I would consider buying that bike. If it had been carbureted & a rear shock/soft tail. The ABS & fuel injection is just expensive practically useless over kill. The rear cylinder is going to wear much faster from lack of airflow. I would add an air scoop or electric cooling fan to the rear cyl if the alternator can handle it. I wonder how long the fuel injection parts will last...All those extra FI parts to replace 1 part/the carburetor...Fuel pump, return lines, injector, ecm, sensors,etc... With no performance increase over a well tuned carburetor. Great job on the build & looks.
A wee thing I'll do to my bikes is add reflector tape to the wheel rims, and I think putting a white tape or even just painting the rims could set your bike off
Nope! I tested this out in fear it would do just this, and actually made the grill sit about 5mm away from the glass and its been perfectly fine. The print material has a 200 degree melting temp but I had to check
It makes you (us) scratch your chin and say " it might be ALOT cheaper than buying custom parts for a small capacity vtwin "🤔 so why not !?, not alot too lose , even if you dont like the end result .....i'm sure your mum would 😁. Peace out ✌
Hi Jish Long time fan! I love your content. Im sorry but I lose interest in the video when you start with revealing what happens in the video.. I forgot to skip forward today ;( Greeting from Denmark
I do apologise you don't like the way I structure my videos matey. But this is how I like my videos to be. a little hint at the beginning for audience retention and a nice reveal at the end
Milwaukee Garage Takeover - uk.milwaukeetool.eu/competitions/garage-takeover/
You've really transformed the bike. It looks really nice now.
very good for an easy inline 4 bobber build
Nice work! Those cosmetic tweaks have really transformed the look of that engine. Good use of the 3D scanner and printer too. 👍
Thanks! its so nice to use this kind of building tech.
mate, that bike has been transformed ! outstanding
Seen Harleys that look worse, for a 250 Chinese bike you've made it look fire
I would consider buying that bike. If it had been carbureted & a rear shock/soft tail. The ABS & fuel injection is just expensive practically useless over kill.
The rear cylinder is going to wear much faster from lack of airflow.
I would add an air scoop or electric cooling fan to the rear cyl if the alternator can handle it.
I wonder how long the fuel injection parts will last...All those extra FI parts to replace 1 part/the carburetor...Fuel pump, return lines, injector, ecm, sensors,etc... With no performance increase over a well tuned carburetor.
Great job on the build & looks.
when spraying plastic pieces, use a plastic primer before painting or even before sanding primer. It will last longer.
Indeed!
Nice Milwaukee box and tools!!!!
I would like to see you put a foot clutch in a hand shift on it, I think it would look good on the bike
Been waiting for this one ☝️ 😊
Hope you enjoyed it! Next video should be the Finale!
@@jishh excited!
Love this build
Don't remove the plastic bits, you'll remove half the bike!
😮 that actually looks great, mate. Well done.
I'm not usually a fan of black out, but this looks really good Josh!!! Have you been riding it, do people wonder what it is?
I think it just suits this kind of bike 👌 ill be riding it more in the next video ⚡️
I think the headlight cover look like a mega waste of time too😂😂
Just like this comment 😁
You should show brief before / after shots with each change
Looking at it you would can't really tell it is only a 250cc. I wanted to hear the exhaust with the wrap!
Next video sir! ill make sure you get plenty of exhaust sounds
Looking good - did you adjust the exhaust at all or does it sound the same?
Nothing but heavy duty!
You know!
A wee thing I'll do to my bikes is add reflector tape to the wheel rims, and I think putting a white tape or even just painting the rims could set your bike off
I like it! if I wasn't going all black, I would have considered this
White rims and a "racing stripe" down the centre of the tank would go harddd
I’m just still confused as to how you managed to get one in the uk 😂 cause I really want their retro sports bike
I saw that “steel-it” paint on B is for Build, years ago, but getting hold of it is a nightmare!
Its available via the link in my description dude 🤘
Could you tell me where you've order the bike, I've been searching but...Thanks ahead
Mega job Josh, looks mean
could anyone help me where to order one this chinese bobber cherrs
Where is the link for the Milwaukee tools contest ?
Milwaukee Garage Takeover - uk.milwaukeetool.eu/competitions/garage-takeover/
Legend!
Looks 💯 better.
Where is the link for the Milwaukee tool giveaway? I don't see it in the video description or comments.
Milwaukee Garage Takeover - uk.milwaukeetool.eu/competitions/garage-takeover/
What was the rgb tube light you used bro? Love that scene 👌🏼
I bought it on kickstarter a while ago and the company flopped. Its just a 4ft LED light tube 🤘
I'd find a second hand Japanese vtwin and work out putting that in the bike and dump that engine as the rest of the bikes not bad looking
wont the plastic headlight melt?
Nope! I tested this out in fear it would do just this, and actually made the grill sit about 5mm away from the glass and its been perfectly fine. The print material has a 200 degree melting temp but I had to check
@@jishh unlocks loads of potential for design , cheers jish
what bike is that originally?
Its called a Zeths
您好我是中国的rider, 摩托车坐垫在哪里购买?
🤙🤙🤙
Love from Bangladesh 🇧🇩❤️🩹
It makes you (us) scratch your chin and say " it might be ALOT cheaper than buying custom parts for a small capacity vtwin "🤔
so why not !?, not alot too lose , even if you dont like the end result .....i'm sure your mum would 😁.
Peace out ✌
Hi Jish
Long time fan! I love your content. Im sorry but I lose interest in the video when you start with revealing what happens in the video.. I forgot to skip forward today ;(
Greeting from Denmark
I do apologise you don't like the way I structure my videos matey. But this is how I like my videos to be. a little hint at the beginning for audience retention and a nice reveal at the end
First