flow air cleaner and modified stock pipes/ or screaming eagle.(of course I have the thinner needle set up too as shown in my video)
@Aron's Garage I bought the cv Performance kit from the cvo website.. So, I will be replacing the needle and adding the t tall mixture screw .
Got you. You should be all set then.
Great video. Do you recommend the stock 45/190 with a twin cam 88 with mild cams (509g S&S). Thank you!
Thanks. Not entirely sure because you have different cams in there but would definitely be my first choice of set up. Try it and see how it runs..
One last question. Finding the correct washers is difficult in the USA. I assume the id of the washer needs to be very close to the needle diameter? So far the washers I’ve found are loose.
Yes, should be quite close. If you are struggling to find the right size, I’ll send you some. Send me a message on Facebook. Aron vetesi
@@aronsgarage834 Aron, that would be awesome. But I’m in the USA. I can Venmo or PayPal in advance for postage if you are still willing.
@@gnoub51 send me a message on Facebook and we’ll get it sorted. Aron Vetesi
Thank you for the very good videos Aron , can you please tell me where you bought the slide ? Thanks .
You’re most welcome! You can get it from BigBoar if you’re in the UK or Ebay. Usually around £35.
3ㅡ3
Sir, what do you call that shorty screwdriver with the reddish round handle? Can I ask where you got it?
Sure, Carlos. It’s called a carb jet driver set and JMP is the brand. I bought it on Ebay. I put the link in the description of the video.
Where do you get the 003 shims? Haven't been able to find them.
Ebay. If you type in shim washers classic cars/ motorcycles it should come up. I think I put a link in the description too. Let me know if you can’t find it.
I was pondering rebuilding my carb because I get a sneeze at intersections once in awhile, but I'm currently getting almost the exact same gas mileage as you. Maybe I should just live with a sneeze once in awhile 🤧. I don't want to screw up that mileage.
It might be a little lean then. Often times, just a 1/8 or 1/4 of a turn out on the mixture screw does the trick. Before you do that though, make sure you count the number of turns in until it gently seats so that you can always go back to that setting if you’re not happy with consumption or how it’s running.
But if the sneezing is not bothering you, and otherwise running well, you can leave it.
I would still check the spark plugs, though to make sure it’s not too lean, because that would make the engine run hotter and wear out more quickly.
Where did you get that red Thumb Drive from?
Ebay. Carb jet driver set. I put link in description.
What bolts are you using to secure the top? They don't appear to be stock.
4 mm allen bolts. I find it easier with them. Plus it’s easy to carry an allen key in the pocket or toolbag in case you run into an issue on the road.
@@aronsgarage834 Thank you for your response! do you happen to know the length of the bolts?
Sure. It’s 16mm for the cover, 14mm for the float bowl and 8mm for the accelerator pump.
@@aronsgarage834 Thank you so much for your help, and for this incredible video. I appreciate the effort you put into the video and it's been incredibly helpful.
Thanks very much for your positive feedback.
Do you have a stock or aftermarket cam?
Stock cam.
The link you put on here won't ship to the U.S. is there any other options for me to get these shim washers? Thanks, Aron.
What state are you in, Rick?
@@aronsgarage834 I'm in Missouri. That was a Great video you made, I'm trying to do mine EXACTLY like you did it in the video. Mine won't idle down after riding it while hot, so I assume someone has drilled out the slide. Thanks Again
@@1rottenrat yeah, measure the port hole on slide. You might need a new one if drilled. It’s also worth getting a brand new good quality 45 slow jet (in case it was messed about too, and got enlarged) In regards to the washers, if there isn’t on Ebay US, call up hobby model shops, they should have these small shims. If not, let me know before Friday. We’ll be travelling to Vegas and I could just post a few to you from there.
@@aronsgarage834 I bought a new slide and a set of new jets just like you described in the video. Thanks for responding so quickly. I greatly appreciate your help on this, again the video was EXCELLENT.! If I can't find them I would gladly send you money for them and the postage. Thanks again.
@@1rottenrat Super! I’m glad it’s helpful. Yeah, let me know if you can’t find them, happy to help.
Væry væll
30만원 ㅡ
Whats the best tune on a evolution