Your skills reflect you are a smart detectorist who knows how to read the land. This usually takes time and those who do understand it, are rewarded justly. Well done, and I keep learning every time I watch your videos. Thank you.
Nice pieces of Gold you found. People always go to the most flogged areas of the bush to look for gold, it sometimes works out if you look left field and look along fence lines or roads you just never know.
Thankyou for sharing, what a great journey you have taken us on. I am also running the 7000 & 17NF combo, HY/Norm and User preference between Norm & Difficult to determine ground noise. But I have found a 30 -40% drop in depth when changing from Norm to Difficult so have to make sure I do a couple of scrapes first before changing over. I still love the warble.
Yes I find exactly the same when switching from Normal to Difficult. So I try to run in Normal whenever possible. Have you tried General and Normal as this gives me a bit more depth but can be noisy. Thanks for watching and for your comment. Have a great new year.
I was wondering what your default settings are for Ground Balance and Ground Smoothing? I’ve been running Semi Auto and Locate Patch. Not sure if I am heading in the right direction with these.
I use ground balance in semi auto and smoothing off. To balance just raise and lower the coil about 6" very slowly a few times until it quietens down as needed. Thanks for watching and for your comment.
Quero comprar um aparelho, estou indeciso entre três: gpx5000, gpx6000 ou gpz7000, o que vc recomendaria pra terrenos muitos difíceis e com variedades de pepitas de 0,10, a 5,00 gramas.
Good eye mite. New sub from the other side. Imma power watch your channel. Wish you plenty of luck on your hunts. And if you see any roos, give it a smack for me. Gday. 👋😎🇨🇦
@@metaldetectingfun aye, got some nice chunks with that total, 31 gram bit, 61 gram bit, the missus got a speccie with 63 grams of gold in it, speccie with bang on an ounce of gold in it, all pretty faint signals, most of the bits we got were all over 3 grams I reckon, gotta take the time to walk around listening out for them aye but they are there, happy hunting fella, hope to see some more from ya
Your skills reflect you are a smart detectorist who knows how to read the land. This usually takes time and those who do understand it, are rewarded justly. Well done, and I keep learning every time I watch your videos. Thank you.
Thanks for your kind comments however luck also plays a part. Thanks for watching and for your comment
Nice pieces of Gold you found. People always go to the most flogged areas of the bush to look for gold, it sometimes works out if you look left field and look along fence lines or roads you just never know.
You got that right! Thanks for watching and for your comment.
Круто 👍
Cool 👍
Happy New Year😀🎉🎉
Happy New year to you too. Thanks for watching and for your comment
Thankyou for sharing, what a great journey you have taken us on. I am also running the 7000 & 17NF combo, HY/Norm and User preference between Norm & Difficult to determine ground noise. But I have found a 30 -40% drop in depth when changing from Norm to Difficult so have to make sure I do a couple of scrapes first before changing over. I still love the warble.
Yes I find exactly the same when switching from Normal to Difficult. So I try to run in Normal whenever possible. Have you tried General and Normal as this gives me a bit more depth but can be noisy. Thanks for watching and for your comment. Have a great new year.
that soil you were digging up for the last bit was alluvial wash. no better ground
You know it! Thanks for your comment and for watching my efforts.
Enjoyed your video. Thanks for sharing your knowledge of detecting and how you run your 7000.
You bet. Thanks for watching and for your comment.
I was wondering what your default settings are for Ground Balance and Ground Smoothing? I’ve been running Semi Auto and Locate Patch. Not sure if I am heading in the right direction with these.
I use ground balance in semi auto and smoothing off. To balance just raise and lower the coil about 6" very slowly a few times until it quietens down as needed. Thanks for watching and for your comment.
Well done, Happy New Year 😊
Same to you! Thanks for watching and for your comment
Fushn & Chup's not in australia mate
Quero comprar um aparelho, estou indeciso entre três: gpx5000, gpx6000 ou gpz7000, o que vc recomendaria pra terrenos muitos difíceis e com variedades de pepitas de 0,10, a 5,00 gramas.
Para las pepitas más pequeñas, recomendaría el GPX 6000. Gracias por sus comentarios y por mirar.
Para pepitas menores, recomendo o GPX 6000 com uma bobina localizadora de pepitas. Obrigado por assistir e pelo seu comentário.
Good eye mite. New sub from the other side. Imma power watch your channel. Wish you plenty of luck on your hunts. And if you see any roos, give it a smack for me. Gday. 👋😎🇨🇦
Thank for your comment and for watching.
I know exactly where that is, found just under 300 grams not far from there
Wow that is amazing. Thanks for watching and for your comment
@@metaldetectingfun aye, got some nice chunks with that total, 31 gram bit, 61 gram bit, the missus got a speccie with 63 grams of gold in it, speccie with bang on an ounce of gold in it, all pretty faint signals, most of the bits we got were all over 3 grams I reckon, gotta take the time to walk around listening out for them aye but they are there, happy hunting fella, hope to see some more from ya