for beginners who have never been on one before, it is not easy to apply just right amount of pressure to the joy stick to move it forward or backward or you would rush into the rackings. Over-steering is very common and very hard to learn to apply just right amount to turn on the steering wheel to move the truck in a right direction.
Definitely you are correct but I am pretty sure once you get the feel on the PIT you would know just the right amount of pressure plus you’ll get to drive it to the location where you’re going to get tested so before getting their try to feel how far you can move the joystick 🕹 to know how fragile it might be . But stay bless
Over-steering can lead to flip over on sharp turns. The steering can be adjust to specific setting delay to counter measure your speed turns,but warehouse company bypass these setting to mass produce their productivity. I have work on these forklift and maintenance it so i know what fuck am talk about. Alot of southern warehouses operate in this function. Scary... So ask questions about safety !!! if you want to go home in one pieces.
Applied for a stand up forklift position and I didn’t have any stand up forklift experience but I said I did but it was a few years back, at the interview now and they are kinda doubting that I know how to drive the stand up forklift. They asked to test me the same day but I asked to use the bathroom before the test and this video saved me lol
Those are some of the nicest, cleanest equipment I've ever seen on a job. At my job...the lifts are all fucked up and ragedy. Sometimes they even cut off while operating them...smh lol
You're incredible my G! You broke it down to where not saying they can't but to were a lil kid could understand how to operate this operating machine. The ops on this reach truck are almost the same as a cherry picker but only on the gear shaft is where it gets interesting. It amazed me how you properly in detailed every in and out about the functions of video. May "God keep blessing" you in every area of your life my G!
Thanks homie I start a new job using the Raymond I'm use to operating the Crown stand up reach, when I used it during the interview I thought I was on the Crown lol
Bro This is One of the Best Training Videos I've Seen Thank You I Have an Orientation in the Am, And I Told Them I Have Drove One, But I Never Have And They Don't Train You Just Throw You Out There
I know they're going to go over this with me before my forklift training but I just wanted to get a headstart cause im nervous 😂 Great video, thank you for this content!
You're welcome bro I try to make videos were ppl can actually understand the proper way to use this equipment other videos cutt out the specifics. So yes tha ks for you're feed back.👌🏻
This is very helpful! I just got an Equipment Operator position but I never drive forklift lol. Next week is my training but good thing I already know the basic bec of you! 😎 thanks man!
dude that was really cool, and we have the same exact raymond lifts. I feel a lot better about trying it now, thanks a lot for step by step, and great easy steps. you probably certify guys at your job im guessing...
Thank you for sharing this video. Starting Monday I have to learn how to use a forklift, never used one in my life, my anxiety level is 101% right now, so scared and nervous. It helps tremendously that you break down every step and we can see you using the controls to operate the lift.
I just hope you get to work in an environment where you get the time to learn to drive one and especially to drive the specific machine you are using as every model is different. I was glad the first truck I was about to load the first day I got my certificate was manned by a down to earth driver, who approached me: 'We've got all day. Don't rush it. As long as you keep yourself, the forklift, my truck and the goods you are handling in one piece, I'm happy. Take it slow and we'll get there.' Glad he said that, but even though I did not complete the job and let my co-worker do it (I was only trained on electric forklifts, while the one I had to use was a fuel-operated one which is completely different)
Just take your time, the steering is going to be the hardest thing to get used to on a stand-up truck of just about any kind...this particular kind of truck drives easier going in reverse the entire time, so the steering is going to be reversed the entire time you're going "forward", just take your time. This particular truck can also get up to a decent clip pretty quickly and can have steering that's sensitive. So very very important to take your time and get used to the nuances of how each truck is set.
@@gamechaser002 Exactly, I used this model for many years before we switched to Crowns, after a little while with the Raymonds, it becomes "muscle memory" . The more you use it, the more you get better. Like anything. But then the Crowns came in, and oh man, had to re-learn all that memory, it sucked, but again, you do things everyday and it becomes the norm. Just cause they were a little different.
My name is Raymond and I just came from a interview I lied about knowing how to operate stand up forklifts Man I hope this video work because I got the job and I start Monday 🤷🏽
Awesome to hear that, I wish some one would of broke it down to me this way when I first started but this is why I decided to made this video glad to hear it worked out for you thank you
I’m nervous about using this cuz I only know how to drive a standard forklift; I need practice cuz I have anxiety issues so I tend to freeze up .trying to learn before I even use this reach
I'm pretty sure you might get like that, But a lil advice when you happen to get on a reach forklift forget that you're being watched and graded. Do you're you're thing and be confident about what you're about to do . I use to be the same way but one time I enter the warehouse like I owned the place and got on it and forgot anyone was their and I passed it with flying colors ever since then I haven't looked backed now I'm able to operate every type of Forklifts their is to know. You got this 💪🏻👌🏻💯❗
Eric Lemus thank you bro. I will be studying your video cuz you break it down very well and being Latino puts me at ease lol . So thanks for your simple breakdown and guidance
@@Skorp-eon I'm glad I was able to put you at ease and that my video is being very helpful to you. Best Of Luck To You Bro . If you wanna know more about other forklifts just let me know and I'll put more videos
Thanks breh breh. I had a interview tomorrow and I lied I know how to operate one of those, now Ima put my UA-cam skills tomorrow and see if they hired me lol.
Uhhhhh yesterday was my first day on a reach Truck, and it’s NOT this simple. The controls , yeah. Simple …but to actually maneuver this vehicle takes time and lots of practice.
Just an update for everyone: This thing is pretty hard to drive ngl, steering is the hardest thing. It definitely takes some getting used to. Anyways I passed and they offered a job. Just be confident and don’t act scary. They said that’s what got me the job.
I would like to learn how to operate a sit down forklift and a stand-up one. I started at coca cola three and a half weeks ago and just got my pallet jack card.
okay sounds like you're determined to learn , I would definitely be uploading a few more videos so you can learn those your asking for. Just be patient do to this covid19 I havent been inside a warehouse, but i got you bro. Goodluck out their .....
I do road crew work I’ve had 11 years of reach operation, and let me tell y’all something if you work hard enough you can get on the road and make big money like me.
I lied on a resume , came to this video, went in like a pro. Thank you so much man 💯
😂😂😂😈👍🏼🔥💯 That’s ritee I’m glad to hear that champ keep it up congrats 🍾🎊🎉💯🔥
Man you know well you crashed your first day lmao
Lied on my resume now im here hahaha
Just look at the video and remember step by step and be confident when you get on it. You got thiss
Lol bro me too hahaha I got an interview tomorrow!! I've been sit down for years but never a stand up
Update! Fck up my God damn wrist driving the electric pallets jack wakl tf out
❤
@@srtcreationscisame boat
Didn't do that much Raymond, got an interview this morning. Thanks for the refresh !
for beginners who have never been on one before, it is not easy to apply just right amount of pressure to the joy stick to move it forward or backward or you would rush into the rackings. Over-steering is very common and very hard to learn to apply just right amount to turn on the steering wheel to move the truck in a right direction.
Definitely you are correct but I am pretty sure once you get the feel on the PIT you would know just the right amount of pressure plus you’ll get to drive it to the location where you’re going to get tested so before getting their try to feel how far you can move the joystick 🕹 to know how fragile it might be . But stay bless
Over-steering can lead to flip over on sharp turns. The steering can be adjust to specific setting delay to counter measure your speed turns,but warehouse company bypass these setting to mass produce their productivity. I have work on these forklift and maintenance it so i know what fuck am talk about. Alot of southern warehouses operate in this function. Scary... So ask questions about safety !!! if you want to go home in one pieces.
'you on break, you on break . Thats my supervisor he doesn't mind' lol
Applied for a stand up forklift position and I didn’t have any stand up forklift experience but I said I did but it was a few years back, at the interview now and they are kinda doubting that I know how to drive the stand up forklift. They asked to test me the same day but I asked to use the bathroom before the test and this video saved me lol
Well I’m very glad you ran into my training video lol great to hear you got the job congratulations buddy and keep it up 👍🏼 thanks for the support 💯😈
😂😂 did you do good?
I lied on my application and now I have a test tomorrow
I love how we all learn differently. Thank you SO much for this video, I completely understand everything now. I'll show my boss on Monday!!
Yes definitely that is great to hear . I hope it was what you were looking for. You work in a warehouse?
Those are some of the nicest, cleanest equipment I've ever seen on a job. At my job...the lifts are all fucked up and ragedy. Sometimes they even cut off while operating them...smh lol
Mine sprung a hydro leak in the aisle the other day. Spill guy came with the cleanup kit, and HIS truck sprung a leak in the same aisle.
Lol
My guy thanks for getting me caught up I hadn't used a reach in years! Just got a good paying job doing it start Monday
Any time
I will definitely recommend people who are looking to learn how to operate the reach truck to watch this video
Thanks bro I really appreciate it that. Goodluckk👌🏻
Nice video sir I'm learn in this forklift tar
The best and easy explanation! To the point! Thanks!!!!!
You're incredible my G! You broke it down to where not saying they can't but to were a lil kid could understand how to operate this operating machine. The ops on this reach truck are almost the same as a cherry picker but only on the gear shaft is where it gets interesting. It amazed me how you properly in detailed every in and out about the functions of video. May "God keep blessing" you in every area of your life my G!
Hey Royce thanks for that feed back my G hope it all goes good for yourself stay up playa 💯💯💯👌🏻
Thanks homie I start a new job using the Raymond I'm use to operating the Crown stand up reach, when I used it during the interview I thought I was on the Crown lol
Haha I bett yea their a lil bitt different but their kool. Hope everything went good with you. Stay safee
Bro
This is One of the Best Training Videos I've Seen
Thank You
I Have an Orientation in the Am, And I Told Them I Have Drove One, But I Never Have
And They Don't Train You
Just Throw You Out There
Well I’m very glad that I was able to help you in what you were looking for. Hope you get the job
How did it go ?
@@Notepad123 I Aced it
Been Driving a Reach with ease since
It's like riding a bike
Once you learn you got it
Takes a few tries but you get it
Man thanks bro for making this video, made it to where I feel little bit more confident when operating one of these.
You're welcome bro. Hopefully everything went good for you. If you ever wanna know about other equipments let me know I'll be glad to demonstrate
I know they're going to go over this with me before my forklift training but I just wanted to get a headstart cause im nervous 😂 Great video, thank you for this content!
Thanks man! This will help me get to know the truck even before I go ask to be trained on one of those
That's awesome to hear Gilbert hope it all goes you're way .
This really makes me miss being on a Raymond. So much more intuitive than a Crown.
Good looking out , good vid. Drove nothing but crowns, but I'm starting a new job with all Raymond reaches. Gracias
Thanks buddy i got a new job as a forklift reach driver with camera this is my new job after using counter balance
Thanks for the explanation, with the examples you understand one very well!
You're welcome bro I try to make videos were ppl can actually understand the proper way to use this equipment other videos cutt out the specifics. So yes tha ks for you're feed back.👌🏻
This is very helpful! I just got an Equipment Operator position but I never drive forklift lol. Next week is my training but good thing I already know the basic bec of you! 😎 thanks man!
I’m glad I was able to help out in any way hope you got the job brother
@@fearthecontent1464 already good at it brother! 😎
nice video brother looking forward to working for forklift luv it
Simple explanation and to the point thank you.
Thanks bro im glad I was able to help 🙏 stay up & safe out their 👌🏻👌🏻👌🏻💯
dude that was really cool, and we have the same exact raymond lifts. I feel a lot better about trying it now, thanks a lot for step by step, and great easy steps. you probably certify guys at your job im guessing...
I actually did , I was the supervisor for the 2nd shift hope you got what you were looking for 👍🏼💯
Wow bro. You explain in such a easy way awesome...
It been three year I appreciate ur timing making a training video for us noobie
Good job homie im starting my job Monday.
Thanx man. You were a big help!!!
Thank you for sharing this video. Starting Monday I have to learn how to use a forklift, never used one in my life, my anxiety level is 101% right now, so scared and nervous. It helps tremendously that you break down every step and we can see you using the controls to operate the lift.
Im glad I was sort of a help but you'll be great don't worry just have trust in you're self you got this. Thanks for you're feed back
I just hope you get to work in an environment where you get the time to learn to drive one and especially to drive the specific machine you are using as every model is different. I was glad the first truck I was about to load the first day I got my certificate was manned by a down to earth driver, who approached me: 'We've got all day. Don't rush it. As long as you keep yourself, the forklift, my truck and the goods you are handling in one piece, I'm happy. Take it slow and we'll get there.'
Glad he said that, but even though I did not complete the job and let my co-worker do it (I was only trained on electric forklifts, while the one I had to use was a fuel-operated one which is completely different)
Just take your time, the steering is going to be the hardest thing to get used to on a stand-up truck of just about any kind...this particular kind of truck drives easier going in reverse the entire time, so the steering is going to be reversed the entire time you're going "forward", just take your time. This particular truck can also get up to a decent clip pretty quickly and can have steering that's sensitive. So very very important to take your time and get used to the nuances of how each truck is set.
@@gamechaser002 Exactly, I used this model for many years before we switched to Crowns, after a little while with the Raymonds, it becomes "muscle memory" . The more you use it, the more you get better. Like anything. But then the Crowns came in, and oh man, had to re-learn all that memory, it sucked, but again, you do things everyday and it becomes the norm. Just cause they were a little different.
@@gamechaser002 I thought the crown is only inverted
I love Raymond reach trucks!
Thanks for sharing your video it was very useful for me👍
Watching this video because I got orientation today and I start tomorrow and I got it all down quick
U finna help me get hired
My name is Raymond and I just came from a interview I lied about knowing how to operate stand up forklifts
Man I hope this video work because I got the job and I start Monday 🤷🏽
How did it go?
my favorite forklift because it's more challenging to operate quickly... but more satisfying
Say mego I don't have to be trained now you just trained me watching your video! 😆 you made it easy as pie
Awesome to hear that, I wish some one would of broke it down to me this way when I first started but this is why I decided to made this video glad to hear it worked out for you thank you
Thanks bro I just got certified in under 10 minutes 😂
This video just got me my license
Im happy you got you're license brother im glad to hear i was a helping hand . awesome
Thanks definitely simple and u took ur time with explaining thanks 👍 my friend
For sure I’m happy I was able to help you out my friend 👍🏼👍🏼👍🏼💯
You a real one g! ❤
Good video bro I needed dis here
For sure bro I appreciate it that. Thanks for the feed back 👌🏻
I’m nervous about using this cuz I only know how to drive a standard forklift; I need practice cuz I have anxiety issues so I tend to freeze up .trying to learn before I even use this reach
I'm pretty sure you might get like that, But a lil advice when you happen to get on a reach forklift forget that you're being watched and graded. Do you're you're thing and be confident about what you're about to do . I use to be the same way but one time I enter the warehouse like I owned the place and got on it and forgot anyone was their and I passed it with flying colors ever since then I haven't looked backed now I'm able to operate every type of Forklifts their is to know. You got this 💪🏻👌🏻💯❗
Eric Lemus thank you bro. I will be studying your video cuz you break it down very well and being Latino puts me at ease lol . So thanks for your simple breakdown and guidance
@@Skorp-eon I'm glad I was able to put you at ease and that my video is being very helpful to you. Best Of Luck To You Bro . If you wanna know more about other forklifts just let me know and I'll put more videos
Hey I was the same way but after a week or so it was cake just like what Eric said be confident and ease just be you
@@fearthecontent1464 Preach!
Thanks bro. With this am good to go
Thank you for your video it helped a lot
You're welcome hope it helped you with what you were looking for 👌🏻
@@fearthecontent1464 Yes Indeed! I have a test on it tomorrow, and it's been awhile since I been on a stand up.
Hel,yeah...u did good on explaining...Home boy..easy. ❤
Thanks very useful
You’re very welcome it’s a pleasure to be able to help you out 👍🏼💯
Thank you brother
Great vid thanks
Thanks alot❗ Hope it served you to best advantage 💯👌🏻
I like thank you for your training vidéo...
No problem bro I highly appreciate it for you’re comment
I drive a Toyota reach in a refrigerated cold storage warehouse it was hard at first but I got it down
That is awesome bro 😎 I’m glad you got it down to the T keep it up 💯
thank you for the vid
Yea no problem
Very informative thanks
You're welcome, & I try to be helpful for those that need the knowledge with this types of forklifts 👌🏻
Thank you homie!
You’re welcome I hope it was of great use for you 👌🏼💯👍🏼
I have to start using one of these on Monday
I hope you get this and use it to you're full advantage good luck .
Thanks breh breh. I had a interview tomorrow and I lied I know how to operate one of those, now Ima put my UA-cam skills tomorrow and see if they hired me lol.
Good luck on you’re interview I hope 🤞🏼 you get that job you deserve it don’t forget to like and and subscribe thanks
@@fearthecontent1464 got the job brehbreh thanks.
@@cuddy7174 That’s wassup glad to hear that. Recommend this video to other ppl that are looking for that knowledge. Stay positive fam💪🏼
Good looking out
Det is perfec exprience thank sr
Well I am very happy you enjoyed this video honestly I’m glad I was able to help in anyway stay bless😉👍🏼
I have a interview next week I’m kinda nervous, do you recommend I just go to training school to get certified for this equipment???
Very good bro thankyou bro 🥰🥰🥰
I'm glad I was able to help bro have an awesome day n hooe you found what you were looking for 💪🏻
Good training
Hey thank you my Wasim I appreciate it you're compliments . Hope it helped you out 👌🏻
Epic.💪
Thanks Bro👌🏻💯
good looking G
Yup you’re welcome without a doubt 💯💯💯
Not all reach trucks have the lil button to lift the forks,if it doesnt gotta pull the joystick toward you to lift and away to lower
Love you❤
Good job
Thanks
Thank for the film. I'm a bit scared of the acceleration though.
Super thanks
No problem bro💯👌🏼
Miss you
Thank you
You’re welcome hope it helped you out
Uhhhhh yesterday was my first day on a reach Truck, and it’s NOT this simple. The controls , yeah. Simple …but to actually maneuver this vehicle takes time and lots of practice.
Just got my reach ticket ! Little nervous still and not the greatest and lining up fast yet but still optimistic:)
Awesome to hear that hope you do great
Getting the hang of it yet?
@@josh6059 yeah can grab pallets from the 3-4 rack no problem just have to line up good. I drive at 2-3 usually for speed setting
Love you
Just an update for everyone:
This thing is pretty hard to drive ngl, steering is the hardest thing. It definitely takes some getting used to. Anyways I passed and they offered a job.
Just be confident and don’t act scary. They said that’s what got me the job.
Starting a job and always used crown and was just told they only had Raymond’s and they’re flying me out so this is going to help lmfao
Yup I’m glad my video could be of some use I appreciate it
Raider Nation!!!
Haha That's riteee💯💯💯
Good 👌👌
Thank you! Cheers!
I like reach truck,
Glad to hear that
Que Onda erick its Abel we work at the hillmen...
Que onda canijo wassup with you whats good. Msg me 5623746455
With love
friend do you know what is the access code for the forklift to unlock the speed
🙏🙏🙏
I would like to learn how to operate a sit down forklift and a stand-up one. I started at coca cola three and a half weeks ago and just got my pallet jack card.
okay sounds like you're determined to learn , I would definitely be uploading a few more videos so you can learn those your asking for. Just be patient do to this covid19 I havent been inside a warehouse, but i got you bro. Goodluck out their .....
Roll up to a shelve and pull a pallet down for us, then roll up on a pallet then pick it up,put it on the shelf..
Thought turning the wheel to the right makes the end of the lift go left. And left makes it go right.
The crown is like that the raymond no
Yea that's true . Guy on the bottom answered my question. Their quieter different
I do road crew work I’ve had 11 years of reach operation, and let me tell y’all something if you work hard enough you can get on the road and make big money like me.
That’s awesome to hear stay strong 💪🏼
How is that?
@@fearthecontent1464 it’s pretty amazing.
@@emmanuelmelendez23 what’s your job title?
i just lied for a forklift job i hope this works haha
Awesome I’m glad I was able to help you out on this journey of yours good job
Need more
Great video. Is there a way to tilt the forks?
Yes their is on the control panel it should have an arrow up & down or an image of the forks and up n down . But it’s their
I'm bouta go for the interview. iletchu knw if i win
bro is that CALERES 🤣
Love you well swe do don
I’m a forklift operator I never operated a stand up forklift tell me some hints and tricks because we’re I work I’m certified but never operated one
Sound weird but it’s true they didn’t have time so my first full shift and never operated a stand up so like I’m nervous as hell
Damn thats too easy
I am reach truck operator...
Awesome dude 💯
How do i make it faster
See you soon don like well I'm
Ey foo did you end up going on break
I suree did 🤣 👌🏻
😂😂💯
You recorded it on your break
I love you smile well I'm