10000 times thanks - was looking where the arrow on the gear should point because when I disassembled mine for cleaning the gear fell off without me noticing where it was. Darn me. Your videos are great!!!
Hi Your videos are great and very helpful. My brewgroup keeps getting stuck with a clicking noise. I thought it was the brewgroup motor so I replaced it with a new one but the clicking and brewgroup still gets stuck. Gears look good and are not broken. Any thoughts
Hello there, thanks a lot for this video. I´m not sure if you are still checking the comments. Could you tell me, can I by any chance shut the red decalcification led lamp out, after I didn´t finish the descaling process correctly to the end. Since that time, the descaling lamp keeps on and the machine could not make a single coffee any more. And we are using the Saeco Odea.
My Odea Go gear the larger gear is turning 180 degrees upside down. what could cause this? I opened to clean and replace lube, replaced gears in the correct place, now when i try to reset the position of the gears by closing the door with the tray inserted, the gear rotates to ready position, but its upside down the brew unit won't go in because the pins are reversed. I'm not sure what happened between my dismantling it and putting it back together.
Hi Miroslav, Could you help me with one question? The microswitches of brew drive gears went fixed on the saeco with 2 plastic in the microswitches hole... In my saeco these plastic were broken, how can i fix it?? Thanks, regards
hi Miroslav , I have a Saeco xsmall red sup... the water normaly goes out from the steam dispencer, and the pump works well but the water doesnt goes out from the hose that go in the brew dispencer... do u have some idea what the problems is? thanks a lot if u can help
I have a problem in brew unit of my Saeco Giro. Recently I´d opened my machine to clean (ants) and after that the machine shows problems. Saeco giro problems.
You all prolly dont give a shit but does any of you know of a method to log back into an instagram account..? I stupidly lost my login password. I would love any assistance you can give me
@Sterling Misael thanks for your reply. I got to the site on google and im waiting for the hacking stuff atm. Takes a while so I will reply here later with my results.
10000 times thanks - was looking where the arrow on the gear should point because when I disassembled mine for cleaning the gear fell off without me noticing where it was. Darn me. Your videos are great!!!
Hi
Your videos are great and very helpful.
My brewgroup keeps getting stuck with a clicking noise. I thought it was the brewgroup motor so I replaced it with a new one but the clicking and brewgroup still gets stuck.
Gears look good and are not broken.
Any thoughts
Thank U m8... this guide help me so much.
Excellent, thanks for sharing 🙏🏻
thank you. helped very (gear match and arrow pointing)!
Thanks for this, managed to fix my Machine. :)
Hello there, thanks a lot for this video. I´m not sure if you are still checking the comments. Could you tell me, can I by any chance shut the red decalcification led lamp out, after I didn´t finish the descaling process correctly to the end. Since that time, the descaling lamp keeps on and the machine could not make a single coffee any more. And we are using the Saeco Odea.
My Odea Go gear the larger gear is turning 180 degrees upside down. what could cause this?
I opened to clean and replace lube, replaced gears in the correct place, now when i try to reset the position of the gears by closing the door with the tray inserted, the gear rotates to ready position, but its upside down the brew unit won't go in because the pins are reversed.
I'm not sure what happened between my dismantling it and putting it back together.
Hi Miroslav,
Could you help me with one question? The microswitches of brew drive gears went fixed on the saeco with 2 plastic in the microswitches hole... In my saeco these plastic were broken, how can i fix it??
Thanks, regards
hi Miroslav , I have a Saeco xsmall red sup... the water normaly goes out from the steam dispencer, and the pump works well but the water doesnt goes out from the hose that go in the brew dispencer... do u have some idea what the problems is? thanks a lot if u can help
Can you suggest the correct type of grease or lubricant to use on the gears? Thank you!
Thank You! Well done.
need to replace drip tray on a saeco talea giro plus, how do you take apart the front cover. Thanks
greetings from perth, thank you for sharing this information.
is the maschine in service mode or standard mode?
Благодаря! :-)
I have a problem in brew unit of my Saeco Giro. Recently I´d opened my machine to clean (ants) and after that the machine shows problems.
Saeco giro problems.
Спасибо за видео! А как поменять нагревательный тэн?? Или как его почистить от накипи, чтобы не мигал индикатор??
You all prolly dont give a shit but does any of you know of a method to log back into an instagram account..?
I stupidly lost my login password. I would love any assistance you can give me
@Finn Javier Instablaster :)
@Sterling Misael thanks for your reply. I got to the site on google and im waiting for the hacking stuff atm.
Takes a while so I will reply here later with my results.
@Sterling Misael it did the trick and I now got access to my account again. I'm so happy:D
Thank you so much, you saved my account !
@Finn Javier happy to help :)