How to Clean Shure Microphones
Вставка
- Опубліковано 3 жов 2024
- UPDATE REGARDING COVID-19 VIRUS. Unfortunately, Shure cannot provide advice regarding what disinfectant methods are effective against the Covid-19 virus; any such question should be directed to appropriate disease control experts. However, Shure will be testing and providing information on the impact to Shure products of substances and procedures commonly used for disinfection.
As we seek to provide the best possible information, our evaluation of these various cleaning methods will be ongoing.
Check this site regularly for updates as new information becomes available: shu.re/3ec2S80
Chris Lyons and John Born from Shure discuss how to properly clean and care for a microphone like an SM58.
Follow Shure on Facebook and Instagram:
/ shureinc
/ shure
#Shure #audio #microphones
Personally I clean my microphones by unscrewing the grille, taking out the foam windscreen and putting both in warm water with detergent and leaving them to soak for a while in order to loosen up all the yuk, then I use a toothbrush to clean the entire metal grille and rinse through the foam windscreen under a running tap, then they are both sprayed with Dettol surface cleanser and then dried with kitchen towel and a hairdryer, GUARANTEED! as fresh as a daisy 😊😊
Better advice than in the video.
I bought an sm58 a couple weeks ago for functions and rehearsals where I play bass and sing backing vocals, and so I never again have to smell the death breath of other people. Then just last night, a drunk guy at a wedding thought it was appropriate to take my microphone off the stand and start singing along to Elvis with his mouth all over it. I'm absolutely livid. I'll definitely be cleaning it today.
Accidents happen 😂
i wanto to clean the capsule
No you don't want to do that, trust my advice it could end in a dead capsule 🤔
very disappointed because Shure sent it to the china factory .. I prefer Shure sm58 made in Mexico
Sir I am full beginner. I want to record my written poetry professionally. Suggest me audio interface and dynamic mic. Which gives me professional level quality. Because my room is not sound proof. My total budget is 300 dollars. Tell me such a setup that I will not regret buying.
Hi! You might want to checkout some of the mics we have here: www.shure.com/en-US/performance-production/applications/content-creation. Our Support Team can provide some recommendations for your setup as well. You can reach them at shu.re/contact.
How do I clean the SHURE ELVIS MIC BLUE FOAM PART?
bluegrassfan23 Sorry for the delayed response. Did you notice a change since the cleaning? Additionally, are you comparing a Beta 58A with a studio condenser? Condenser mics have a hotter output and more detail than a dynamic mic (like the Beta 58A) will.
Now with covid what would be the updated process for cleaning mics?
Shure has received many requests for recommendations on the best ways to clean and disinfect our products. Please note that Shure cannot provide advice regarding what disinfectant methods are effective against the Covid-19 virus; any such question should be directed to appropriate disease control experts. However, Shure will be testing and providing information on the impact to Shure products of substances and procedures commonly used for disinfection.
As we seek to provide the best possible information, our evaluation of these various cleaning methods will be ongoing. Check this site regularly for updates as new information becomes available: service.shure.com/s/article/how-should-i-clean-my-microphone?language=en_US
Hi team, Is the foam from the KSM9HS capsule removable? because I cant get it out, certainly not as easily as removing a SM58 foam.
Hi! We suggest taking a look at this guide on how to clean wireless mics: www.shure.com/en-US/support/mic-cleaning/wireless-handheld
OK - so I've tried cleaning the Beta 58A voice mics I own - and the output from both of the mics is just "not there" in comparison to some of the other mics I own and use in jams and performance. As a result I must heat up the Shures 58As to be on the same level with others (Proformance and AKG Vienna studio models). Plus the crisp output is just no longer there with my Shures. Any help out there?
bluegrassfan23
May need some
Service work or replacements of parts or whole mic 🎤
If you really want to get up a mic user stick the stink beetle inside the grill and rattle the mic a few times..... those Aussie stink beetles work the best.
What about a super 55 mic?
Spray a rag with Glen 20 and wipe down the mic without disassembly for quick on the run / between bands germ suppression.
Well, this is pretty useless.
I take the foam out and put the grills in the dishwasher. That way I can do a dozen at a time. It gets rid of lipstick and germs. But, as mentioned by Tim do we just wash and dry the foam?
Do you use the diluted detergent solution to clean the foam as well? If so, would that be a soak-rinse-dry process?
We all knew that wasted video.......
And the cutip? 🤔
Lol yeah what about that evasive cutip 😂
Where could you buy this foam insert? I look all over the web. 1:05
Hi! Our Support Team is happy to help you out. You can reach them at shu.re/contact.
Any cleaning tips for the SM7B?
Hi! That's a great question. Our support team can advise. You can reach them here: shu.re/contact
Saludos traduzca en español. Ya que somo muchos los consumidores en latino América y España.. Saludos
Where can I get replacement foam for Beta 57?
Our parts department can best advise. You can call them directly at 800-516-2525, ext. 3.
@@shure thanks
Best way to clean off the sticky gunk from the handle of a mic?
You can try a small amount of rubbing alcohol or product such as GooGone (follow any warnings on the packaging as far as skin irritation or other hazards). Be careful not to introduce any cleaning liquids to electronic parts.
Baking soda with a bit of hot water to make a gritty paste to rub on with a bit of tissue or toilet paper.
Oh, and avoid goo gone for any purpose..I find the smell tends to cling and linger
clear, concise and to the point way to go, Peace !
Thanks. I've wanted to clean my Shure Beta 58A's for some time now - but was reluctant to do so for fear of ruining them. You just made my job much easier.
I just flushed the grill a few times with 99% lab alcohol.