"Neighbors love him!" I usually let my engines sit for a few seconds to let the oil pressure stabilize and then keep the rpm low while driving until it's warm.
Our country is pretty much goin thru lockdown right now so he probably can't go out because of it. Edit : Sorry the video was 1 year ago so it should be around the total lockdown when covid first started to spread.
@@DrInsane76 Absolutely not. You think that revving a bike that potentially isn’t lubricated and heated completely is a good way to bring it to operating temperature?
@@watchmelowsidekappa9184 I do think warming it up isn't necessary anymore. Most bikes now run on fuel injection and ECU would ramp up RPM a little bit during cold start to make sure engine gets to optimal operating temperature faster which in turn coat moving parts with engine oil. Just turn on the bike, wait 10 seconds and cruise off in low RPM. Don't put too much throttle in. Perhaps unrelated but, I used to warm up my car per the usual tradition too but I noticed my engine vibrate considerably lesser compared to when I warmed it up for 5 to 10 minutes. People usually warm up engines back in the day because things ran on carburetor.
@@leanderfernandes9286 yes the kill switch engages and disengages the ecu which in long term will her it if you are not switching it on and off properly. Give it a second or two before starting the motorcycle
@@ikramzamri nevermind I guess it doesn’t matter. Msp taught me to only use kill switch with turning it off and on but I forgot why. Forsure good to use the kill switch/on switch with turning it on and waiting a second because the ecu needs to prime before starting the engine, at least it’s the heathy route.
@@leanderfernandes9286 youre right. Msp taught me to only use kill switch with turning it off and on but I forgot why. Forsure good to use the kill switch/on switch with turning it on and waiting a second because the ecu needs to prime before starting the engine, at least it’s the heathy route.
"Neighbors love him!"
I usually let my engines sit for a few seconds to let the oil pressure stabilize and then keep the rpm low while driving until it's warm.
hahahha they do!😂
Padu,,..Bast superbike cbr1000rr
Start enjin..baru nak warm up..tetiba sakit perut..bagus ada gajet ni..😁
hahahha kann😂
Love ❤️ Honda’s but My 2004 MV Agusta had this feature
Perghhhh cair tengokk
CERRESIEETEEE IIIUUUUUUU
Muito bonita moto meu maior sonho
Its the beast
banter cook
What happen ?when he press the red button it starts to rev it self i saw that thing also happens when others do press that button what is it?
Something like launch control for bikes.
Or its just a thing for revving the ensigns so it heats faster
It’s an engine rumbler
Its just a feature so that the engine heats faster to running temp
It controls the throttle electronically
Just speeding up the fuel injection or opening the intake using some servo motor
Зачем эта кнопка?
That's cool. Did you ad that?
Yes sir. Its a Woolich Race Tools’ feature
I want that button!!!!!
how u do that by pressing button
Woolich race controls. That button functions as a pit limiter, engine warm up, launch control. The works
Doakan saya smoga kebeli🙏
amin
Just ride with it man,than it will warm up good. ;-)
Our country is pretty much goin thru lockdown right now so he probably can't go out because of it.
Edit : Sorry the video was 1 year ago so it should be around the total lockdown when covid first started to spread.
Definitely not. Let the bike fully warm itself before riding if you want to preserve the bikes motor.
@@watchmelowsidekappa9184 Idling is the worse kind of warm up m8.
@@DrInsane76 Absolutely not. You think that revving a bike that potentially isn’t lubricated and heated completely is a good way to bring it to operating temperature?
@@watchmelowsidekappa9184 I do think warming it up isn't necessary anymore. Most bikes now run on fuel injection and ECU would ramp up RPM a little bit during cold start to make sure engine gets to optimal operating temperature faster which in turn coat moving parts with engine oil. Just turn on the bike, wait 10 seconds and cruise off in low RPM. Don't put too much throttle in.
Perhaps unrelated but,
I used to warm up my car per the usual tradition too but I noticed my engine vibrate considerably lesser compared to when I warmed it up for 5 to 10 minutes.
People usually warm up engines back in the day because things ran on carburetor.
Ma a cosa serve ?
Why’s your screen black but mines white?
u know u can set it in the settings menu 🤗
This is a cbr 1000rr 2017
This what i searching in google but i dont see anything
What is the price of this beauty 👍✌😎💖🇵🇰
Rana Babar Ali in malaysia, around MYR92,000 and for the woolich setup and tuning around MYR4,000
20 lakhs in India
Buat kt bro tuning tu?
Kat OKSBK brother
@@ikramzamri tq bro
@@lordkane6430 sama2 brother
Exaust name?
Arrow
Pra que isso ?
Apakah ini yg disebut timing kuda? 😁
Beda, ini warmup. Buat manasin motor otomatis kyk di geber" Alus gtu
@@ilhamsatria5609 bedanya apa sama timing kuda? Kan bisa buat manasin juga?
@@Parjuma2 suara nya beda banget. Kalau timing kuda suara ngikut kuda lari. Kalau ini cuma geber alus pol
@@sonofluciferr6440 wakakak oke ini geber alus pol yaa
Nggak pak😂
Знакомьтесь с клавиатурой Gboard! Здесь будет сохраняться текст, который вы копируете.
Bro is it possible to do woolich race tool warm up in 2001 cbr 600f4i??
Bhubesh no sir. It needs a TPS😬
cómo puede ase eso
kapan yaallah punya motor kek gitu☺😔
gua jual 1 rumah dulu, baru ke beli ahaha
Klo luh jual rumah yang b aj mah nggk dapet juga
@@edwianusyoal4791 Dapetlah broo,,,Tapi Pertanyaan Nya, Mau Tidur Dimane?? Dimotor AHAHAHA
@@rdkvlogger132harga nya itu +- 1 M bro keluaran barunya
Jual rrumah sekitaran 300 +-
Bro you gotta use the kill switch
No he doesn’t
What for?
@@leanderfernandes9286 yes the kill switch engages and disengages the ecu which in long term will her it if you are not switching it on and off properly. Give it a second or two before starting the motorcycle
@@ikramzamri nevermind I guess it doesn’t matter. Msp taught me to only use kill switch with turning it off and on but I forgot why. Forsure good to use the kill switch/on switch with turning it on and waiting a second because the ecu needs to prime before starting the engine, at least it’s the heathy route.
@@leanderfernandes9286 youre right. Msp taught me to only use kill switch with turning it off and on but I forgot why. Forsure good to use the kill switch/on switch with turning it on and waiting a second because the ecu needs to prime before starting the engine, at least it’s the heathy route.
Kapan iso tuko motor 1000cc
Nabung om
Zx25 wae bos
Nek go kui dalane GK nutot😂😀
GK Kober nganggo gigi 3 up😂🙏🙏🙏
มันคืออะไร
ก็เวลาสตาทตอนเช้าช่วยให้อุณหภูมิคงที่
Editan 😀
Bukan editan itu liat rpmnya naik emang ada tombolnya kok jadi motornya bisa gas gas sendiri
@@Michael-sm2lq canda om canda😀😂
И нафига
👎
are you jelous ?
HA HA jelous bitch
Bitch only got grandma's scooter
Apa lu iri?,hahaha ga mampu beli ya?
Walk away ahlun