So so helpful! Thank you! 10/10 Great to know what temp the water and heating should be at. Moved into a new house and was baffling knowing what temp people have it all at. New to this system. I was worried about temp being too hot. If anything fails it’s good to know it’s at the correct temp numbers and settings.
Hi. Have the same boiler. The radiators didn't come on upstairs or downstairs this morning. But the hot water heated up okay. Getting D2 on the display. Tried resetting a few times and no luck. No other error codes. Pressure fine (between 1 and 2). Any idea? Thanks.
Hi, I've got an f37 error on this model but I can't see the black taps to repressurise the boiler (it's on 0.3 bar) - please can you give me a heads up how to do this? Thanks !
Hi there, domicondens 26 c - The display attached to the pcb seems loose and can not get any meaningful display (blank screen or the occasional line or two - none of the symbols or complete numbers that you would expect to see), also can not get any function at all out of it including test mode. It doesn't respond to pressing any of the buttons at all to be honest. What do you think it is? I'm guessing its either the display or the pcb, which is most common to fail?
How would I actually turn on the heating for this boiler? There's a black dial to the right of the control panel shown in this video. Do I have to do anything on it to turn on the heating?
The burner on my My modena C HE seems to be modulated very low when the heating comes on. Consequently the radiators take ages to heat up. It can take 25min before the water gets to 70 C. I put the boiler in test mode and set the burner to 80% and the rads heated up much faster. Do you know why the burner is modulated down so much and is there any way adjusting the setting?
When the boiler is cold it's normal for the pressure to be 1.0 to 1.5 bar and when the boiler is really hot and has been on for quite a while it will get to 2.0 bar and creep up to 2.5 bar
I've just bought a new ferroli modena 32c he boiler. One because of the great price i had it for although it didn,'t come with a clock. I am going to fit a wireless rf thermostat and just wondering which one would be best. thanks
Make sure the clock is definitely off at night and not just the temperature turned down or it'll come on when the room temperature drops .And make sure it says eco on the screen if it doesn't that means it's on pre hotwater where it periodically heats up the water . See the videos how to turn that feature off .
Hi, hope you don't mind me asking but how does one turn the central heating on and off with this boiler? Is it just the summer/winter settings? Just moved into a new place with one of these and the heating is on constantly at the moment!
@@tomhavelock8012 figured mine out, I had a wireless thermostat attached to it that was on timer so had to find that in the house and turn the timers off! Hope you get yours sorted too man, annoying isn't it!
It happened last night too! I've reprogrammed the thermostat 3 times yesterday, didn't turn the heating off. Ended up turning the thermostat off which did the trick. My summer mode won't turn on so I've just turned the boiler off.
@@tomhavelock8012 not the one! I had to set thermostat to lowest temperatures so it wouldn't come on until temps in house go below 5 degrees, will just turn it up again in winter when we actually want heating. Good luck with yours! All the best.
A01( failed to ignite) can be a number of things . This time of year a frozen condense pipe if you have a white pipe coming out the wall from the boiler area ,it could be frozen .....watch videos for frozen condense pipe. No gas , gas valve , electrode or circuit board are others . Check condense pipe first then turn off boiler turn back on (fh will appear ) turn on a hot tap and press the reset like a door bell .if non of that works you will need an engineer preferably someone who knows ferroli boilers ,
The "video" tutorial is fabulous, I have a language problem, I'm Italian. I ask if you can help me how to reset Ferroli Bluehelix Pro boiler in Italian, error A01 like, when to push the "reset" button, thanks
My boiler is fine with hot water when I turn the heating on it’s warms up then the boiler cuts out and comes up a01 or some times a06 what can I do please
l'appareil ne déclenche pas parce que un plombier a touche la vice cancernant pression a gaz s'il vous plais dite moi que pourai- je faire Mercie d'avance
@@thelolguy007 try pressing reset like a door bell . A01 is ignition fault . No gas ,Gas valve, PCB or electrodes If it won't disappear then u may need to replace some parts by a gas safe engineer or call ferroli for a one off repair
Il tutorial "video" è favoloso, ho problema di lingua, sono Italiano. Chiedo se mi potete aiutare come fare il reset Caldaia Ferroli Bluehelix Pro in Italiano, errore A01 come, quando spingere il tasto "reset", grazie
@@LORDUnLuCkY13 go to the video how you set up a Ferroli boiler it'll be useful to get to the parameters... And check / adjust parameter 18 only to see if temperature is set at 55 .
Press top + - buttons together till u see B01 Then press bottom + button till B10 .Then top + button to see it value . Press the minus button so it becomes a zero . Then press top + and - buttons together till it goes to original screen . Then u can press the button
What the heck does the switch to the right of the boiler do?! Nothing in the instructions and nothing on this video! Not even a flaming picture, mention, nothing! What the heck is that about! Can you tell I'm going out of my mind over this? Help me regain my sanity, please!
Spent 20 minutes trying to get one of these to work after I changed a gas meter this video saved me. Cheers
So so helpful! Thank you! 10/10 Great to know what temp the water and heating should be at. Moved into a new house and was baffling knowing what temp people have it all at. New to this system. I was worried about temp being too hot. If anything fails it’s good to know it’s at the correct temp numbers and settings.
Dave, you are my hero. thank you so much for your tutorial. you just helped my fix my boiler. you're a legend. cheer!
I guess it is quite randomly asking but do anyone know of a good website to stream new movies online?
Hi. Have the same boiler. The radiators didn't come on upstairs or downstairs this morning. But the hot water heated up okay. Getting D2 on the display. Tried resetting a few times and no luck. No other error codes. Pressure fine (between 1 and 2). Any idea? Thanks.
Hi, I've got an f37 error on this model but I can't see the black taps to repressurise the boiler (it's on 0.3 bar) - please can you give me a heads up how to do this? Thanks !
I stuck with the same error right now, help please
Hi there, domicondens 26 c -
The display attached to the pcb seems loose and can not get any meaningful display (blank screen or the occasional line or two - none of the symbols or complete numbers that you would expect to see), also can not get any function at all out of it including test mode. It doesn't respond to pressing any of the buttons at all to be honest. What do you think it is? I'm guessing its either the display or the pcb, which is most common to fail?
Hi you have shown the parameters on some the Ferrell boilers have you got them for a Optimax HE 18 S Cheers
Used your video help today andmanaged to get it sorted with your help,Many thanks
Thanks for the appreciation 🙂
Hi Dave,
I have a 27c HE
Heating working but hot water not coming on.
I've topped up to 1.5 and tried reset but still no joy.
Best to ring me .,that's a bit vague to give an answer.
08003202345 9-5
Hi Dave,
Thanks for your reply,it was the flow meter which needed replaced.I had a gas engineer in to do the job.
How would I actually turn on the heating for this boiler? There's a black dial to the right of the control panel shown in this video. Do I have to do anything on it to turn on the heating?
If you watch the video how to use a ferroli clock that may help
How do you actually switch heating on?
There are other videos ...how to use a ferroli clock
The burner on my My modena C HE seems to be modulated very low when the heating comes on. Consequently the radiators take ages to heat up. It can take 25min before the water gets to 70 C.
I put the boiler in test mode and set the burner to 80% and the rads heated up much faster.
Do you know why the burner is modulated down so much and is there any way adjusting the setting?
If you have any worries you should seek a qualified boiler man
Hi, it's normal if I have pressure more than 2 ?
When the boiler is cold it's normal for the pressure to be 1.0 to 1.5 bar and when the boiler is really hot and has been on for quite a while it will get to 2.0 bar and creep up to 2.5 bar
Thanks 👍
When I press +- button the display is red
I've just bought a new ferroli modena 32c he boiler. One because of the great price i had it for although it didn,'t come with a clock. I am going to fit a wireless rf thermostat and just wondering which one would be best. thanks
Tyron Williams
fit a salus they're cheap enough.
has it started leaking yet?
ECO mode is not concerning to radiators heating, it is only concerning water heating?
We have this boiler and it keeps making noise in the night is there a way to stop it from doing anything in the night?
Make sure the clock is definitely off at night and not just the temperature turned down or it'll come on when the room temperature drops .And make sure it says eco on the screen if it doesn't that means it's on pre hotwater where it periodically heats up the water . See the videos how to turn that feature off .
Whats the average temp for heating? And what about pressure 1.5 barr?
Hello Sir, I'm using same boiler as yours. Can you please tell me what does 44 A means with flasing red? And No hot water?
Hi there, just wondering how you fixed this - I have the same issue
Hi, hope you don't mind me asking but how does one turn the central heating on and off with this boiler? Is it just the summer/winter settings? Just moved into a new place with one of these and the heating is on constantly at the moment!
CJ herbz I've got the same problem. Currently 4.55am and the central heating has woken me up
@@tomhavelock8012 figured mine out, I had a wireless thermostat attached to it that was on timer so had to find that in the house and turn the timers off! Hope you get yours sorted too man, annoying isn't it!
It happened last night too! I've reprogrammed the thermostat 3 times yesterday, didn't turn the heating off. Ended up turning the thermostat off which did the trick. My summer mode won't turn on so I've just turned the boiler off.
@@tomhavelock8012 not the one! I had to set thermostat to lowest temperatures so it wouldn't come on until temps in house go below 5 degrees, will just turn it up again in winter when we actually want heating. Good luck with yours! All the best.
Please help me, what will i do if my boiler appears F ECO and the screen is red. I turned it off but nothing happened.
I'm having the same issue did you manage to sort it?
Great video, I get a reoccurring A02 orange flashing error code, any ideas?
gas issue
Thanks my boiler was acting up as it dropped pressure so i refilled it and reset it due to watching your vid
Hi, does anyone know if this has a program option where I can set it to turn on and off at a specific time? Just moved into a new flat. Thanks.
Thank you very much mate, really appreciate the video.
I got A01 flashing sign...may I know what does it mean? How can I fix it
A01( failed to ignite) can be a number of things . This time of year a frozen condense pipe if you have a white pipe coming out the wall from the boiler area ,it could be frozen .....watch videos for frozen condense pipe. No gas , gas valve , electrode or circuit board are others . Check condense pipe first then turn off boiler turn back on (fh will appear ) turn on a hot tap and press the reset like a door bell .if non of that works you will need an engineer preferably someone who knows ferroli boilers ,
Thanks man helped me alot as i didnt know what i was doimg 👍👌
The "video" tutorial is fabulous, I have a language problem, I'm Italian. I ask if you can help me how to reset Ferroli Bluehelix Pro boiler in Italian, error A01
like, when to push the "reset" button, thanks
Premere il pulsante di reset e contare fino a 2 e lasciarlo andare questo dovrebbe resettare la caldaia con l'anomalia A01
@@theferroliman2067 grazie alla prossima volta faccio come dici
Hi, boiler show pressure near 3, heating temperature 66°, what can I do? Or it's normal? thanks
Your need a call out to recharge the expansion vessel and that should cure your pressure
@@theferroliman2067 can I use it?
@@Julia-oc6rt yes but it will need attention
@@theferroliman2067 thank you so much 👍🌷
Hey my boiler is just showing this what do I do - -
My boiler is fine with hot water when I turn the heating on it’s warms up then the boiler cuts out and comes up a01 or some times a06 what can I do please
You need to call a gas engineer as it's a gas/ ignition related problem.....
l'appareil ne déclenche pas parce que un plombier a touche la vice cancernant pression a gaz s'il vous plais dite moi que pourai- je faire Mercie d'avance
What if the screen goes red?
Then there is normally a flashing fault code but you'll have to see what it
@@theferroliman2067 A 01 eco
Then o 01
@@thelolguy007 try pressing reset like a door bell . A01 is ignition fault . No gas ,Gas valve, PCB or electrodes
If it won't disappear then u may need to replace some parts by a gas safe engineer or call ferroli for a one off repair
@@theferroliman2067 now I got t5
Thank you! Thank you! Thank you!
Il tutorial "video" è favoloso, ho problema di lingua, sono Italiano. Chiedo se mi potete aiutare come fare il reset Caldaia Ferroli Bluehelix Pro in Italiano, errore A01
come, quando spingere il tasto "reset", grazie
Every time I press + on the hot water it flashes red and the water stays at 15 instead of 55
What model Ferroli boiler have you got?
@@theferroliman2067 Ferroli Modena 27c HE
@@theferroliman2067 Modena 27 C HE
@@LORDUnLuCkY13 go to the video how you set up a Ferroli boiler it'll be useful to get to the parameters... And check / adjust parameter 18 only to see if temperature is set at 55 .
Thank you!
Have d1 error code rads not working
D1 is just a delay when u use a hot tap . No heating could be a roomstat , clock or diverter valve problem
شكرا
My buttons seam to do different things than supposed to!
thanks it's -5 degrees outside and the boiler wasn't working and i was cold as fuck
I can't turn on summer or winter mod.
Pushing that button,but nothing...
Maybe sameon can explain me something.
Press top + - buttons together till u see B01
Then press bottom + button till B10 .Then top + button to see it value . Press the minus button so it becomes a zero . Then press top + and - buttons together till it goes to original screen . Then u can press the button
F07
What the heck does the switch to the right of the boiler do?! Nothing in the instructions and nothing on this video! Not even a flaming picture, mention, nothing! What the heck is that about! Can you tell I'm going out of my mind over this? Help me regain my sanity, please!
Which switch is this
this boiler is rubbish
Yes it is
totally agree, is it leaking just below the pump? 6 of the 8 I fitted leaked did.
I think it's great x
F05 défaut ferori
Depends what model boiler it is ... Normally fan or circuit board
F7 ferrolli 😰😰😰
My bar is just under the 1 but no heating and error code a 01.?
Check your condense pipe isn't frozen ... every boiler with pipes outside suffer the same problem . look at video my condense pipe is frozen