THANKS FOR WATCHING -------------- 0:00 KAR98K 1:09 SUPERI 46 2:03 JAK HARBINGER 2:31 JAK INTIMIDATOR 2:54 JAK DECIMATOR 3:18 JAK ATLAS (S3) 3:44 JAK PATRIOT(S3)
As much as I wanted Sledgehammer to have the character block the ejection port when doing a tactical reload, at least they deserves some credit for letting the character put in the correct amount of bullets from the stripper clip for each round fired like in Vanguard compared to MW19
They finally fixed the JAK Patriot into full metal parts instead of 3d printed plastic This can be explained JAK will now produce actual aftermarket metal parts
@@gagejohnathan9641 yes but it already looked like an m9a3 but was an m93r and now it is an m9a3 because of the single shot instead of the three round burst that the m93r had
Makes sense, they didn’t want it and the FTAC Recon to occupy the same niche, the Recon is a spammable .458 while the Beowulf is slow and marksman like
@@bosssoider1854 Yes, they're available, you just have to do two challenges to unlock them, headshots with Pistols and suppressed kills with SMGs respectively.
Did you forget the Hightower Barrel on the M4? It's actually the default barrel for the M16. Knowing this makes me think that the JAK Patriot is an unnecessary addition as you can just use a Hightower Barrel and Demo Percision Stock on the M4 Receiver to make a full auto M16.
And why do you think that the Kar98k sounds awful? Name one reason as to why you think that the Kar98k sounds awful, and what do you want to force Kar98k to do about this situation in order for it to not sound awful without saying they should be forced by you to not exist forever?
@@adityathapa844 no it's vanguard since the stripper clip actually puts the correct amount of rounds in unlike MW2019. Gun wise yeah it's based on mw2019 but the reload is not.
@@antonindufournaud6572 the animation is from mw2019 actually but it is altered (mentioned by devs). Fixing that clipper issue doesn't mean that the whole animation is based on vanguard if u can see the similarity between mw2019' and mw3' animation.
>extractor incorrectly rotates with the bolt >bolt release swings open with each shot >bolt is not rotated all the way when cycling >rounds fall out of the gun when loading individual rounds (????????) E for effort on the kar 98k ig
Kar98k - some errors can be seen, bullet tracks correctly like in Vanguard, should have been wood Superi 46 (CMMG Banshee 4.6mm) - why does this sound better than the AMR9? JAK Harbinger - 50 Beowulf wouldn't really slow down the rate of fire tbh, also the 3D printing is absolutely unnecessary JAK Intimidator - unnecessary 3D printing JAK Decimator - so an MP5KSD with unnecessary 3D printing? JAK Atlas - at least this looks a bit better than the original, I guess JAK Patriot - no need to 3D print everything except for the lower, the full auto is just a replacement of the fire control with an auto sear to allow for full auto
As much as I wanted Sledgehammer to have the character block the ejection port when doing a tactical reload, at least they deserves some credit for letting the character put in the correct amount of bullets from the stripper clip for each round fired like in Vanguard compared to MW19
They finally fixed the JAK Patriot into full metal parts instead of 3d printed plastic
This can be explained JAK will now produce actual aftermarket metal parts
I'm not sure if that's the case i think he used the charcoal camo on it
At least it looks better compared to the og version with the white reinforced plastic,just saying
Its just a camo
Just a paint job, it's still white by default
still white
Whoever animated these 2 new weapons needs a praise . They feel a lot better than early MW3 animations .
Mp9 and hrm animation was made by bearbones
Depends on the guns. Other than that, they’re all pretty darn good
i wanna meme on the atlas's design so bad but the way that plastic material is rendering checks every box perfectly
I mean it turns the AMR9 into its original counterpart from Advanced Warfare, so…
Sledgehammer has a cooking licence now
they dig the kar98k from mw 2019 back....
back to cooking class they go with that damn kar98k (inb4 someone screams muh non-realism in cod)
@RayleeRaven567 I wouldn't surprise if they add a railgun or laser blaster, or smth like that.
@@normalguythe3681 they did bring the mors from aw back
@@RayleeRaven567 ah.
Man these animations never fail to impress me :o
Never failed? What about now?
Bullets falling out of the kar98:
@@cefalopodo5717 bruv they're still on fire
So your expectations are very low
@@OperatorJackYT for someone that fails miserably to compare it will be fire
I’m glad they brought the m9a3 into the game instead of a modded m93r
What?
It's aftermarket.
@@epj0211 the base Renneti in the game is a m93r made to look like a m9a3 because of the three round burst, this aftermarket part makes it an m9a3
@@gagejohnathan9641 yes but it already looked like an m9a3 but was an m93r and now it is an m9a3 because of the single shot instead of the three round burst that the m93r had
JAK Patriot paired with the M203, as it damn well should be.
2:03 that is the AR15 Beowulf?
Yes
Kar98K sounds so crispy i love it
you know these are special forces when the player character pulled the bolt of the kar98k just enough before it would have otherwise pulled out
What camp were you using on the m16 because the after market part usually makes the carry handle white even with the charcoal camo
Hmm those 3D printed guns look so interesting
sledgehammer legit added a 5.56 conversion kit for the 9mm conversion of the m4
finally AMR9
The Intimidator and Decimator kits seem pretty unnecessary to me
Jak Patriot is, without an Abso-fraking-lute doubt, my Most Absolute favorite weapon right here!!!!!
These are SO damn cool
JAK Harbinger seems interesting
50 Beowulf AR
if you played R6 Siege and used Maverick, you will recognize this as the AR15-50
Since every 3d printed weapon conversion kit which is make no sense at all except kar98k & superi 46.
Playing against the KAR98K in pubs is going to be an absolute nightmare.
WHt filters use on Nvidia ?
4:02 Say hello to my little friend
You pushed him to the limits
Soap: Ah I Love These Weapons
SUPERI 46 may stand for a SMG chambered 4.6x30mm rounds
Yeah,but IRL the gun is chambered in 9x19 or 45 ACP
sad they fumbled the rate of the fire on the .50 beowulf m4, its far too slow
The semi has higher damage btw
İt deals 100 + dmg
Tried it and its just garbage worse ftac recon
It’s for balancing, and recoil
@@bosssoider1854this is an animations showcase, i could care less about balancing guy 😂
it looks and sounds like garbage
Makes sense, they didn’t want it and the FTAC Recon to occupy the same niche, the Recon is a spammable .458 while the Beowulf is slow and marksman like
next weapon want showcase in tokyo map.
They didn’t fix the visual recoil on the MP5 :(
Wait, the M9 and MP5 AMP already available?
I haven't updated the game
No not yet
@@bosssoider1854 Yes, they're available, you just have to do two challenges to unlock them, headshots with Pistols and suppressed kills with SMGs respectively.
So Superi 46 is i guess just an AR15 chambered in 4.6 (MP7 round)?
It's based on CMMG Banshee,but somehow chambered in 4.6 HK
no way, they added the survivalist's rifle
Based and falloutpilled
I wonder why is the Patriot kit a thing, did someone at SHG want an M16 that's full auto and didn't just give the M4 a long barrel?
M16 carry handle that’s why
Did you forget the Hightower Barrel on the M4? It's actually the default barrel for the M16.
Knowing this makes me think that the JAK Patriot is an unnecessary addition as you can just use a Hightower Barrel and Demo Percision Stock on the M4 Receiver to make a full auto M16.
dump mag on tactical?
Yep, and although not wrong, I'm not sure why.
its call of duty not some ultra serious milsim
@@jes3d yeah ur rught its a good anims tho👍
@@jes3dbut it was marketed as realistic war experience-
Now all they gotta do is add HDR
12.7x what mm is the beowulf,i kinda forgot(it ain't 12.7x55 alright)
12.7x42mmRB
@@rosaria8384 thanks
Wow, the Kar98K sounds awful
Wait, at :55 are the rounds just falling out of the gun?! lmao
And why do you think that the Kar98k sounds awful? Name one reason as to why you think that the Kar98k sounds awful, and what do you want to force Kar98k to do about this situation in order for it to not sound awful without saying they should be forced by you to not exist forever?
@@elite-forcecinema1788 What are you waffling about? Was this comment written by ChatGPT?
The bolt on the Kar98K is about to remove itself everytime he racks it. Literally unplayable pls fix
Cry about it mate, The game isn't unplayable because of an animation, grow up
What is the real life name of the superi 46
CMMG Banshee
Glad they adopted the Vanguard version of the Kar98k. MW19 missed the bullet tracking and SHG fixed it
It's mw2019 version not vanguard version
@@adityathapa844 vanguard ver ur fucking blind
@@adityathapa844 no it's vanguard since the stripper clip actually puts the correct amount of rounds in unlike MW2019. Gun wise yeah it's based on mw2019 but the reload is not.
@@adityathapa844 the MW2019 version always keeps three rounds in the stripper clip, while Vanguard tracks the number of bullets left in tac reloads.
@@antonindufournaud6572 the animation is from mw2019 actually but it is altered (mentioned by devs). Fixing that clipper issue doesn't mean that the whole animation is based on vanguard if u can see the similarity between mw2019' and mw3' animation.
>extractor incorrectly rotates with the bolt
>bolt release swings open with each shot
>bolt is not rotated all the way when cycling
>rounds fall out of the gun when loading individual rounds (????????)
E for effort on the kar 98k ig
The whole thing except the inspect animation is ripped straight from MW 2019
@@ALX_6.11 so you're saying they had even more time to fix it
@@feraligatorade99 i'm pretty sure they don't wanna fix it
bro who let JAK cook ??
Bruh is that a polymer kar98k
Superi 46 = Fang 45 (not sure)
CMMG Banshee
@@Randomly_Browsing thx
i cant stand the fake optics from sledgehammers other games shoehorned into this
I like them imo. Adds some more variety and fun to the way I want to build my guns
Kar 98 is not modernized enough give it a mag and 50 cal them call it a day(jk)
Kar98k - some errors can be seen, bullet tracks correctly like in Vanguard, should have been wood
Superi 46 (CMMG Banshee 4.6mm) - why does this sound better than the AMR9?
JAK Harbinger - 50 Beowulf wouldn't really slow down the rate of fire tbh, also the 3D printing is absolutely unnecessary
JAK Intimidator - unnecessary 3D printing
JAK Decimator - so an MP5KSD with unnecessary 3D printing?
JAK Atlas - at least this looks a bit better than the original, I guess
JAK Patriot - no need to 3D print everything except for the lower, the full auto is just a replacement of the fire control with an auto sear to allow for full auto
That banshee is 4.6, duhh it's better
@@ALX_6.11 I said it's better than the AMR9, and thanks for clarifying the caliber
game still bad
Mw 2019 better
Grow up
@@MassiveMaximus fym grow up im not playing cod
...that is the third MP5 variant they've made. With no significant differences.
It's not a new MP5 variant. It's a conversion kit for the pre-existing MP5SD.
I don't mind tho man do I want so see an MP5/10, if not a JAK kit of it
@ApocalypseMoose ...you're only proving my point, that they're either running out of ideas or too lazy to find or come up with new weapon models.
Basically the burst MP5SD shortened and made full auto
For some reason
the 3d printed m16 was so cool why did they have to go and give us another all black polymer ar variant 🥲
It''s still 3d printed. He just added the black camo
I don't agree with any rifle or gun being 3D printed is cool. It's interesting/intriguing but absolutely not cool.
3d printed on something like that is gonna explode, especially the beowulf AR
@@nismo3871 On the lower? Most of the stress is on the bolt and the upper, it would be fine I think but maybe I'm wrong
@@nismo3871 the lower is the one that should only be printed. The rest should still be metal