I know Im asking the wrong place but does anybody know of a method to log back into an instagram account..? I was dumb lost my login password. I love any help you can give me!
@Flynn Vihaan thanks so much for your reply. I got to the site on google and im waiting for the hacking stuff atm. I see it takes a while so I will get back to you later with my results.
I think it would work better if you passed all the way through the drum and out the other hole, pull it out the length of the drum and tape it (the short piece) to the drum so that your windings bind the short bit down as it develops load. That is the method recommended by a large synthetic supplier...another way would be to loop the pass through end (as if you were going to put in an eye) and place a small round object or a small nut in the loop and pull that back down snug in the hole that was designed to loop the metal cable in. That way it could not pull all the way through if you get too short on your wrappings. I understand you aren't going to do that in a plow situation.
What might help you is also have the line come off the top of the spindle on the winch and a bigger roller on the front. This spring I’m switching to full synthetic you warn winch cable that’s metal sucks snaps a lot at the hook.
I have new warn on my Rancher, any idea why the cables snap so easy ? Mine has 4 snow storms on it. The hook has never been in to much either. I had to pull out 4 feet of cable to cut off because I noticed it was flat, and starting to come apart. Thanks ! I think this happened way pre maturely.
After running a piece of wire in my hand and the difficulty of repairing a broken wire rope I've been thinking of replacing mine with a synthetic rope. I was under the impression that you wasn't supposed to use a synthetic rope with a roller fairlead, is that not correct? Or is it ok to use it?
He is putting the wire rope back on in spring for recovering if he gets stuck out on the trail. He is using the nylon rope just for the plow during the winter.
You're video was very helpful. One of the problems with my winch cable is that when you you did the button for open and in. The cable comes out like a foot and rotates back in. The cable is stuck and just rotates back in. How would i be able to get the cable out if this is happening. Do you have any ideas?
The process would be similar I'm sure. You might want to verify the cable diameter. Custom Splice has large variety of this am steel rope. My brother in law has a commander, and that thing is killer. I think he still has the cable installed though.
my grandfather gave me his atv. it has a winch an snowplow on it. is i like your video. do you think it will work with my grandpa's fourwheeler ? cuz he has a winch and snowplow to it
Synthetic Winch Rope on Amazon - amzn.to/34xswim
Winch Aluminum Fairlead on Amazon - amzn.to/2JKXnji
I know Im asking the wrong place but does anybody know of a method to log back into an instagram account..?
I was dumb lost my login password. I love any help you can give me!
@Karson Sullivan Instablaster =)
@Flynn Vihaan thanks so much for your reply. I got to the site on google and im waiting for the hacking stuff atm.
I see it takes a while so I will get back to you later with my results.
@Flynn Vihaan it did the trick and I actually got access to my account again. Im so happy!
Thank you so much you saved my ass !
@Karson Sullivan You are welcome :)
Thanks much less confusing than some of the videos out there. Found it helpful.
This video is fantastic! well done. My wire has snapped 10 times now while plowing and finally I'm replacing with rope. Thank you!!
You got instant street credibility as soon as you mentioned how much braking a cable in winter is a total pain in the a$$.
Heck ya. Good idea on just using the loop! Saves a few on the lift height on the plow as well
If you change the roller fairlead out to an aluminum hawse fairlead, it would change the angle (as it sits further back) and reduce damage to the rope
Great video, thanks! My cable is a tangled mess from plowing, I'm switching to rope now! :)
I think it would work better if you passed all the way through the drum and out the other hole, pull it out the length of the drum and tape it (the short piece) to the drum so that your windings bind the short bit down as it develops load. That is the method recommended by a large synthetic supplier...another way would be to loop the pass through end (as if you were going to put in an eye) and place a small round object or a small nut in the loop and pull that back down snug in the hole that was designed to loop the metal cable in. That way it could not pull all the way through if you get too short on your wrappings. I understand you aren't going to do that in a plow situation.
What might help you is also have the line come off the top of the spindle on the winch and a bigger roller on the front. This spring I’m switching to full synthetic you warn winch cable that’s metal sucks snaps a lot at the hook.
Absolutely splendid video thank you
I have new warn on my Rancher, any idea why the cables snap so easy ? Mine has 4 snow storms on it. The hook has never been in to much either. I had to pull out 4 feet of cable to cut off because I noticed it was flat, and starting to come apart. Thanks ! I think this happened way pre maturely.
I added a snatch block onto the plow thereby doubling the power of my winch.
Thanks for the info😊
Isn't there supposed to be tension and the rope should be under a load as you spool it onto the drum right?
with something this small the tension from it running through his hand as it spools is enough
You where very helpful!
After running a piece of wire in my hand and the difficulty of repairing a broken wire rope I've been thinking of replacing mine with a synthetic rope. I was under the impression that you wasn't supposed to use a synthetic rope with a roller fairlead, is that not correct? Or is it ok to use it?
@Mark Cafarelli thank you!
What was the purpose of saving the previous wire rope "til spring"? Just curious
He is putting the wire rope back on in spring for recovering if he gets stuck out on the trail. He is using the nylon rope just for the plow during the winter.
Do I have to press in or out
It is not recommended to use a roller fairlead with synthetic winch cable; use a hawse fairlead instead.
***** ok, It was not meant to be a knock against you or your video, it is just what I have been told when using synthetic winch cable.
Why
when u Install u bolt the tension on the roller will snap the rope
what about a 6-7" compression spring in that space the spring will help slow down the winch and not pinch -
You're video was very helpful. One of the problems with my winch cable is that when you you did the button for open and in. The cable comes out like a foot and rotates back in. The cable is stuck and just rotates back in. How would i be able to get the cable out if this is happening. Do you have any ideas?
Take winch off and disconnect from power and basically unwind by hand then open it up to investigate and or take it in to someone so inclined
Great Video!
Good video thanks.
Thanks for this!
good video thanks
how about for a can am commander?
The process would be similar I'm sure. You might want to verify the cable diameter. Custom Splice has large variety of this am steel rope. My brother in law has a commander, and that thing is killer. I think he still has the cable installed though.
thanks so much, thats who I ordered it from.
my grandfather gave me his atv. it has a winch an snowplow on it. is i like your video. do you think it will work with my grandpa's fourwheeler ? cuz he has a winch and snowplow to it
How did you attach the rope to the winch?
I believe it doesn't physically attach - just put it through the hole and spool is back up.
You didn’t secure the end of the rope to the spool!🤯🤯
sounds like Mark Jenkins
Hey bud download the app aliexpress tow rope at 100m = 300ft of tow rope and it cost about 80.oo usd
Afraid cable? My cable aint scared a nuthin...
Manila hemp rope is the best
Like yur ifea
Ujhyuuu y la lo mo