this was a very helpful video, will be coming here again as the some parts were a bit difficult to understand, appreciate all the efforts you took in making this video. thanks a lot
@@SCIENTIAPLUS thank you so much, I had to prepare a presentation for topics harmonic indices, I am actually confused about what exactly am I supposed to explain in this topic. It'd be a great help if you gave me some points which should be covered in the explanation.
3:17 Not exactly true. The definition of a linear device/load/component/element/network is not that which draws sinusoidal current when excited by a sinusoidal voltage. The definition is if it satisfies the superposition principle. There are linear loads that draw non-sinusoidal current when excited by a sinusoidal voltage. Example: linear time-variant loads. For some reason in Power Engineering, they say linear loads are those that draw sinusoidal current. But the definition of "linear" based on superposition is consistent with the definition used in Signals & Systems, in Differential Equations for linear ODEs, and in Linear Algebra for linear transformations. So it is clear the definition used in Power Engineering is the one which seems wrong, since it is inconsistent with many other branches of science. If you want to refer to a load that draws sinusoidal current when excited by a sinusoidal voltage, that load is linear time-invariant (LTI). If you want to refer to a load that draws non-sinusoidal current when excited by a sinusoidal voltage, that load is non-LTI (either because it is non-linear and/or because it is time-variant). 4:05 Note: Fourier did not invent the FFT algorithm. 4:57 In a cycloconverter, the fundamental cyclic frequency of the current is not 50 nor 60 Hz. 6:42 Actually, the frequency spectrum consists of two graphs. The one shown in the video was the amplitude spectrum (normalized). The missing graph is the phase spectrum.
woah !! I'd actully love to watch your video, in much simpler language and bit more understandable. i needed some help with understanding the term harmonic indices and what it covers.
Hello sir, Thankyou so much for this wonderful video, I would like to know that as at 10:40 you mentioned that THD for current distortion does not give clear vision in comparison with TDD, can you please explain me more, as i m doing a project and in my project tdd is under limit but thdi is 48 percent, will it be acceptable according to ieee standards?
Hello, I just want to ask, what is order in harmonics? And why every time the order comes up, the multiplier of the frequency goes up according to what order they're in?
item 1,2,3,4,7,10,11 rather this is the correct control tolerance specification or not ? I am not sure it that any tolerance control tolerance specification for item 5,6,8,9 ? Parameter Calculation method Specification 1)THC(A)
this was a very helpful video, will be coming here again as the some parts were a bit difficult to understand, appreciate all the efforts you took in making this video. thanks a lot
Hello Komalika. It is a pleasure to help. If you have any doubt, just tell me.
@@SCIENTIAPLUS thank you so much, I had to prepare a presentation for topics harmonic indices, I am actually confused about what exactly am I supposed to explain in this topic. It'd be a great help if you gave me some points which should be covered in the explanation.
Very good explanation, even for people who are not familiar with the topic
Thank you for wonderful Technical session
Thank you for creating the best explanation.
Thanks a lot for watching it and for your positive feedback!
Very good demonstration
Thanks for detailed explanation. Could you explain the harmonic
In 3Ph. Inverter transformer
3:17 Not exactly true. The definition of a linear device/load/component/element/network is not that which draws sinusoidal current when excited by a sinusoidal voltage. The definition is if it satisfies the superposition principle.
There are linear loads that draw non-sinusoidal current when excited by a sinusoidal voltage. Example: linear time-variant loads.
For some reason in Power Engineering, they say linear loads are those that draw sinusoidal current. But the definition of "linear" based on superposition is consistent with the definition used in Signals & Systems, in Differential Equations for linear ODEs, and in Linear Algebra for linear transformations. So it is clear the definition used in Power Engineering is the one which seems wrong, since it is inconsistent with many other branches of science.
If you want to refer to a load that draws sinusoidal current when excited by a sinusoidal voltage, that load is linear time-invariant (LTI). If you want to refer to a load that draws non-sinusoidal current when excited by a sinusoidal voltage, that load is non-LTI (either because it is non-linear and/or because it is time-variant).
4:05 Note: Fourier did not invent the FFT algorithm.
4:57 In a cycloconverter, the fundamental cyclic frequency of the current is not 50 nor 60 Hz.
6:42 Actually, the frequency spectrum consists of two graphs. The one shown in the video was the amplitude spectrum (normalized). The missing graph is the phase spectrum.
Hello Alejandro, thanks a lot for your interesting comments! I really appreciate them.
woah !! I'd actully love to watch your video, in much simpler language and bit more understandable. i needed some help with understanding the term harmonic indices and what it covers.
Is connecting line to line prevents zero sequence by not using grounded current carrying conductors
Hello sir, Thankyou so much for this wonderful video, I would like to know that as at 10:40 you mentioned that THD for current distortion does not give clear vision in comparison with TDD, can you please explain me more, as i m doing a project and in my project tdd is under limit but thdi is 48 percent, will it be acceptable according to ieee standards?
Great video information 👍❤ thank you for sharing your knowledge ♥️🇵🇭
Where are you from?
Great video .....
Great video bro
really helpful
Hello, I just want to ask, what is order in harmonics? And why every time the order comes up, the multiplier of the frequency goes up according to what order they're in?
Thanks for this.
Sir.
Can u give excample to reduce harmonic 5th in Vidio using passive filter.
excellent work
Hello. Thanks a lot for your positive feedback!
Nice ❤
Sir can you make a vedio on Asymmmetric cascaded h bridge multilevel inverter with comparison of thd in the basis of low thd and high thd
Thanks
item 1,2,3,4,7,10,11 rather this is the correct control tolerance specification or not ?
I am not sure it that any tolerance control tolerance specification for item 5,6,8,9 ?
Parameter Calculation method Specification
1)THC(A)
nice
Cool
Double like!
If Xavier Renegade Angel was an alpha bro trying to sell you nootropic supplements it would look like this.
Why does that man have a face tatoo
Couse he is conor mcgregor.
@@Spik3One lol
The CGI presenter is extremely off-putting
Wtf