Try doing this next time and see if it is faster. Put all the spacers back on the wheels except the very outer ones and drop the load wheels in the outrigger. Then put the both axles halfway through the pivot plate on the inside and add the outside washers for that side, then get them started in the wheels and then push the pivot plate into place. Add the last 2 washers and line up your roll pin holes and then put on the last pivot plate then roll pins and done. Don't need all that grease to hold the washers in place. Or you could just order the wheels with shoulders already there.
I appreciate the video. Way more grease than you need. I will try jacking up the truck a little higher to get the roll pin side pivot plate in. I have been trying to line them up with the jack. Your way seems easier. What @stephenshook says is what I do.
Hi got a rc5500 with no start up. Display turns on and immediately shows wrench light. Battery meter displays but no code is displayed nor does it give me access to service. Push arrows any direction gives me nothing on display so I have no code to work with. Unit has info link which I bypassed. I've checked all fuaes and swapped relays at distribution board. I have also swap the display module getting same issues. I'm leaning towards a software issue but don't have a laptop with firmware so wanted to get any advice before I gotta place a service call. Thanks for any help.
Thanks for watching! Not sure if there is an online store but any forklift dealer can get them for you. You just need your part number or know what load wheel size you have 🍻
You just made my life easier! Thank you!
You’re welcome!
Try doing this next time and see if it is faster. Put all the spacers back on the wheels except the very outer ones and drop the load wheels in the outrigger. Then put the both axles halfway through the pivot plate on the inside and add the outside washers for that side, then get them started in the wheels and then push the pivot plate into place. Add the last 2 washers and line up your roll pin holes and then put on the last pivot plate then roll pins and done. Don't need all that grease to hold the washers in place. Or you could just order the wheels with shoulders already there.
I appreciate the video. Way more grease than you need. I will try jacking up the truck a little higher to get the roll pin side pivot plate in. I have been trying to line them up with the jack. Your way seems easier. What @stephenshook says is what I do.
Thanks for watching!
Hi got a rc5500 with no start up. Display turns on and immediately shows wrench light. Battery meter displays but no code is displayed nor does it give me access to service. Push arrows any direction gives me nothing on display so I have no code to work with. Unit has info link which I bypassed. I've checked all fuaes and swapped relays at distribution board. I have also swap the display module getting same issues. I'm leaning towards a software issue but don't have a laptop with firmware so wanted to get any advice before I gotta place a service call. Thanks for any help.
thanks bro.
Thanks for watching! I really appreciate when someone takes the time out of their day to comment!
Great video, step by step! Any idea where online I can order load wheels for a RR5210-35? Looking for complete with bearings.
Thanks for watching! Not sure if there is an online store but any forklift dealer can get them for you. You just need your part number or know what load wheel size you have 🍻
Keren broo👍