Build an 8x8 Play Structure with dimensional lumber (minimal cuts!) (part 1)
Вставка
- Опубліковано 28 тра 2020
- Full bill of materials at my blog:
www.summet.com/blog/2020/05/2...
I demonstrate how to build the support structure for an 8x8 play structure using dimensional lumber (no cuts for the basic structure, but you are going to need a saw for corner braces and to fit your flooring - see part 2)
Part 2: • Fancy Corner Braces & ... - Навчання та стиль
This is the easiest to understand tutorial I've watched so far. Thank you!!
I'd like to see till the end. Finally a video did not use unnecessary fancy attachments
And no nonsense annoying music makes it easy to focus
you are a very good teacher---excellent video, thank you
Great job explaining the steps we built this plan this weekend went great! I’m doing more simple railings but love the benches.
Glad to hear it was useful to you!
G8
Y8
Exactly what I was looking for.... Thank you
This is a great video! I’m just so confused 🧐I’m a new single mother w 3 boys snd wanting to make this for them for a zip line. I just dk the builders lingo. I will keep watching and hope I just get smarter watching videos 😅
I am also starting on a tree house like this, I would be glad to help with any questions you have if you still plan on building it.
This is great, it’s just what I was looking for. I’m going to use it to help me do one in my yard for my girls. Thank you.
This is a nice video, thank you for posting. I would suggest putting the 4 x 4's on some kind of concrete though. Even your standard pressure treated lumber is more resistant to rot and termites, that is only up to a certain point. The lumber is only treated on the outside, so a treated post in the ground is still susceptible in the middle to rot and termites. Just a thought. It is good to see you working with your son. That is awesome.
I placed concrete in the bottom of the holes @5:27 in the video. Also, my 4x4's are rated for direct burial (the 2x6s and 2x8's are "above ground only" ECL2 pressure treated).
@@summetj Ok, if they are rated for direct ground then I stand corrected. Thanks.
Immensely helpful. Thank you.
You're welcome!
Thank u for ur help
Hi jay, I just saw your video. I was very impressed by your descriptions and thoroughness. After some time has passed, would you have done it differently?
Only change I'd have made would be staining the corner braces the same color as the rest of the wood supports.
@@summetj Great job again.
Thank you, this has been one of the most helpful videos for planning my project. One question - I'm planning an 8 * 8ft platform ~6ft off the ground, with a simple structure on top (stud walls and a pent roof, nothing fancy). Do you think 4*4" posts will still be sturdy enough, or should I use 6*6" posts?
Walls and a roof will probably double your total weight. I would suggest using 6x6s. Another advantage of that is that you could cut a 1.5 inch slot into them to rest the 2x10 on. Then you could get away with only a single lag bolt to hold them in place, and the weight would not be supported by the lag bolts.
@@summetj Thanks for the input, sounds like 6*6 is the way to go. I also like the idea of a notch to rest the support beam on - but I'm curious why you suggest a 1.5 inch slot for a 2 inch beam... wouldn't you cut it 2 inches deep so it supports the whole thing?
@@mikedenby6771 Dimensional lumber is tricky. 2x4 is actually 1.5x3.5 for example. Look up actual size charts for dimensional lumber.
Ive always wanted a treehouse but our trees are to small
Thank you for this video! Is there a structural concern to using 2 x 8s on all four sides in order to conceal the edges of the deck boards?
The 2x6's on the side are holding up the last foot of deck board. You can place a 2x8 there instead, but if you want the deck board to be below the top of the 2x8, you would need to also add a "ledge" (of a 2x4 for example) for the ends of the deck boards to rest upon) inside of the 2x8.
@@summetj thank you so much!
What software are you using for planning.
The CAD program is called OpenSCAD.
Can you upload the code for openscad or the plan on your blog?
I posted it at the bottom of my blog page:
www.summet.com/blog/2020/05/29/build-an-8x8-play-structure-with-dimensional-lumber/
(However, it is only a mockup/visualization of the bottom level, and does not include the benches or ladder.)
@@summetj thank you
Great tutorial. To clarify, did you use 4 2x8s for the perimeter? It showed only 2 when you were describing the materials. Thanks.
You can get a full set of materials here: www.summet.com/blog/2020/05/29/build-an-8x8-play-structure-with-dimensional-lumber/
There are 2 2x8's for opposite sides of the parameter (which hold up the 2x6 joists) and the other two sides of the parameter are 2x6's bolted to the upright 4x4's. (Note that the 2x6's are mounted at joist level, while the 2x8's are mounted the width of a deck board higher, as the deck boards overlap the end 2x6's but butt up to the 2x8's.
@@summetj thanks!!!
@@summetj one last question. Why did you decide to use only 2 2x8s? Why not 4 all the way around?
@@Heypockeyway I only needed the strength to support Joists on two sides. Also because the other two are lowered 3/4 of an inch I felt it would look better to have them a little short than hanging down extra long. The thumbnail of the video shows you one 2x8 and one 2x6 at a corner so you can look at that.
Fantastic vid. keep It up! stay frosty Xd
What exactly is dimensional lumber?
4x4s, 2x4s, 2x6s etc... The stock sizes lumber comes in in the US. I'm also specifically using 8 and 12-ft lengths without cutting them shorter.
how much does this end up costing??
I did not keep a close accounting but it's definitely in the multi-hundreds of dollars. The composite deck boards were probably the most expensive single bit. If you substituted plain wood you could save a decent amount of money there.