W201 Carbon fiber interior - Installation - STEVS Design

Поділитися
Вставка
  • Опубліковано 8 вер 2024
  • Carbon fiber interior trim kit installation for the W201. This video shows the installation of the 2.3 16v version in a Satin finish.
    Installation notes:
    - Clean all original interior pieces to be fitted with the trim pieces with paper towel and a cleaner. Isopropyl/water mix, window cleaner, soapy water can all work.
    - Test align carbon fiber pieces to ensure correct fitment, before sticking on.
    - When applying, be sure to remove all of the adhesive backing of the piece. Some may come off in more than one piece.
    - Once aligned and applied, apply gentle pressure across the trim (use a microfiber towel) to ensure it is well installed.
    - If there is any trimming needed, you can sand the pieces with 180 grit sand paper, or a fine diamond file.
    Maintenance & Care:
    To clean the carbon fiber trim, use a microfiber towel damp with water or blue Windex. Do not use any harsh solvent cleaners as it will destroy the finish.
    For more information and to purchase a STEVS Design carbon fiber trim kit for your W201, please visit:
    stevs.ca/colle...
    We can make a kit for every W201 specification. Please contact us for more details. info@stevs.ca
    Thank you.

КОМЕНТАРІ • 18

  • @BRUKZ
    @BRUKZ 3 роки тому +1

    Amazing just what I was looking for thank you

  • @artedonthebeat2749
    @artedonthebeat2749 2 роки тому

    Thats so sick also 5 speed manual mental

  • @gregmcquaid3239
    @gregmcquaid3239 Рік тому +2

    Has the dash been wrapped or flocked, looks great and would lie to know, cheers

  • @mirrorbg
    @mirrorbg 2 роки тому +1

    Преди 20 години, правихме това с фолио 😊

  • @Devtac-
    @Devtac- 3 місяці тому

    any plans to make replacement carbon fiber parts or just stick on covers?

  • @buza972
    @buza972 5 місяців тому

    Thats amazing, where is the air vent knob though?

  • @Unc_Talks
    @Unc_Talks Рік тому +1

    Please do a W124 / C124 version.

  • @Masheka54
    @Masheka54 2 роки тому +1

    Super!

  • @waldemarkrawczewski3858
    @waldemarkrawczewski3858 Рік тому

    Brawo . Super 👍🏆🏆🏆😍😎👌❤️

  • @adrianogatti7328
    @adrianogatti7328 Рік тому

    Hello, I have these 3 vdo tools from w201 16v, I would like to mount them on the 2.0 Can you tell me how the pins of the instruments are connected? For examples the voltmeter pin"1" is for? Pin "2"? Pin "3"? Same for the stopwatch?

  • @jahongirtv2
    @jahongirtv2 2 роки тому

    👍👍👍

  • @theclicker
    @theclicker 8 місяців тому +1

    those are just stickers.

  • @sniperoffools9204
    @sniperoffools9204 2 роки тому

    how can l get this carbon fiber plz

  • @Kovig-sn2sz2mf6c
    @Kovig-sn2sz2mf6c 2 роки тому +1

    Где купить

  • @ContrastemandelIntertest
    @ContrastemandelIntertest 2 роки тому +2

    Pues quedaba mejor en zebrano

  • @murzproject
    @murzproject 2 роки тому +1

    Спасибо блеванул от души.

  • @user-ox6no7se5z
    @user-ox6no7se5z 18 днів тому

    No it's W201 that's w124

  • @edmondhickey
    @edmondhickey 5 місяців тому

    why?😂😊