Automation Studio: Sorting device [Electro-pneumatic control circuit.]

Design and construction of electro-pneumatic control circuit.
Using a sorting device, parts are to be transferred from conveyor belt. By pressing the pushbutton switch, the piston rod of a single-acting cylinder pushes the part out off the conveyor belt. When the pushbutton is released, the piston rod returns to the retracted end position.

[@sahibbhardwaj4361]

Hello Olivier, your content is really helpful. I am an electromechanical engineering student and I stumbled upon your youtube channel and I am learning a lot. Thank you for this! :) Is there by any chance if you can create a video on how to make a Transfer Station. Using a transfer station, parts are to be transferred from a magazine to a processing station. The parts are pushed out of the magazine by cylinder A and transferred to the processing station by cylinder B.

[@sahibbhardwaj4361]

The details are as follows:
When push button 1 is pressed (PB1) and push-button 2 is pressed then Cylinder A will extend.
When a limit switch senses that A has fully extended (LS1) then B will extend.
When Push Button 3 is pressed (PB3) or Push Button 4 is pressed (PB4) then Cylinder A will retract - this will cause B to automatically retract at the same time.
***Using a flow control to control the speed of the B cylinder extending, it should extend at approximately half the speed that it retracts.
• Cylinder A is a single-acting cylinder, controlled by a Double acting pilot control valve.
• Cylinder B is a Double-acting cylinder, controlled by a Single-acting pilot control valve.
• Using appropriate valves, pushbuttons, limit switches, etc.
It would be a great help if you could shed some light on this. :)
Thank you

[@OlivierNkubito]

Thanks @Sahib Bhardwaj! I will do it sooner.

[@belalarqub1627]

Great content! Can you make videos for more machines?? A pnunatics automatic feeding machine for example?

[@OlivierNkubito]

thank you! before you make any circuit you need to have the idea of how it works, how much cylinders it has etc. can you try to explain its operation?

[@itsyourchannel8154]

Which application ur using sir

[@OlivierNkubito]

Automation studio

[@engineeringideas2825]

How do I get the software