Man, props to Zach. Works so hard on all of these cars, then becomes a truck driver to get all these cars to the track, all with a smile on his face. What a guy!
@@CotyD I don't think It ran off the track the pic he posted kinda just looked like the side of the road if it was the end of the track it would've been sand
@@myprofilenameisreallylongl5956 they can, but Kevin from KSR explained that with radial tires, the minute the wheelie bars hit the radial tire unloads and spins so it is worthless. The slicks are forgivingwith wheelie bars. Thats why they try to keep the wheels down. If you put slicks and a wheelie bar on mullet , it would runs 6s all the time, but that is not what the car was built to do. Its a radial tire car.
Man I am so happy for George that he gets his own ride. He had no chances of this happening for him at that other shop and you tube channel. Thank you for looking out for George. Longtime viewer here and just calling it like I see it.
@@13bro45 yup. Jeremy wouldn't even HAVE a UA-cam channel if it wasn't for Cleetus. I've completely stopped watching due to how he handled George. He wanted to focus on his existing business, instead of attracting new customers. Welp, I'm pretty sure that was the wrong decision. Not only did he lose a lot of eyes on his business (doing crappy tunes), but he lost easily one of his best employees in George, who now drives almost 2 hours everyday to work.
George is going need a antiroll bar and wheelie bars or a wheel height sensor to keep that monster on the ground. Be safe I'm looking forward to watching the race.
Legitimately, Rocky is my favorite car in the fleet. What was a "finish the race week" car has quickly become a 1100 horse torque ripper, plus the only supercharged drag car as of today (can't wait for the fox body)
PD blowers are tight tolerance machines. With the blower locked you can hear the engine "laboring" to breathe. Pulling engine vacuum on a static blower with pull oil though the seals i.e. destroy the blower seals and who knows what else as the engine overheats. Good experiment...bad idea, can't wait to see what happens
considering it is an LS afterall I would just swap intake manifold between driving and racing.. I guess it doesn't matter if you have unlimited money when you ruin the blower
What they need to do is have a set up like the OG shit box of doom had. They had a burst panel, remove the panel and put a TB there below the blower for street drives
I won't be surprised if it damages the blower. A quick fix would be to drill and tap a hole in somewhere below the blower so breath through there, then plug it when using the blower.
couldn't they swap pulleys so it has zero boost than drive it on pump gas? I feel like they are going to destroy the engine and blower driving it with the belt off. I want to see this thing do low 9s not destroy itself.
I don't blame him. That thing is going to be flat scary to drive, it's got gobs of torque, and it's going to be twisting while trying to wheelie...not to mention that he doesn't have the most stellar record of automotive experiences.
I mean, I don’t dislike anything about this build, but a pre-emptive RIP to the Blazer. It is inevitable that it will end up on its roof after touching the moon.
The week that cost him his former job, is paying dividend like a mother right now!👍 Go Georgie! Best of luck guys and looking forward to some insane racing. Mullet is a monster, Rocky is straight up gangsta.
He went on rocky mtn raceweek and fasterproms told him he couldn't take the time off because they were busy. There's a video about it on the fasterproms channel.
@@pob000 John? He was at fasterproms, was spending to much time with cleetus on his channel, cleetus took George on this same race week last year and fasterproms took offense to it, got super jealous and fired George. Cleetus hired him and one year later (I think 1 year) George has become a huge part of the channel, just look at the blazer! Faster proms shot themselves in the foot. Even their video views have dropped drastically and the quality of the content just isn't there
I love how rocky went from we need something to race to a full blown project for gorgie you can see the appreciation on his face and all the others but gorgie’s energy is unmatched love all y’all do to keep us entertained
Disappointed that Ruby is missing her first race week, but at least it's the blazer that's replacing her. The blazer originated after Ruby broke last year.
@@lateagain7116 nop, for what i seen the last videos, she dint have the rear end hooked up. i assume that they dint had time to put it together or trans shop dint finished the tuneup for it
@@lateagain7116 The aluminum LS is still going strong, but it's only a matter of time before they send it on the boost controller and blow the gaskets out of it. Then they talked about putting the aluminum rod LSX out of Mullet into Ruby.
@@Mis73rRand0m lol mullet doesn't weight almost 5000lbs.... a base model c6 vette is 3400lbs stock. add giant turbo, all the cage/tubing, lines, cable, water etc, probably a 3600lb car, basically same if not heavier than mullet.
Please get Zach his own race car also, he is the one dude that truely deserve this. Always smiling and happy to do whatever comes his way. Tye also though.
No one can compete with this quality content output, Its absolutely insane, Like y'all got stuck in the month of freedom. Hope you guys realize how much we all appreciate this hard work and dedication!
I can not agree more. He looks REALLY nervous about this. He even said we need to take the blower off and we REALLY need that anti roll bar. I am worried for George. I know they worked hard to get this thing ready but SURELY they are not going to let George race this thing.
I can’t even begin to express how happy I am for George. He has been such a wonderful addition to the crew and he’s always so happy. Big kudos to you Cleetus for making this happen for George!!
I’m legitimately worried for George and Rocky. That thing is ROWDY and violent AF!!! I actually hope it blows the tires off first rip so they can sneak up on running fast, giving George a little seat time to get used to that monster.
@@ForeverNeverwhere1 I hope not but a roots style blower on a big block is rowdy as F especially with the boost they are running and no ant-roll bar. The big question is that engine going to live with it already running hot. Correction the Blazer has a small block in not a big block. I guess I was thinking about the 632 that was originally paired with that blower and the fact Mullet now finally has a big block that is also having problems running warn as well. Sounds to like Cleetus needs to spring for a couple larger radiators but that their program and ours to watch them on the struggle bus playing the overheating blues. Side not Cleetus posted on Instagram that the blazer did some agricultural driving when it lost it brakes due to the brake pedal becoming disconnected from the master cylinder. Speaking from a personal experience that gets real exciting real quick when you press on the brake pedal and it goes to the floor and then proceeds swing back and forth like Johnny and Susie kissing on a swing.
Now imagine putting that combo in Leroy... Shooooo! But, I'm highly invested in our favorite savage's refresh! Lots of leveling up in the shop lately and kudos to all of you! James for the Nova and Killa-B, Toast getting dialed, Mullet getting the Steve Morris treatment... HELL YEAH, BROTHER!
@Billy White Jr. True, but not quite the full refresh that Leroy is getting. It's been a while since Leroy really pushed into a better bracket. No shame, he's a legend, but I'll be glad to see some more R&D being done on a new power plant in the chassis. :)
Can we just give some props to this team, Month of Freedom, Win at Midwest Drags, Now a Race week, Sic Week...And Much More! Can we just call this the Summer of Freedom. You've surpassed "Do it for Dale" your Doin it for the World Brother! Thank you to Cleetus and Team.
I've been watching since before you quit law school and I'm so happy for the success all your hard work has produced. Please tell us more about Zach and Ty, where did yall find such skilled and talented dudes? I'd love to hear their stories . Rock on 🤘.
Seeing how roudy this thing is, im genuinely concerned for our boy George. This thing needs some serious anti-roll/wheelie fabrication installed. Hope they took it with them on the drive just incase. We all know how excited he gets. Praying for safe travels on road and strip.
Really hope you guys can keep the Blazer cool enough to complete the track to track trips, hell if nothing else put an auxiliary radiator vertical on the roof and tap into the top/bottom hoses for the drive portion. Seen it done on a truck with the extra radiator mounted at the tailgate area and knocked 60* out of it, went from constant 220* to 160* without even having a fan on it
Wheelie machine. I still think there should be an off road suspension added to the front of it so George can wheelie all he wants but not break it on the way down.
So happy for George! That’s a badass setup! Can’t wait to see it go down the track! Good luck on drag week fellas! 🤘🔥 that’s gonna be a wheelie machine!
I can definitely see some anti-wheelie bars in Rocky's future with 'ol George's track record. Lol! Let's Goooo Boys! I wish you all the best during Race Week!
I agree. If it's getting that hot on the dyno, they're definitely going to need to figure out the cooling or it will overheat while they're driving it between race tracks. I suspect there's some air in the system still but they're gonna have to do something else to help keep it cool.
Can't wait to see the look on George's face and hear his reaction on his first pass......this is going to be awesome !! Once again what a cracking team McFarland Racing has pulled together, the quality work the guys put in is second to none. Each and every member of the team is so damn good at what they do it's no wonder they can pull off the impossible in such a short time frame. All the best on race week and I'm so pumped to watch the upcoming videos 💯👍
sure hope that little blazer makes it , i be rooting for it , might put a pedal stop on there to prevent it doing a backflip in 1/25th of a second at the starting line
I’ve got cdl’s and tired of trucking! Give me a job to drive the toterhome and trailer lol! Me and my family will gladly move to Florida! Been waiting on the blazer videos, so glad it’s going!
Finishing a build literally hours before Race Week….”I don’t see one thing that could go wrong”…. Can’t wait to see George do his thing this week. Good luck guys
Come on 3 million!!!!!! Cletus and gang I'm so proud of everything you guys accomplished and then some! Happy Father's day to all the Father's out there.
You should probably get that weird squeak at idle taken care of on Sam's bone stock corvette...it's probably the deharmonic humidfier they get gummed up in the Florida air
We’ve been asking, let’s get that ty play lost and watch and learn. Ty’s work is amazing from all the big projects to just your average small projects which helps this team in its everyday problem solving.
Man the blazer is my favorite build. So rowdy. Tye killing it with all the quick fix fab work he does. Such a great team, even Zach driving the rig is a sacrifice. What can’t Zach do?
I’m with you man I moved to a new house six months ago I haven’t even plugged my normal TV cable box back in and if your newer to UA-cam I’m sure you probably know this but if not check out 1320 video they do by far the best coverage of race week but they missed last year’s 2.0 so I’m kind of worried they might not go to this one but seeing as how they sponsor the event I’m hoping they’re going to be there
As of right meow, Rocky is currently my favorite vehicle in the fleet. And to see George get so pumped to drive it is so entertaining. Good choice Cleeter bring Goerge in to the family.
I love the compression on your guys camera mics, how it lowers the audio to be almost muted when something super loud happens. It feels like a nuke goes off when the Blazer went full throttle.
If it comes down to it... you could limit power by putting in a throttle stop so you don't get full WOT out of it. Might be the only way to control it at this point!
I'm more worried about it wrecking. That's one crazy ride right there, and I don't doubt George's driving abilities, but with no anti-roll bar, super short wheelbase while being relatively tall, and a stupid amount of torque right off the line I can practically see it flipping. I hope I'm proven wrong
@@adrianciotinga8718 it takes 20 minutes to install a roll bar. Through it in the blazer and install it at the track lol. The car was super hot on meth. On 93 it hit 240 just running in the parking lot. The pump wasn't running but going up the rocky mountains will be a major issue.
Yeah its barely put together, not tested and already has several problems. I give it a day or 2 max which ironically, is the extra day or 2 it needs to be ready
Man, props to Zach. Works so hard on all of these cars, then becomes a truck driver to get all these cars to the track, all with a smile on his face. What a guy!
He definitely deserves a pat on the back. He is an over shadowed member of the team, lets go zach!!
i hop they pay him good
Zack is bad mfr on his fabrication. I know Cleeter takes care of his team. He isn't greedy.
@@xaviergomez9989 I’m sure he gets paid more than enough. I guarantee it’s 100k +. Which he absolutely deserves!!
I personally think Tye is the MVP in the shop…dude is a top tier fabricator. Cleet has definitely put together a awesome group of guys
Realistically, I have no expectation of it finishing the event, but every minute that the Blazer survives on race week is a bonus!
Already ran off the end of the track cause the break pedal broke or something lol
@@CotyD huh
It's got the Blake's bread
@@CotyD I don't think It ran off the track the pic he posted kinda just looked like the side of the road if it was the end of the track it would've been sand
You called it😅😂
If there's a car in the shop that I'd be okay with wheelie bars, it's this monster. I really don't want to see George upside down again lmao
They can’t run their classes with a wheelie bar
@@myprofilenameisreallylongl5956 they can, but Kevin from KSR explained that with radial tires, the minute the wheelie bars hit the radial tire unloads and spins so it is worthless. The slicks are forgivingwith wheelie bars. Thats why they try to keep the wheels down.
If you put slicks and a wheelie bar on mullet , it would runs 6s all the time, but that is not what the car was built to do. Its a radial tire car.
He crashed it again
@@jasongoldsack8968 well explained. Thank you.
@@Yz4Life indeed, i didn't know that eather!
Man I am so happy for George that he gets his own ride. He had no chances of this happening for him at that other shop and you tube channel. Thank you for looking out for George. Longtime viewer here and just calling it like I see it.
I actually don’t know where George came from before. But I can tell he’s a PERFECT fit here. Love these dudes
@@wword boosted boys i think?
@@wword He worked at cleetus's old shop but not for cleetus. I think the channel was called fasterproms.
@@13bro45 ohhhkayyyy gotcha gotcha
@@13bro45 yup. Jeremy wouldn't even HAVE a UA-cam channel if it wasn't for Cleetus. I've completely stopped watching due to how he handled George. He wanted to focus on his existing business, instead of attracting new customers. Welp, I'm pretty sure that was the wrong decision. Not only did he lose a lot of eyes on his business (doing crappy tunes), but he lost easily one of his best employees in George, who now drives almost 2 hours everyday to work.
Nate: **stabs the throttle**
The look in George's eye: "I'm in danger."
Definitely had a 🤖 Danger Will Robinson‼️moment.
George is going need a antiroll bar and wheelie bars or a wheel height sensor to keep that monster on the ground. Be safe I'm looking forward to watching the race.
He'll crash it.
What in the world GOLLY
literally just needs a height sensor like kyle with his mr2 and maybe a bit of weight on the front
@@Ultra77737 lmaoo
Wheel height sensor only works if they keep it on.
Tye is definitley the hardest working , most skilled one in the bunch. His work is incredible. Love where the channel has gone. Next level.
Thats abit insulting to the rest of the team. One without the other is useless. Tye is a fantastic fabricator and just one of the cogs in the wheel
It’s a team homie they all play they’re own part
Good thing he is humble. What the others don’t know they will more then likely get a chance to learn.
I enjoy watching him fabricate things. And the rest of the guys also. Dang good bunch of guys ya got there, Cleet.
No. There is not a single best person. They are a team period.
5:50 The first time ive heard “FULL PULL” in a long time! Love it
Legitimately, Rocky is my favorite car in the fleet. What was a "finish the race week" car has quickly become a 1100 horse torque ripper, plus the only supercharged drag car as of today (can't wait for the fox body)
Have I missed it they are building a fox body?
PD blowers are tight tolerance machines. With the blower locked you can hear the engine "laboring" to breathe.
Pulling engine vacuum on a static blower with pull oil though the seals i.e. destroy the blower seals and who knows what else as the engine overheats.
Good experiment...bad idea, can't wait to see what happens
considering it is an LS afterall I would just swap intake manifold between driving and racing.. I guess it doesn't matter if you have unlimited money when you ruin the blower
What they need to do is have a set up like the OG shit box of doom had. They had a burst panel, remove the panel and put a TB there below the blower for street drives
I won't be surprised if it damages the blower. A quick fix would be to drill and tap a hole in somewhere below the blower so breath through there, then plug it when using the blower.
couldn't they swap pulleys so it has zero boost than drive it on pump gas? I feel like they are going to destroy the engine and blower driving it with the belt off. I want to see this thing do low 9s not destroy itself.
@@302hobronco It would overheat the blower.. A spacer with a spot to bolt on a throttle body is better.
Georgie looked legit frightened after the first lick on the dyno.....he didn't crack a single joke after that🤣
I don't blame him. That thing is going to be flat scary to drive, it's got gobs of torque, and it's going to be twisting while trying to wheelie...not to mention that he doesn't have the most stellar record of automotive experiences.
He going to mount a wild stallion. I hope it won’t try to kill him, this is serious power, no room for mistakes!
its going to need a wheeliebar for sure. if it popped wheelies before then its going to need everything it can get to just stay down
I mean, I don’t dislike anything about this build, but a pre-emptive RIP to the Blazer. It is inevitable that it will end up on its roof after touching the moon.
It will be a kick ass poster tho 😂
@@cbcalhoun Buy and Hold (DRS)
@@dirtbikemike7815 do you wanna sell tshirts? Because that’s how you sell tshirts.
The week that cost him his former job, is paying dividend like a mother right now!👍 Go Georgie! Best of luck guys and looking forward to some insane racing. Mullet is a monster, Rocky is straight up gangsta.
Why did he lose his former job with John
@@pob000 vp
Vvvbbbv you v
He went on rocky mtn raceweek and fasterproms told him he couldn't take the time off because they were busy. There's a video about it on the fasterproms channel.
@@pob000 John?
He was at fasterproms, was spending to much time with cleetus on his channel, cleetus took George on this same race week last year and fasterproms took offense to it, got super jealous and fired George.
Cleetus hired him and one year later (I think 1 year) George has become a huge part of the channel, just look at the blazer! Faster proms shot themselves in the foot. Even their video views have dropped drastically and the quality of the content just isn't there
0-insanity in .005 seconds. That has the most insane throttle response I have ever seen. Also I'm really happy for George. What a badass setup 👍🇺🇸👍
I love how rocky went from we need something to race to a full blown project for gorgie you can see the appreciation on his face and all the others but gorgie’s energy is unmatched love all y’all do to keep us entertained
“You should feel it inside, it’s insane” is an incredible quote.
...That'swhatshesaid
Wow.... intelligence level 💯
George deserves every bit of that build!
For what!!
@@Dealete420 his content. duh.
@@MrSupermugen thanks lol
Disappointed that Ruby is missing her first race week, but at least it's the blazer that's replacing her. The blazer originated after Ruby broke last year.
Time for Ruby to get a big block??
@@lateagain7116 nop, for what i seen the last videos, she dint have the rear end hooked up. i assume that they dint had time to put it together or trans shop dint finished the tuneup for it
@@lateagain7116 The aluminum LS is still going strong, but it's only a matter of time before they send it on the boost controller and blow the gaskets out of it. Then they talked about putting the aluminum rod LSX out of Mullet into Ruby.
I think with Ruby being like 1klb lighter than Mullet, you are exactly right; the car won't kill the engine, but the boys sure will.
@@Mis73rRand0m lol mullet doesn't weight almost 5000lbs.... a base model c6 vette is 3400lbs stock. add giant turbo, all the cage/tubing, lines, cable, water etc, probably a 3600lb car, basically same if not heavier than mullet.
I can tell George is nervous! And I don’t blame him, I’m nervous for him. That’s going to be a crazy ride
My thoughts too that's a lot of power hope he's ready cause he ain't scared of a wheelie
Please get Zach his own race car also, he is the one dude that truely deserve this. Always smiling and happy to do whatever comes his way. Tye also though.
George is great! love seeing him living his best life. He has such an appreciation for everything it's great to see!
No one can compete with this quality content output, Its absolutely insane, Like y'all got stuck in the month of freedom. Hope you guys realize how much we all appreciate this hard work and dedication!
I mean @zipties and bias plies could
George looks like he may be in over his head with those horse torques.
I could see a nervous twinkle in his eye. And I don't blame him one bit.
That much freedom,short wheelbase??.
George may end up on his head when he flips that thing.
I can not agree more. He looks REALLY nervous about this. He even said we need to take the blower off and we REALLY need that anti roll bar. I am worried for George. I know they worked hard to get this thing ready but SURELY they are not going to let George race this thing.
@@lilbitofjoy6130 yes they are
I predict he's gonna snap an axle if it perfectly hooks, and probably for the best. He really needs that sway bar in the rear end.
I can’t even begin to express how happy I am for George. He has been such a wonderful addition to the crew and he’s always so happy. Big kudos to you Cleetus for making this happen for George!!
You've got a great team Cleet! And I love that you're keeping the same old timelapse tune in, it makes me feel happy!
You've built such an amazing team. You pulled me in 4 years ago and I love where you're at. You deserve it all brother.
Gotta say,Zack is always there doing his best.The man's an asset I say!!.
Cleetus's face learning there's no anti-rollbar, followed by George responding "It's on the list". 🤣 Classic George.
I can’t get enough of the blazer, I keep coming back to hear this baby surge
I’m legitimately worried for George and Rocky. That thing is ROWDY and violent AF!!! I actually hope it blows the tires off first rip so they can sneak up on running fast, giving George a little seat time to get used to that monster.
It won't be in one piece by the end, it is going to end up crashed.
I can already see the wheelie he’s going to do on the first pass
@@ForeverNeverwhere1 lol you’re probably right on that
I wasn't ready when he hit it first time. like "WOAH!"
@@ForeverNeverwhere1 I hope not but a roots style blower on a big block is rowdy as F especially with the boost they are running and no ant-roll bar. The big question is that engine going to live with it already running hot. Correction the Blazer has a small block in not a big block. I guess I was thinking about the 632 that was originally paired with that blower and the fact Mullet now finally has a big block that is also having problems running warn as well. Sounds to like Cleetus needs to spring for a couple larger radiators but that their program and ours to watch them on the struggle bus playing the overheating blues. Side not Cleetus posted on Instagram that the blazer did some agricultural driving when it lost it brakes due to the brake pedal becoming disconnected from the master cylinder. Speaking from a personal experience that gets real exciting real quick when you press on the brake pedal and it goes to the floor and then proceeds swing back and forth like Johnny and Susie kissing on a swing.
The excitement from George makes everything worth it!
Now imagine putting that combo in Leroy... Shooooo!
But, I'm highly invested in our favorite savage's refresh! Lots of leveling up in the shop lately and kudos to all of you!
James for the Nova and Killa-B, Toast getting dialed, Mullet getting the Steve Morris treatment...
HELL YEAH, BROTHER!
@Billy White Jr. True, but not quite the full refresh that Leroy is getting. It's been a while since Leroy really pushed into a better bracket. No shame, he's a legend, but I'll be glad to see some more R&D being done on a new power plant in the chassis. :)
Can we just give some props to this team, Month of Freedom, Win at Midwest Drags, Now a Race week, Sic Week...And Much More! Can we just call this the Summer of Freedom. You've surpassed "Do it for Dale" your Doin it for the World Brother!
Thank you to Cleetus and Team.
I've been watching since before you quit law school and I'm so happy for the success all your hard work has produced. Please tell us more about Zach and Ty, where did yall find such skilled and talented dudes? I'd love to hear their stories . Rock on 🤘.
Let's go boys can't wait to see this drag series coming up
Seeing how roudy this thing is, im genuinely concerned for our boy George. This thing needs some serious anti-roll/wheelie fabrication installed. Hope they took it with them on the drive just incase. We all know how excited he gets. Praying for safe travels on road and strip.
Really hope you guys can keep the Blazer cool enough to complete the track to track trips, hell if nothing else put an auxiliary radiator vertical on the roof and tap into the top/bottom hoses for the drive portion. Seen it done on a truck with the extra radiator mounted at the tailgate area and knocked 60* out of it, went from constant 220* to 160* without even having a fan on it
°
Yup, was thinking exactly this. Plumb it into the heater core lines.
Or go getto, plumb the windows washer to the front of the radiator to mist water over the radiator as needed!
@@robstoeckel353 that's a 15 minute solution at best until you refill it.
Or a big oil cooler mounted underneath helps a lot from what I’ve heard
Wheelie machine. I still think there should be an off road suspension added to the front of it so George can wheelie all he wants but not break it on the way down.
Just a good set of bump stops would help
Yup. King Bypass would do a WORLD of good up there.
Only 3 certainties in life.
Death
Taxes
That blazer breaking
I agree maybe go gasser
Lol I bet George has PTSD after the fiero
I'm glad george is getting a car in the fleet, all the boys need one!!!!
If only I could experience the pure excitement these guys get with these builds. Genuine happiness.
So happy for George! That’s a badass setup! Can’t wait to see it go down the track! Good luck on drag week fellas! 🤘🔥 that’s gonna be a wheelie machine!
Hopefully it doesn't end up like a certain small red sports car...
He is scared! For good reason 😂😂😂
@@UmmmmmmmWhat It will with George behind the wheel.
A WHEELIE could destroy it. they are cool but very bad for the car and components...
@@Blackjack_focus_st3 really?🥴
The way Nate gets on the throttle and the microphone just peaks 😂😂😂 Rowdy as hell!
Cleetus: "whatcha got there?"
Tye: "blower stopper 9000"
me: dead 🤣
love this channel!
Good luck George! Stay safe brother. Super stoked to watch this monster on race week.
I can definitely see some anti-wheelie bars in Rocky's future with 'ol George's track record. Lol! Let's Goooo Boys! I wish you all the best during Race Week!
They better be strong too or they'll fold like paper. 😂
That's assuming it survives Race Week...
Ol' Georgy looked a little scared when the Dr. made that pull. So sick!!!
I see a future of rigging up a radiator sprayer like the Boosted Boys did on the minivan a few years ago to keep that thing cool.
I agree. If it's getting that hot on the dyno, they're definitely going to need to figure out the cooling or it will overheat while they're driving it between race tracks. I suspect there's some air in the system still but they're gonna have to do something else to help keep it cool.
james said anti roll, it's on top... thats whats up!!!!!
Can't wait to see the look on George's face and hear his reaction on his first pass......this is going to be awesome !! Once again what a cracking team McFarland Racing has pulled together, the quality work the guys put in is second to none. Each and every member of the team is so damn good at what they do it's no wonder they can pull off the impossible in such a short time frame. All the best on race week and I'm so pumped to watch the upcoming videos 💯👍
There is no way Rocky isn't wrecking or blowing an engine this week.
GOOOOLY!!!
Love seeing the Blazer running and George's smile because of it!
Gonna miss Leroy too
How we gonna gloss over the fact Sam is gonna be driving a "stock" c5 for raceweek ?!?
“Stock”. Lol
"stock" It's got the same kind of belt jingle that the c7 does, chances are it's got a pro charger
@@Redsparrow12 That's just the Florida extra air conditioning package.
George is a great wheel man!!!
Wow I missed that. I love that guy!!!!! Talked to him last November - he is super cool.
LS George & the Blazer are by far my favorite on the show!
1:30 what are you doin George? "Not locking my break linkage in"
I predict the temp and/or torque is gonna make a couple good videos in the future! Best of luck George!
sure hope that little blazer makes it , i be rooting for it , might put a pedal stop on there to prevent it doing a backflip in 1/25th of a second at the starting line
Are all the boys eventually gonna have drag cars, McFarland race team would dominate
Maddie needs a car.
@@shoutykat she should have ruby cause ruby is such a stable car
I'd love to see Maddie go with them some time on one of these drag and drive events and get her own car to drive.
@@shoutykat stop being thirsty, we are here for racing, not his wife
@@C6903 Facts. She's good support for the team. If she wants to race, Cleet will get her suited up when she's ready, and we'll cheer her on.
RMRW is about to change forever.
George is finally getting to have as much fun as you Cleet.
I’ve got cdl’s and tired of trucking! Give me a job to drive the toterhome and trailer lol!
Me and my family will gladly move to Florida!
Been waiting on the blazer videos, so glad it’s going!
I love how excited George gets about that car.
I just really want to see George and the blazer make it through the week.
fat chance lol...
Finishing a build literally hours before Race Week….”I don’t see one thing that could go wrong”….
Can’t wait to see George do his thing this week. Good luck guys
Come on 3 million!!!!!! Cletus and gang I'm so proud of everything you guys accomplished and then some! Happy Father's day to all the Father's out there.
You should probably get that weird squeak at idle taken care of on Sam's bone stock corvette...it's probably the deharmonic humidfier they get gummed up in the Florida air
I can't wait to see George's eyes bug out when that light goes green!! Nice work guys now go get us some wins!! Cheers from the West Coast Canada..
Come on man, I'm not even a huge Vette guy and I know that's a Millenium Yellow C5 Z06 notchback. Freaking love Sam's car.
C5 fan here too. I have a C5.
Are you thinking about the Butternut yellow comment? That was for the 3rd gen Camaro.
Straight to the 1000 hp holy smokes man that is crazy hahaha. Georges face after that first pull. 😂 Love to see it man.
I love that you can see that george really loves rocky❤️
This video made shopping with my wife awesome!!! can't wait for George to rip it I'm so happy for him
Hell yea brother!! That’s what you call BUENOS DIAS!!! Love the videos cleetus keep up the good work! 👍🏽🇺🇸
You know it's going to be a show , when it over heats pulling into the trailer
That's what happens when you don't have the water pump on XD Hope this thing survives the week
Sounds like it's time for a bigass wheelie bar or somethin on that blazer lol, those were some of the rowdiest dyno hits I've seen hahahah
The Blazer is definitely my favorite project to come out of McFarland fab thus far!
What a Team Cleetus has put together! Each and everyone of them is so vital in their own way!
This puppy is gonna need some sturdy wheelie bars
That moment when "anti-roll bar" takes on a whole new meaning.
Hadn't thought of that 🤣 that's good ish
That throttle "blip" sure was angry. I'm worried for Georgie, as that's a lot of machine now and he could get hurt real bad.
Well, he lost his brakes and ended up in a field.
@@jonasthemovie excuse me?
@@RowanRedbrush Social media post, guess we will see it on youtube in a few
MURICA
I can't think of a single way to better start off Fathers day than with some freedom!
There's only one thing to say hell yeah brother
Sam’s corvette definitely sounds stock😂😂
We’ve been asking, let’s get that ty play lost and watch and learn. Ty’s work is amazing from all the big projects to just your average small projects which helps this team in its everyday problem solving.
Honestly if there isn't roof damage from a backflip in the Blazer consider it a win this week boys!
Man the blazer is my favorite build. So rowdy. Tye killing it with all the quick fix fab work he does. Such a great team, even Zach driving the rig is a sacrifice. What can’t Zach do?
Like Lone Wolf McQuade! HIT that Blower Switch!
I'm so excited for race week. You guys deserve some good results!
I’m just going to say it……the freedom level in the Blazer might be a smiiiiiiiiidge high for ol’ Georgie to handle
just go full Hammond
I am so pumped for this upcoming race week. I think I’ve fully converted to UA-cam only now 😂
I’m with you man I moved to a new house six months ago I haven’t even plugged my normal TV cable box back in and if your newer to UA-cam I’m sure you probably know this but if not check out 1320 video they do by far the best coverage of race week but they missed last year’s 2.0 so I’m kind of worried they might not go to this one but seeing as how they sponsor the event I’m hoping they’re going to be there
The Blazer is easily my favorite car of the fleet. Raw power and certified ripper.
As of right meow, Rocky is currently my favorite vehicle in the fleet. And to see George get so pumped to drive it is so entertaining. Good choice Cleeter bring Goerge in to the family.
"Its in the 📦 " 😂 Rocky is gonna beat Mullet's recent wheelie for sure.
I can already picture the wheelie it’s going to do on the first rip!
Might even flip like a turtle 🐢
The Blazer is some of my favorite content. Can't wait to see it on RMRW. Hope it does well. I know you guys haven't had any time to sort things out.
I love the compression on your guys camera mics, how it lowers the audio to be almost muted when something super loud happens. It feels like a nuke goes off when the Blazer went full throttle.
If it comes down to it... you could limit power by putting in a throttle stop so you don't get full WOT out of it. Might be the only way to control it at this point!
No way that over heating monster is going to make the entire trip😂
Well this is gonna be interesting. Can't wait to see the videos.
The blazer is by far my favorite build. That is until the Ute gets built. Can't wait to see George RIP Rocky
This video smells like America, and I love It.
Great comment... was at a car show today in my town and said same thing after walking behind some hot rods... was a good day!
That thing REALLY needs wheelie bars on the back
The blazer is really neat, but I've got my doubts on the car surviving the week without breaking down mostly due to heat.
I'm more worried about it wrecking. That's one crazy ride right there, and I don't doubt George's driving abilities, but with no anti-roll bar, super short wheelbase while being relatively tall, and a stupid amount of torque right off the line I can practically see it flipping. I hope I'm proven wrong
@@adrianciotinga8718 it takes 20 minutes to install a roll bar. Through it in the blazer and install it at the track lol. The car was super hot on meth. On 93 it hit 240 just running in the parking lot. The pump wasn't running but going up the rocky mountains will be a major issue.
Yeah its barely put together, not tested and already has several problems. I give it a day or 2 max which ironically, is the extra day or 2 it needs to be ready
Such negativity
Cleet straight up called you out in his latest upload 🤣