PITCH of a roof may be entered either by degree or inch per foot. Span of roof should be divided in half and entered as RUN, RISE is the height of the ridge from the wall plate. Hope this helps! If you want add'l help, we have live CHAT on our website or email techsupport at calculated.
Am looking forward to making the most of this calculator but I think you need to slow down on the tutorial and make it longer. I can't see how one is supposed to get properly to grip with this tool in 4 min 51. I didn't have instructions with mine either. Anyway thanks for a good tool in anticipation.
Hi Alistair - I understand it's a lot to absorb and this overview can be quite overwhelming. I would suggest viewing the short 2 min demos we created to learn the most used functions of the tool and to email us for a Users Guide, that we would be happy to provide. techsupport@calculated.com
Many thanks for your prompt reply, I will email you. I have watched a few other videos and have worked out how to find the common rafter length which is what I was most after. We will build JerUSAlem..
Apologies for this late reply. All of our devices come with user guides. As the CMP model guide is very large, we include a pocket reference guide located in the back pocket of the unit for on-the-go reference. Full users guide in multi language & metric is available on our website. Hope that helps and you are doing well with learning the product.
Just enter your elevation as a decimal such as 523.45 press CONV key then the FEET key three times and it displays 523 feet 5 inches and 3/8. Or if you want answer just in inches, enter 523.45 FEET key then CONV then INCHES key for 6281.4 inches press INCHES key again for 6281 inches 3/8. Hope that helps
+Ruyther pereira Model 4050, the CM5 can calculate the degree of arch if you enter the diameter of a circle. Model 4065 the Construction Master Pro will calculate over doorway type arches. Feel free to call or chat our Tech Support line, there is a link on home page at calculated.com or call 800-854-8075 for help.
Dear Carter, we hope this helps Yes you can change the fraction resolution by pressing [Conv] then [Stor] to display the default fraction resolution, now press [+] until you see the desired resolution. Once it is displayed press [On/C] and your good to go.
Rake Wall calculation instructions are found on pages 28/29 of the user guide. If you don't have a hard copy, you can find a link to it on the product page on our website. calculated.com
The CMP Trig is a part of the CMP app - you get both the CMP and the Trig in ONE app. Available for both iPhone and Android smartphone users. Just go to the Apple Store or Google Play to upload, then in preferences turn TRIG to "ON". Our video on our apps show you how to do this if needed.
PITCH of a roof may be entered either by degree or inch per foot. Span of roof should be divided in half and entered as RUN, RISE is the height of the ridge from the wall plate. Hope this helps! If you want add'l help, we have live CHAT on our website or email techsupport at calculated.
This is all very neat, but tell me, can it calculate tip at a restaurant?
Dear Lockheim,
Sure you can use it as a normal
calculator, $30.00 dinner + 20% tip = $36.00
Awesome Product.
Thanks.
More Metric videos to come! You can also check out some specific International pages we've created at calculated com forward slash uk.
Do it yourself Project Calc@
Simplify your home improvement and decorating project with easy to use Home Project Calc. Buy it at Home Depot.
Am looking forward to making the most of this calculator but I think you need to slow down on the tutorial and make it longer. I can't see how one is supposed to get properly to grip with this tool in 4 min 51. I didn't have instructions with mine either. Anyway thanks for a good tool in anticipation.
Hi Alistair - I understand it's a lot to absorb and this overview can be quite overwhelming. I would suggest viewing the short 2 min demos we created to learn the most used functions of the tool and to email us for a Users Guide, that we would be happy to provide. techsupport@calculated.com
Many thanks for your prompt reply, I will email you. I have watched a few other videos and have worked out how to find the common rafter length which is what I was most after. We will build JerUSAlem..
Apologies for this late reply. All of our devices come with user guides. As the CMP model guide is very large, we include a pocket reference guide located in the back pocket of the unit for on-the-go reference. Full users guide in multi language & metric is available on our website. Hope that helps and you are doing well with learning the product.
How do you convert elevations in inches and foot?
Just enter your elevation as a decimal such as 523.45 press CONV key then the FEET key three times and it displays 523 feet 5 inches and 3/8. Or if you want answer just in inches, enter 523.45 FEET key then CONV then INCHES key for 6281.4 inches press INCHES key again for 6281 inches 3/8. Hope that helps
Thanks!
I have the calculator construction 5 how I user for arch calculator
+Ruyther pereira Model 4050, the CM5 can calculate the degree of arch if you enter the diameter of a circle. Model 4065 the Construction Master Pro will calculate over doorway type arches. Feel free to call or chat our Tech Support line, there is a link on home page at calculated.com or call 800-854-8075 for help.
Is there a way to round to the nearest 1/8" inch?
Dear Carter, we hope this helps
Yes you can change the fraction
resolution by pressing [Conv] then [Stor] to display the default fraction
resolution, now press [+] until you see the desired resolution. Once it is
displayed press [On/C] and your good to go.
you should do a demo for the rest of the world too.. lot of potentential customers that dont use imperial just look at a map
I WANT TO KNOW HOW CAN I figure out a rake wall using this calculator ....please need help ..does anyone know. .?
Rake Wall calculation instructions are found on pages 28/29 of the user guide. If you don't have a hard copy, you can find a link to it on the product page on our website. calculated.com
isa b. its the same as useing the pith form
I need the construction Master Pro Trig on app
The CMP Trig is a part of the CMP app - you get both the CMP and the Trig in ONE app. Available for both iPhone and Android smartphone users. Just go to the Apple Store or Google Play to upload, then in preferences turn TRIG to "ON". Our video on our apps show you how to do this if needed.