The feedback winding of the coil is open circuit. There is no cure save rewinding, which is very nearly impossible as the wire is similar thickness and delicate nature as spiders web thread.... There's two coils on that one side, drive coil is around 4500 turns, the f/b around 1500 turns of it bifilar wound with the drive winding.... Good luck doing That! Always seems to be Cell coil or Tr coil ESA called it that fails--Proximity to battery probably, tinyest bit of a battery leak and there goes your coil.
@@HighCompressionII which coil/part is needed? My omega 1255 is reading exactly the same, open in 1-2 and 2-3, 2-5. First two measurements are a little lower than yours but in range. Edit: looks like the T coil, part 2420.
My favourite channel
Thanks for videos sir
Very great job. Thank you very much!
Very informative although not clear of what position to put the multimeter in to check readings??
Good informative tutorial.
I wonder what’s giving it a bad reading and if that could be fixed.
The feedback winding of the coil is open circuit. There is no cure save rewinding, which is very nearly impossible as the wire is similar thickness and delicate nature as spiders web thread.... There's two coils on that one side, drive coil is around 4500 turns, the f/b around 1500 turns of it bifilar wound with the drive winding....
Good luck doing That!
Always seems to be Cell coil or Tr coil ESA called it that fails--Proximity to battery probably, tinyest bit of a battery leak and there goes your coil.
@@HighCompressionII which coil/part is needed? My omega 1255 is reading exactly the same, open in 1-2 and 2-3, 2-5. First two measurements are a little lower than yours but in range. Edit: looks like the T coil, part 2420.
Good job sir, i have longines ultronic 6312 and have coil fault. How much will it cost me? Thank you...
Very cool, thanks for sharing this tutorial. The last measures you did was to check if transistor is ok?
Where would I find that movement holder? It seems that it is specially made for ESA 9162 movements
Hi, where can I get the 3D printing drawings for the holder? I think your website doesn't exist anymore? Thanks!
How do I speed up this watch my watch running slow 5 second per days and those spring are very clean and good adjustment
Hello, where can I find the stl file of that coil holder? ;-)
Hello, do you know which type of transistor it is compatible? thank you
Hello, thank you for the Video. Did you repair the watches for money?