If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. Did you know, you can now support World of Wayne by joining the channel membership program at bit.ly/WowMembership and get exclusive features for UA-cam. Alternatively, you could join my Patreon for $1 and still get access to member live streams and behind the scene news. My patreon channel can be found at www.patreon.com/worldofwayne . Thank you all for your continued support. I really appreciate it
Hi Wayne, If you freeze the footage at 21:42 , it shows a large panel gap that doesn't look right. It's about 2 inches above your right Thumb. Just an observation.
@@WorldofWayneUK The lower moulding has a recessed edge for butt contact which leads me to believe it should be a tighter fitting. The Tumbler in original TV advert does show this as a sort of seam joint but perhaps this is a poor reference!
Hey there Wayne, Enjoy your videos greatly! I have a heads up for you. In stage 93 at the 17:30 minute mark you installed the part with the 2 silver bars onto that large black panel, the lever you installed earlier should come up into the CENTER section of the part at 17:30, NOT in the sliding area with the AIM screw. I think this will hinder the full operation of that part in the future. Thanks again!
Finally, it feels like we’re - OK, you’re - starts to get somewhere with this build! It was starting to feel a bit interminable… Also, is it just me or does their suggested cable management feel a bit basic? With the ways all the parts seem to be designed to move, there could be trouble further down the line…
Hi Wayne, do you still have a videos for build the battleship Bismarck? I have the hachette issues and had to take a break for quiet some time due to ill health. On issue 87 and wanna build along with your videos again.
This was the 1st build I tried to get and they discontinued it just weeks before I saw it. This is the only Batmobile I thought was equal to or better than the '66. Ungodly expensive on EBay
This just started coming out in my country, currently about to release part 3 iirc. Compared to other options, like the hot toys 1:6 replica, is this worth it? doing the math, this offering is almost twice as expensive.
Yes as this is where they test the rear aerofoils and put it simply what a terrible disaster that is it just doesn’t work as it should…. Literally no upward movement or much down and on mine only one side works… really annoying so will have to try and check this before doing anything else…
@ after a lot fiddling/ fettling managed to get some movement but its like tuning a piano to get it to respond … its the right side as you look at the front of the car that seems to suffer due to the lever plate being weaker that side and doesn’t seem to get full movement… I did also add some white grease to the plate mechanism to assist it….I think it can be improved upon though….
![Eccentric by Generator [FULL ALBUM] AI Gothic Symphonic Progressive Metal | 2024](http://i.ytimg.com/vi/2Kub5g7i5lM/mqdefault.jpg)
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. Did you know, you can now support World of Wayne by joining the channel membership program at bit.ly/WowMembership and get exclusive features for UA-cam. Alternatively, you could join my Patreon for $1 and still get access to member live streams and behind the scene news. My patreon channel can be found at www.patreon.com/worldofwayne . Thank you all for your continued support. I really appreciate it
Lol
Looking great with so many moving parts.
Nice work Wayne 👍🏻
Hi Wayne, If you freeze the footage at 21:42 , it shows a large panel gap that doesn't look right. It's about 2 inches above your right Thumb. Just an observation.
Yep. It's meant to be there. Itsnon the other side too
@@WorldofWayneUK The lower moulding has a recessed edge for butt contact which leads me to believe it should be a tighter fitting. The Tumbler in original TV advert does show this as a sort of seam joint but perhaps this is a poor reference!
At last stuff going together ,looking impressive
Starting to wish i got this now, looking forward to the Dalek though
Dalek me too will you be getting Darth Vader by any chance👌
Hey there Wayne, Enjoy your videos greatly! I have a heads up for you. In stage 93 at the 17:30 minute mark you installed the part with the 2 silver bars onto that large black panel, the lever you installed earlier should come up into the CENTER section of the part at 17:30, NOT in the sliding area with the AIM screw. I think this will hinder the full operation of that part in the future. Thanks again!
Thanks for the spot. I've corrected it
Finally, it feels like we’re - OK, you’re - starts to get somewhere with this build! It was starting to feel a bit interminable…
Also, is it just me or does their suggested cable management feel a bit basic? With the ways all the parts seem to be designed to move, there could be trouble further down the line…
Shame this one isn't available anymore, and was apparently a frustrating build, as it looks like it would make for an awesome model in the end.
Hi Wayne, do you still have a videos for build the battleship Bismarck? I have the hachette issues and had to take a break for quiet some time due to ill health. On issue 87 and wanna build along with your videos again.
Bit surprised Wayne didn't put it over his head in the end
This was the 1st build I tried to get and they discontinued it just weeks before I saw it. This is the only Batmobile I thought was equal to or better than the '66. Ungodly expensive on EBay
Awesome! I have it all and have not built a single stage yet! 😆
Wayne it looks like you have put the lever 91c in the wrong hole. It should be in the middle hole.
This just started coming out in my country, currently about to release part 3 iirc. Compared to other options, like the hot toys 1:6 replica, is this worth it? doing the math, this offering is almost twice as expensive.
It's certainly better looking the then hot toys one
Issue 94 the turntable interesting wonder that that other round spinning bit we got a while ago was then?
I’m surprised those parts were only held together with 3 screws each side seems like there should’ve been more than that
Wow. Looking great, but you're totally right, it's a slow burn.
Great vid and build 🙏🇦🇺💞💪👍🍺🐕🐕
Need a scale size of the baterminator to go in it lol
Great video! Well edited. Clear and precise for anyone to follow 👏🏼👍🏼
Shouldn’t you have done issue 94?
That's a good point. I.think I may be missing that. Will get in touch with them
Yes as this is where they test the rear aerofoils and put it simply what a terrible disaster that is it just doesn’t work as it should…. Literally no upward movement or much down and on mine only one side works… really annoying so will have to try and check this before doing anything else…
@@nigelobject I already took the mechanics out of mine so I know they wont work lol
@ after a lot fiddling/ fettling managed to get some movement but its like tuning a piano to get it to respond … its the right side as you look at the front of the car that seems to suffer due to the lever plate being weaker that side and doesn’t seem to get full movement… I did also add some white grease to the plate mechanism to assist it….I think it can be improved upon though….
What happened to Part 88?
He already done that, he had broken parts from 87 last time. See part 83-88 video
It's was done in the last pack
Not making any judgement on you Wayne
But out of all the hachette partworks build this one is taking the longest to get anywhere with
Definitely
The quality control does not appear to be to good