Classic comic Deadpool had red wristbands back then. Thats why they are what they are. The sasquatch wave Deadpool does have black wristbands if you want to swap em though.
Deadpool seems to be the poster child of "expectations are met, so let's now have fun." Yes, Deadpool is a reused mold and yes all the weapons are reuse, but the fact that they included every sensible accessory means we can't complain about it. If things are missing AND we get all the reuse, then that sucks. But this is a Deadpool figure that doesn't really leave you wanting for anything more. And the price isn't bloated. So yeah, if you make a figure and it checks all the boxes, then I see nothing wrong with including goofy accessories so long as they aren't gouging the price for it.
Back in 2016 the Juggernaut BAF wave Deadpool was top of my want list, I didn't find it until 2017 and it became the first figure in my Marvel Legends collection. As time has gone on its safe to say it's far from perfect, from the body mold to the masked head sculpt being a bit off, but its based on one of my favorite comic runs and it's still the figure that got me into this line. That said, I'm pretty tempted by this new version given the new body and accessories, and like you said it works as a 'generic' look for Deadpool.
Damn I wish they would use all these articulation points for all the main characters and for the army builders like hydra aim or the bad guys they went with bob body. I know all fans would appreciate that.
The Marvel Legends Retro deadpool has the same katanas, but the handles are a much darker blue, so I'll be swapping the swords the moment I get this deadpool out of the box.
Pretty sure thats the same head sculpt from the retro cardback version, I've been wanting them to do one with the early 90s longer black parts surrounding his eyes.
This actually looks good. I'm not getting it but I can see the quality in the set. I hope they keep delivering like this! Amazing review, cool to have you post on a Sunday
Hot take: I think the RYV body mold is MUCH better for Deadpool than it is for Spider-Man. For my money, the Amazing Fantasy body mold is (easily) THE best body mold for Spider-Man while the RYV body mold is damn near perfect for Deadpool 1.) The first issue and most visually apparent issue is height; even at his tallest as a fully grown adult, Spider-Man is only 5'10" while Deadpool is 6'2". The RYV body mold is actually quite tall relative to other body molds and is pretty close to the Captain America body mold. And how tall is Captain America??? 6'2"! Should 5'10" Spider-Man be the same height as 6'2" Captain America? Nope, but 6'2" Deadpool should. Therefore, the RYV body mold is MUCH more in scale for Deadpool than Spider-Man 2.) The proportions of the RYV body mold make more sense for Deadpool, while the proportions for the Amazing Fantasy body mold make more sense for Spider-Man. Despite being taller, the RYV body mold has smaller shoulders that give the figure a slightly lanky silhouette, while the Amazing Fantasy body mold has (relatively) bulkier shoulders that give a more powerful silhouette. Which character has the strength to lift 10 tens and which character only has very slight super strength??? Therefore Spider-Man should look a little bulkier/more intimidating than Deadpool in terms of proportions 3.) While not quite as agile as Spider-Man, Deadpool is still a VERY agile character, so it's not weird/wasteful for a Deadpool figure to have a lot of articulation the way it would be if Hasbro randomly decided to give a character like Whirlwind crazy articulation. If you look up Deadpool when he's drawn by artists like Ed McGuinness or Alvin Lee, it's clear that Deadpool should be able to get into crazy poses
@@SageBengal4382 That would be pretty cool (it's the best Marvel Legends Spider-Man IMO), but Marvel Legends usually doesn't do straight-up rereleases with zero changes I'll do you one better though: I have a feeling that Hasbro will eventually release a solo Spider-Man on that Amazing Fantasy body that's based more on John Romita Sr.'s look for the character (lighter/baby blue, Romita Sr.'s iconic eye/mask design, Romita Sr.'s version of the spider chest symbol, etc.) as opposed to the more Steve Ditko look of the Amazing Friends Spider-Man The timing is perfect for it. Not only is John Romita Sr. largely still considered THE best/most iconic Spider-Man artist, but he sadly passed away this year. Hasbro could market it as a tribute to him
@@raymondjones5909 5'10" isn't short, it's just not massive. And if an artist does happen to draw Spider-Man super tall, then that artist is incorrect and is drawing Spider-Man off-model. These are canonical heights that are published both in handbooks/encyclopedias and in Marvel's own character bibles provided to their staff artists. Drawing Spider-Man to be 6'5", for example, would be just as incorrect as coloring him with red hair because both go against canonical facts about the character
Excellent review, Unparalleled!!! It definitely looks like a fun set & love that DP is on the RYV body, Bob looks great, too!!! I can't wait to get this set!!!
Looks awesome! I didn’t pick him up because I got the 2018 one a week before this was revealed. If I can find a good price, I’ll defo get it sometime in the future
Personally, the only gripes I have is there’s no holsters or lil Sack hood (besides the re-use that looks kinda odd imo ) but personally I might just color match my juggernaut wave DP, (that I lov ) and use his holsters as well. However mold wise, I honestly think it works great for Wade even better than Spidey tbh and I love my RYV. I’m just really excited to get my hands on this guy in October!
This new marvel legends figure deadpool man it's so sick it's the marvel legends figure of deadpool who maded hasbro the 2 pack amazing the accessories perfect, and hydra Bob fantastic I can't wait to getting this 2 pack and I am so happy and proud for you because you have it the best deadpool figure and the best 2 pack of 2023.
Im so glad they went with the good proportions for the shoulders on this deadpool. On daredevil they did a weird ass combination of ryv spidey and retro spidey so he had really wonky proportions. This is fully ryv spidey
wrist cuffs should have been black, especially to combine with the boot ones. Are they separate pieces? didn't get that part. And how easy is it to paint black on red? asking for a friend 😅
A good black can be painted over almost anything. But personally it doesn’t bother me enough to change. Just make sure you find the right kind of paint 👍
For someone like me who didn’t have either of these bucks in their collection, I’d say this is the ultimate Deadpool package and it really delivers along with all the accessories so I for one love my set! P.S. My girlfriend got it for me :))
I’m happy I never picked up the 80 anniversary Deadpool. It look great but I didn’t like the right red belt strap on it. So in short, I’m happy I’ll be getting this Deadpool soon, plus all those accessories, especially the lightsabers.
this looks awesome and i have been waiting so long for a set like this - i cant wait to buy this at retail soon? i mean, i checked HASBRO pulse, but this is SOLD OUT for regular people?, but im sure that's just temporary right lol? great review!
Unfortunately this was a comic con exclusive before it became available briefly on Hasbropulse, if it’s sold out then I’m afraid you’re out of luck unless you’re willing to pay the insane prices for it on eBay
They been doing lot of retro figures lately, wish they would do Hydra properly with the old school baggy clothes and jackets instead of rereleasing the modern style hydra look . Its understandable for Bob because he's not a classic character, but the army builders need a classic update!
@@UnparalleledUniverse If it were more modern I would totally agree with you. But I think this is more classic Liefeld Deadpool in costume design and he wore the longer red gloves with the wrist cuffs. You could always swap with the Sasquatch wave Deadpool's cuffs.
Is the Bob figure slightly taller than the Deadpool figure? It looks like in the video. I remember Bob being shorter than Deadpool in the comics, but I might be wrong though.
If Hasbro does X-Force Deadpool again, for the love of God, please put that dang X-harness on him finally. The Mafex one is SO good and a big reason is becoming they finally got his chest and sword holster right
I can't be the only noticing his GLOSSY paint job on his torso, right? It's such a poor effort from Hasbro and so frustrating just to look at and somehow it seems like nobody cares about like it's no big deal, especially for its hefty price, we deserve to expect much more!
Here from 9months in the future to tell you it’s because it doesn’t matter. You’re reaching for something to cry about and that’s the worst kind of collector.
@@Uncleoora2800 no, I'm reaching for something that's worth my money. Nothing is wrong with respecting my hard-earned and spend it well. I'd rather spend $60 for a good figure than $30 for a piece of unfinished, trashy product by Hasbro
So, the colored ninja weapons are supposed to be a reference to the ninja turtles, and the Lazers words are obviously supposed to be lightsabers, but then there's the bazooka. what could a pastel pink explosive device be a reference to 🤔 yeah, it a barbieheimer bazooka
17:15 This should not at all be necessary but you can improve the movement on the Vulcan, RYW and any other weak butterfly made recently (Movie Spider-Man 3 pack). In the case of RYW it's not even really necessary to boil and remove the arms (though that will work best). You can actually just push them really hard until they reach end range. An anoying thing is that any newer Pizza Spider-Man buck also has the annoying extra notch thing so they went in to an old outdated buck and made it worse on purpose, without improving many of the complaints peopple have had with that buck over the years and they actually once improved the shoulders with Vulture and then never used those shoulders again, same with Shang Chi on the Sunfire buck Btw.
Thanks for the review Wade. The red hand bands are a sore to the eye. The silly accessories are only there to kinda justify the value. Overall Hasbro gets a "C+" for this set.
These are great characters, but can't keep buying the same re-use bodies. Toy terminologies no good when the average 🤓 knows bucky cap mold fiasco gave me anxiety re-use,is not a $Elling point. To new collector get it! But once you know,you know. Wade unparalleled as always, can't wait for Odious.
I’m a simple man I see unparalleled universe I click
Facts
Dead meme
@@DC4LHO33 I’m not even trying to be funny I’m being honest
Same😅
This is 🔥 brother Wade! Yeah, I am definitely in on this set! 🤓✨✨✨
Yo! What’s up bro! I hope all is well! Definitely a must have set if you are a Deadpool fan!
Loved the TMNT reference on the weapon colours.
*Easily the best Marvel Legends Deadpool ever*
Easy!
Classic comic Deadpool had red wristbands back then. Thats why they are what they are. The sasquatch wave Deadpool does have black wristbands if you want to swap em though.
Thanks for the shout out! (agentgomez here)
Hell yeah! No problem dude! Thanks for the hook up!
@@UnparalleledUniverse bro I want like 5 bobs now
I’m keeping 2 I ordered from HASBRO
Deadpool seems to be the poster child of "expectations are met, so let's now have fun."
Yes, Deadpool is a reused mold and yes all the weapons are reuse, but the fact that they included every sensible accessory means we can't complain about it. If things are missing AND we get all the reuse, then that sucks. But this is a Deadpool figure that doesn't really leave you wanting for anything more. And the price isn't bloated.
So yeah, if you make a figure and it checks all the boxes, then I see nothing wrong with including goofy accessories so long as they aren't gouging the price for it.
you can peg the boxing glove into the wrists lol
Back in 2016 the Juggernaut BAF wave Deadpool was top of my want list, I didn't find it until 2017 and it became the first figure in my Marvel Legends collection. As time has gone on its safe to say it's far from perfect, from the body mold to the masked head sculpt being a bit off, but its based on one of my favorite comic runs and it's still the figure that got me into this line. That said, I'm pretty tempted by this new version given the new body and accessories, and like you said it works as a 'generic' look for Deadpool.
Damn I wish they would use all these articulation points for all the main characters and for the army builders like hydra aim or the bad guys they went with bob body. I know all fans would appreciate that.
The Marvel Legends Retro deadpool has the same katanas, but the handles are a much darker blue, so I'll be swapping the swords the moment I get this deadpool out of the box.
cant wait to get mine!
Glad the back comes off
I’d seek out that Deadpool by itself & do a little kit-bashing.
Posing skills are unmatched 💪🏼👌
Pretty sure thats the same head sculpt from the retro cardback version, I've been wanting them to do one with the early 90s longer black parts surrounding his eyes.
It's the head from the Sasquatch wave Deadpool.
Looking forward to this 2 pack for sure.
This actually looks good. I'm not getting it but I can see the quality in the set. I hope they keep delivering like this! Amazing review, cool to have you post on a Sunday
Hot take: I think the RYV body mold is MUCH better for Deadpool than it is for Spider-Man. For my money, the Amazing Fantasy body mold is (easily) THE best body mold for Spider-Man while the RYV body mold is damn near perfect for Deadpool
1.) The first issue and most visually apparent issue is height; even at his tallest as a fully grown adult, Spider-Man is only 5'10" while Deadpool is 6'2". The RYV body mold is actually quite tall relative to other body molds and is pretty close to the Captain America body mold. And how tall is Captain America??? 6'2"! Should 5'10" Spider-Man be the same height as 6'2" Captain America? Nope, but 6'2" Deadpool should. Therefore, the RYV body mold is MUCH more in scale for Deadpool than Spider-Man
2.) The proportions of the RYV body mold make more sense for Deadpool, while the proportions for the Amazing Fantasy body mold make more sense for Spider-Man. Despite being taller, the RYV body mold has smaller shoulders that give the figure a slightly lanky silhouette, while the Amazing Fantasy body mold has (relatively) bulkier shoulders that give a more powerful silhouette. Which character has the strength to lift 10 tens and which character only has very slight super strength??? Therefore Spider-Man should look a little bulkier/more intimidating than Deadpool in terms of proportions
3.) While not quite as agile as Spider-Man, Deadpool is still a VERY agile character, so it's not weird/wasteful for a Deadpool figure to have a lot of articulation the way it would be if Hasbro randomly decided to give a character like Whirlwind crazy articulation. If you look up Deadpool when he's drawn by artists like Ed McGuinness or Alvin Lee, it's clear that Deadpool should be able to get into crazy poses
Reeeaaally hoping they'll rerelease the Amazing Friends Spider-Man on a solo-card :(
@@SageBengal4382 That would be pretty cool (it's the best Marvel Legends Spider-Man IMO), but Marvel Legends usually doesn't do straight-up rereleases with zero changes
I'll do you one better though: I have a feeling that Hasbro will eventually release a solo Spider-Man on that Amazing Fantasy body that's based more on John Romita Sr.'s look for the character (lighter/baby blue, Romita Sr.'s iconic eye/mask design, Romita Sr.'s version of the spider chest symbol, etc.) as opposed to the more Steve Ditko look of the Amazing Friends Spider-Man
The timing is perfect for it. Not only is John Romita Sr. largely still considered THE best/most iconic Spider-Man artist, but he sadly passed away this year. Hasbro could market it as a tribute to him
Spiderman is tall depending on the artist
@@raymondjones5909 5'10" isn't short, it's just not massive. And if an artist does happen to draw Spider-Man super tall, then that artist is incorrect and is drawing Spider-Man off-model. These are canonical heights that are published both in handbooks/encyclopedias and in Marvel's own character bibles provided to their staff artists. Drawing Spider-Man to be 6'5", for example, would be just as incorrect as coloring him with red hair because both go against canonical facts about the character
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣@@juansanchez209 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Thanks for the review
Excellent review, Unparalleled!!! It definitely looks like a fun set & love that DP is on the RYV body, Bob looks great, too!!! I can't wait to get this set!!!
Let’s goooo!! This looks amazing can’t wait to get it ,AMAZING review by the way!🔥🔥plus does the website you use ship to Canada?
I’m excited for this and definitely need a 2nd Deadpool so he can me my travel/random places figure.
now they need to give us Lady Deadpool using the Target Exclusive Black Widow Deluxe Body.
Looks awesome! I didn’t pick him up because I got the 2018 one a week before this was revealed. If I can find a good price, I’ll defo get it sometime in the future
Is it just me or did I see Bob just chilling there while U were doing Deadpool’s articulation😂
This channel has a good energy no one else has, love it and keep it up bro
same head as the first apperence deadpool
I have my Deadpool posed in the Obi-Wan Lightsaber pose.
Personally, the only gripes I have is there’s no holsters or lil Sack hood (besides the re-use that looks kinda odd imo ) but personally I might just color match my juggernaut wave DP, (that I lov ) and use his holsters as well.
However mold wise, I honestly think it works great for Wade even better than Spidey tbh and I love my RYV.
I’m just really excited to get my hands on this guy in October!
Bc personally the mix of this guy and my Juggernaut wave DP is like the perfect figure, just might make a bit of a kitbash 🤔
Im pretty sure the boxing glove can also go on dp
Awesome grab dude 🤙🏻
Can't Wait For This Set Will Finally Be Able To Have Deadpool In The Collection
This new marvel legends figure deadpool man it's so sick it's the marvel legends figure of deadpool who maded hasbro the 2 pack amazing the accessories perfect, and hydra Bob fantastic I can't wait to getting this 2 pack and I am so happy and proud for you because you have it the best deadpool figure and the best 2 pack of 2023.
Word to Waaade!
This is the only marvel legends I’ve gotten in a while
I’m pretty sure I saw the light saber thingy from the iron man doctor doom figure, he did come with a light saber sword but I’m not sure if it’s this
Im so glad they went with the good proportions for the shoulders on this deadpool. On daredevil they did a weird ass combination of ryv spidey and retro spidey so he had really wonky proportions. This is fully ryv spidey
Thanks for this review bro
wrist cuffs should have been black, especially to combine with the boot ones. Are they separate pieces? didn't get that part. And how easy is it to paint black on red? asking for a friend 😅
A good black can be painted over almost anything. But personally it doesn’t bother me enough to change. Just make sure you find the right kind of paint 👍
@@garf7298 thanks dude!
The other 2 references in the accessories are Nerf Mr. Beast & Star Wars.
Need to track this pack down
I'm selling mine let me know if you're interested if you haven't got it yet
For someone like me who didn’t have either of these bucks in their collection, I’d say this is the ultimate Deadpool package and it really delivers along with all the accessories so I for one love my set!
P.S. My girlfriend got it for me :))
Oh yeah, if this is your first time getting either buck then its even more awesome!
I'm waiting for redos for all of the grey/black uncanny xforce figs.
For real! Hasbro needs to get on that.
I’m happy I never picked up the 80 anniversary Deadpool. It look great but I didn’t like the right red belt strap on it. So in short, I’m happy I’ll be getting this Deadpool soon, plus all those accessories, especially the lightsabers.
Get the Sasquatch wave Deadpool. It's the 80 Anniversary Deadpool but better. Black and red. Different strap.
Awesome 2 pack like it❤
I’m gonna put him in the mezco bear and reindeer lol
Top 10 Best Marvel Legends Deadpool Figure Ever
Is there even 10
Aw im sold
What shield is that for captain America?
@PjangoStudiosChuchin Looks like Toybiz Series 1.
🔥🔥
i still say they should have used the vulcan buck for deadpool
this looks awesome and i have been waiting so long for a set like this - i cant wait to buy this at retail soon? i mean, i checked HASBRO pulse, but this is SOLD OUT for regular people?, but im sure that's just temporary right lol? great review!
Unfortunately this was a comic con exclusive before it became available briefly on Hasbropulse, if it’s sold out then I’m afraid you’re out of luck unless you’re willing to pay the insane prices for it on eBay
They been doing lot of retro figures lately, wish they would do Hydra properly with the old school baggy clothes and jackets instead of rereleasing the modern style hydra look .
Its understandable for Bob because he's not a classic character, but the army builders need a classic update!
The wrist cuffs look better red, like the comics.
I disagree
@@UnparalleledUniverse If it were more modern I would totally agree with you. But I think this is more classic Liefeld Deadpool in costume design and he wore the longer red gloves with the wrist cuffs. You could always swap with the Sasquatch wave Deadpool's cuffs.
Is the Bob figure slightly taller than the Deadpool figure? It looks like in the video. I remember Bob being shorter than Deadpool in the comics, but I might be wrong though.
I always thought Deadpool was a smaller dude, the scale works for me.
If Hasbro does X-Force Deadpool again, for the love of God, please put that dang X-harness on him finally. The Mafex one is SO good and a big reason is becoming they finally got his chest and sword holster right
I can't be the only noticing his GLOSSY paint job on his torso, right? It's such a poor effort from Hasbro and so frustrating just to look at and somehow it seems like nobody cares about like it's no big deal, especially for its hefty price, we deserve to expect much more!
"Superhero proportions" are dumb and outdated
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣@@juansanchez209 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Cause it really isnt a big deal. Would it be more ideal if it wasnt glossy? Sure yea. But its not a big deal lmao
Here from 9months in the future to tell you it’s because it doesn’t matter. You’re reaching for something to cry about and that’s the worst kind of collector.
@@Uncleoora2800 no, I'm reaching for something that's worth my money. Nothing is wrong with respecting my hard-earned and spend it well. I'd rather spend $60 for a good figure than $30 for a piece of unfinished, trashy product by Hasbro
TMNT 2 pack?
This body mold more suited too Deadpoon than Spiderman
Can I have the details of the cable custom head for the amazing yamaguchi? That looks great! Thanks!
I got it from Custom Chef on IG
instagram.com/customschef?igsh=MWQ1ZGUxMzBkMA==
Headsculp aint new same one that was on sasquatch wave DP and retro carded DP
Damn I hope this ships soon since it seems like these websites are getting it early
DP should have come with a masked modern head too.
The arm cuffs are supposed to be a brown
They look better red IMO. I'm not a stickler for accuracy though, I think it's better to go for what's more aesthetically pleasing IMO
I disagree with both of y’all, they look best in black to me. Haha
@@UnparalleledUniverse yeah they might but I just wonder how the brown in the promo pics became red.
Maybe the “lightsabers” are a tease for Kidpool? 🤔
So glad you mentioned the wrist cuffs. Awesome review as always!
So, the colored ninja weapons are supposed to be a reference to the ninja turtles, and the Lazers words are obviously supposed to be lightsabers, but then there's the bazooka.
what could a pastel pink explosive device be a reference to 🤔
yeah, it a barbieheimer bazooka
17:15 This should not at all be necessary but you can improve the movement on the Vulcan, RYW and any other weak butterfly made recently (Movie Spider-Man 3 pack). In the case of RYW it's not even really necessary to boil and remove the arms (though that will work best). You can actually just push them really hard until they reach end range. An anoying thing is that any newer Pizza Spider-Man buck also has the annoying extra notch thing so they went in to an old outdated buck and made it worse on purpose, without improving many of the complaints peopple have had with that buck over the years and they actually once improved the shoulders with Vulture and then never used those shoulders again, same with Shang Chi on the Sunfire buck Btw.
Swords are blue cause theyre a tmnt reference
I am aware of that, thank you!
Bro, the black part of Mezco Deadpool it's ok? It is like Hot Toys or not?
Watching it as I write this... did he mention the TMNT weapons?
🙃
@@UnparalleledUniverse glad you did... but they had to tell you? psh lol.. my buddy spotted it the second it was live on hasbro pulse
The Deadpool is cool...but Hasbro needs to stop with the same old accessories.
Deadpool stole TMNT weapons. LoL
Figuregrail currently has 0 stock for Marvel Legends in general.
please review the movie shf Deadpool 🙏🙏🙏🙏
Ok that fade from Deadpool figure into Spider-Man and Daredevil was smooth brother
Hahaha thanks! I put some work into that!
@@UnparalleledUniverse oh your welcome and I can tell but it was smooth man should use that more really like it
Hi from Wisconsin) can I ask do u only do marvel stuff or other but have u reviewed ur figure and could u maybe do ultraman plss😊😊🥺🥺
that head scuplt isnt new
I don't understand why they gave him kids weapons... Wtf was that? Is Marvel trying to erase the fact that he is a killer? A murderer? Not a clown.
Marvel comics have been doing that to Deadpool for about 15 years haha
Thanks for the review Wade. The red hand bands are a sore to the eye. The silly accessories are only there to kinda justify the value. Overall Hasbro gets a "C+" for this set.
I'm selling my Deadpool 2 pack brand new in the box, hmu if anyones interested
first
hydra symbal is a female skeleton cause the boobies tell me so lol
These are great characters, but can't keep buying the same re-use bodies. Toy terminologies no good when the average 🤓 knows bucky cap mold fiasco gave me anxiety re-use,is not a $Elling point. To new collector get it! But once you know,you know. Wade unparalleled as always, can't wait for Odious.