Festiva Shift Bushings & Short Shifter
Вставка
- Опубліковано 26 вер 2024
- A complete guide on how to replace your worn out shifter bushings!
I also go over how to build your own shirt shifter (if you have a welder), as well as how to install a pre-made Civic short shifter!
This is a longer video, I have captions when to skip ahead if you just want to see the bushing replacements.
I highly recommend buying the parts in this video from TheFestivaStore.com
This video applies to tons of 80s-90s Ford, Mazda and Kia vehicles, including the Ford Escort, Mercury Capri, Mercury Tracer, etc.
The civic shifter shown in the video is available here. Be sure to look around on ebay, many colors and styles are available.
www.ebay.com/i...
Thanks to www.bensound.com/ for the music sample.
As always, if you have any questions about this video (Or about anything Festiva!) send me a Facebook message using this link:
m.me/willsamet
Or drop a comment below!
And to stay up to date with new projects and parts, be sure to check out the Samet Industries Facebook page!
/ sametindustries
Thanks for watching!
![LIFTING my $300 Ford Festiva! [BRO TRUCK hatchback?]](http://i.ytimg.com/vi/PYvPo8gvqM0/mqdefault.jpg)
![LIFTING my $300 Ford Festiva! [BRO TRUCK hatchback?]](/img/tr.png)
I did mine 4 days ago. Ordered from the site on the link. Easy to install specially after watching this video. Thanks for sharing.
I found this video AFTER I made a video myself on how to do this haha! great segment on the short shifter
You should have used a masking tape to tape the nut before putting the linkage in place so it does not keep dropping. remove the masking tape after tightening the bolt
Love the thumbnail and thanks for the educational video. I know I hate being hit by the shifter while sitting in the passenger seat.
Quiero cambiarlo al español quiero cambiar a español
I just did replaced the bushings in my Festiva, today. I used the solid bushings. I don't recall how many times I dropped that nut, but I'm sure the whole neighborhood heard me cussing.
Ordered these a while back and got them installed. They really improved my shifter. Thanks
Thank you so much for this video! Already got all the parts ordered and can’t wait to fix the floppy shifter
Gracias por la musiquita cuando enciendes el esmeril😂 buen vídeo.
😂 Gracias
The " other wise it will smack you in the head" statement seems to come from experience.
Time for a laugh! Instead of grinding off the welded shaft up front and replacing it with a bolt, I put some small zip ties on either side of the tee to tighten up the joint. It works fairly well. Lol
MUY BUEN VIDEO AMIGO , GRACIAS
I'm not going to lie, I thought that was a floorboard of my blue festiva at first lol
Hi sir its a good video for me.
Hey!
Just recently picked up an 89 5 speed. Previous owner stated that the transmission is such in 1st gear. After getting it home and up on stands I can see someone has already changed it all the bushings in the linkage. Shifter is really tight and won't shift to neutral. Clutch engages and disengaged as it should... any idea what could cause it to be bound up like that?
Huge thanks for all your videos, I have a long way to go on this little project!
she's a beaut!
B A S E D
Nice shoes 25:00
Thanks, my son gave them to me
Anyone have a source for the lower nylon bushing that the shifter ball fits into?
I sourced the last ones on earth a few years ago, they are no longer available sadly.
shouldn't there be a shield on the exhaust section below the shift rod/linkage union? That closer proximity to the pipe has the potential to cook those new bushings. Probably one reason the Civic rod uses bearings
From the factory the entire exhaust is shielded, but the aftermarket units are not
@@SametIndustries they are transferable?
Not easily
The part that the shifter linkage bolt to by the transmission my boot has come off and I can move it back about 2 inches what is that part and is that broke
That's the actual shifter, moving it in and out is what shifts the gears. The boots tear often, but are very difficult to replace.
Hello! I know this is late but I got myself the Civic Shifter For my festiva. With it was the 2 small bearings will it be enough to close the gaps? I have not tried installing it yet but seeing the video it felt like the 2 bearings are not enough to close the gaps. Thanks!
You will need some little spacers to fill the gap with the bearing style civic shifters
@@SametIndustries Got it thanks! Hopefully those 2 mini bearings that i got with the short shift would close the gap
Is the replacement bolt for the pin a long or short bolt from the festivals store?
I pretty sure it's the long
didn't do the stabilizer retainer bolt?
I covered it but didn't take it off, as it had already been replaced
@@SametIndustries no i mean the additional bolt to hold the retainer plate in place
the Festiva store has 2 bolts, longer and shorter version, which one is replacement for the one that you grinded? thanks
Long bolt
Do I Need Both Long And Short Shifter Bolts ? What's The Difference Other Than Length.
You need the long one to replace the pin.
The short one is just to replace the shifter side bolt if you lose it
probably a dumb question, how is it making a short shifter if you’re adding length to the shifter?... i’m new to this. a bit confused. thanks
The full name is "Short Throw Shifter". The 'throw' is how far forward or backwards the shifter must go to actually switch gears.
By extending the bottom, we are effectively moving the pivot.
So originally, let's say the bottom needed to move 1 inch to engage the gear, and the top had to move 4 inches.
If you move the pivot point, now you only have to move the top 3 inches forward to move the bottom one inch.
Let me know if that helps!
@@SametIndustries i totally get it now. thanks. appreciate you guys doing in-depth videos on the festiva. just rewatched Fun With Dick and Jane a week ago and learned of this vehicle and have been shopping for one. thanks to you guys i’m feeling confident on locking one down and working on it haha.