i remember doing this when i was 17 years old (to my brand new rims) pulling out of a bank drive-thru. i will never forget the sound and the feeling getting out of the car to check out the damage. just a terrible day.
I scratched my husbands rims. He hasn’t seen it yet so I’m hoping yo fix them before he notices 😂 Horrible feeling listening to the scratching sound 😵💫
I really like the narration on you videos. Instead of free-styling what needs to be said during filming and battling the external noises from the surrounding environment, you decided to prepare and record all the narration aside. All of that makes your videos so much enjoyable with clearly presented information. Thank you
A Hyundai I30n caught my eye in a car park. Weird markings on a front wing. I then realised that the rear had a bright red rim protector and the front was missing. I can only assume that the damage that I saw was caused by a flailing rim protector😢 The damage to the wing would cost more than the wheel… I didn’t notice whether the wheel was damaged too.
Ooof I felt for you when you caught the rim like that, very skilful repair and a great way to share that information. I liked the ‘close call’ montage at the end although I’m getting the impression that’s representative of a typical daily drive wherever you live 😮😂
Well it depends how bad these curb-rashes are and what type of rims.. in this case it did work out Definitely if you want to spare some money.. otherwise in case of two tone, Dymond-cut rims or 2/3 piece rims the process is much more expensive needs CNC rims rectify and that means remove tires, remove valves and the calibration weights from inside the barrel of each rim, then sand-blast, repaint, CNC cut each rim and after that apply clear coat, but is not over because ship all to tire shop to add new valves, put back tires and recalibration..
Omg. This video is perfect. My wife scuffed one of the tire rims through a drive thru. Now I have a better understanding how to do it properly. Thanks!
That was painful to watch. I should think most of us have been there at some time. Can't let your guard down for a second. A very passable repair though, even if you were planning to get it refurbed sometime. Always a pleasure to watch you in action.
One of my videos of yours is the GEIST interior restoration on leather seats. You used leather filler and colouring balm for restoration. Even though it was an exact match in color it still came out magnificent 👌. Which inspired me to do mine and I’m currently working on it. So thank you 👀🫡
We live in narrow cul de sac and I chose to pull over to let a delivery driver come out the other way. Big mistake. Curbed my - until then immaculate - nearside front alloy very badly. I used the same language that you did. The noise as the alloy curbs sets your teeth on edge and you know it's going to be bad before you even get out of the car. ☹️ Ended up selling the car, though not for that reason. Loved the dashcam footage at the end, btw. 👍👍👍
"Poverty-spec elbow grease in the armoury." This made me laugh!
Рік тому+6
Man I felt those first few seconds, just recently I damaged one of my rims (fortunately, very lightly, as it turned out after polishing) by turning too tightly into a kerb and oh boy I was not a happy camper either ;) My tires have the "rim protection" thing and I think it helped a little? Some of the "damage" turned out to be just dirt that I think transferred from the rubber.
Really enjoyable video. I went to Wallasey several years ago with "Smelly" from Manchester. Man she was so fit...but sadly stunk. That's a very good repair.
Good attempt but 100% lacquer it as that'll corrode asap!. Doesn't have to be much but a dusting blended into the ridge where the wheels painted. CVR POV's channel does amazing repairs on wheels like this.
great DIY job Joe, and loved the end montage & on-screen comments 😁. Range Rovers, like most Audi & BMW drivers, think they own the road and don't come fitted with blinkers from the factory, or if they have that optional extra, blinker fluid is usually empty. Hot Fuzz after an autograph??? 😉
Did something very similar a few weeks back. Freshly powder coated alloys in Gloss Black, turned a bend a little sharper than I should have and clipped the rear wheel. As it happens my response was pretty much the same as yours. Ironically if I hadn't fitted the 20mm spacers the previous day I probably would have missed the kerb. GAH!!!
Hey! Been a fan for many years and was a valeter/detailer myself for a few years. However one thing I never learned was how to use a machine polisher! Would you look into perhaps doing a few videos/series on teaching us this? :) Thankyou
Really excellent work there. I know the feeling there when you kurb the wheel. Here in London kurbs are the worst. Accidentally clipped a kurb when turning right at a junction as cars in the left lane would vere to me due to the road straight on being at a angle. Happy my current wheels i bought were already refurbed before i bought them
If you just take off material, you will always see a difference in the geometry of the rim or you have to do it all around. Polished rims are always hard and expensive to repair, if material has gone to a certain degree. But great work!
Appreciate the full length video, I hate shorts! Felt the pain hearing that scrape in the beginning.... Goodyear Asymmetric sport tires have nice wide beads meant to protect your wheel a bit, maybe look into those instead of unsightly rim protectors.
@@CarCleaningGuru Definitely. Been quite lucky on my latest car I haven't done anything yet, but it's only a matter of time with all the potholes around.
You may have to keep going back over the edges of the rim with compound to keep the shine, as the wheel will now have areas where you lost the protective clear coat. If you keep on top of that, they should still be fine.
The tires look like the actually don't protect the rim as they normally do. Could simply be a fitment issue that could have prevented this much damage.
Some tyres incorporate rim protection in the sidewall, some do not - looks like these are the latter as there is almost no lip - even if they were 10 mil wider I don't think it would have helped too much as the sidewall design just doesn't seem to have much rim lip.
Those diamond cut finishes are a pain in the ar$e - I caught both NS wheels on my S2000 on a low kerb near Cheddar Gorge soon after the rears had been replaced due to corrosion 😭 I managed to tidy up the worst of it but didn't go as far as polishing, just took out the gouges and sprayed some clear lacquer over them - it still bothers me but after seeing how they handle wheels even at a "careful" tyre place where I was watching over them I can't justify doing it properly and sods law it will happen again so I've tried to not let it bother me so much 😳 P.S. Love the caption clips at the end 😁
Flashbacks to having a Tesla with those scuff magnet grey wheels, I hid the scuffs with Alloy Gators before selling it... Great repair and nice dashcam footage but I'm glad the rozzers are pulling people for tinted plates. I'm sure you don't do this but most people with them use them as an excuse to drive like a tool. Usually BMWs, Audis and the odd Golf GTI.
I just think they suit the car nicely, nothing to do with not wanting to be seen as the rest of the car is quite in your face. Everything is legit, cameras, wardens, rozzers etc have all been able to read them and if I caused an accident wouldn’t be making off in a manner a witness would need to read them so it’s a complete non-issue in my mind 🤷♂️.
Before putting the alloys back on and hopefully torquing up the wheel nuts, did you make sure the bottom of the Honda badges were perfectly aligned with the tyre valve on each wheel? Dealerships and tyre fitters never do this. It drives me nuts.
Should I buy the turtle wax 1 and done compound or autobrite duo 2 in 1 paint and polish? I have a ford fiesta zetec model with a small-ish scuff along one of the wheels :( This video is brilliant btw.
@CarCleaningGuru Thanks for the replay! I probably should mention, that I will paint in black only the bord ( 10mm max ) of the rims, not the whole rims. Regards
Why are the tires so misfitted that the rims stand out? Almost bought a car with such a combo that came from Tire Rack as a “kit”. Why would pros sent such a combo out? Bad setup IMO.
Previous repair Short: ua-cam.com/users/shortsnOV-K0nX1EA
Hey, where did you get the tool to remove the lug nuts at? Around time stamp 11:27
ua-cam.com/video/8lnj0Vsu6E8/v-deo.htmlsi=1WqHFXYWaWsDTWjW
My driving channel on Driving Psychology 😊
ua-cam.com/video/8lnj0Vsu6E8/v-deo.htmlsi=1WqHFXYWaWsDTWjW
i remember doing this when i was 17 years old (to my brand new rims) pulling out of a bank drive-thru. i will never forget the sound and the feeling getting out of the car to check out the damage. just a terrible day.
I scratched my husbands rims. He hasn’t seen it yet so I’m hoping yo fix them before he notices 😂
Horrible feeling listening to the scratching sound 😵💫
I did the same thing last night. Know how you feel.
I almost cried at your intro...I feel your pain man!🫣
Another great upload though, thanks again mate!
A quick hand job with some all in one polish 😁. Nice wheels those and the Honda logo is lined up straight with the tyre valve perfectly.
I really like the narration on you videos.
Instead of free-styling what needs to be said during filming and battling the external noises from the surrounding environment, you decided to prepare and record all the narration aside.
All of that makes your videos so much enjoyable with clearly presented information. Thank you
I know those rim protector things might have saved this but I don’t like them 😬
That's Runcorn isn't it, street away from me! What did pc plod say about the plate?
@@ashash7513 the one with the monkey house!
A Hyundai I30n caught my eye in a car park. Weird markings on a front wing.
I then realised that the rear had a bright red rim protector and the front was missing. I can only assume that the damage that I saw was caused by a flailing rim protector😢
The damage to the wing would cost more than the wheel… I didn’t notice whether the wheel was damaged too.
Yeah, they look like they are more trouble than they are worth.
Looks like slightly wider tyres may have helped maybe 5 or 10mm wider or is that the JDM Style with the slight stretch look?
I so love listening to the way you explain things in such helpful and entertaining terms, informative without the lecture ... cheers 👍
🙌🏼🙌🏼🙌🏼 Great job. Love the ending and all the on/screen commentary! 💪🏼💪🏼👍🏼👍🏼
Haha good I was pissing myself laughing doing it!
It certainly looks good, for a budget repair it’s more than acceptable, especially on a daily driven car, well done, and thank you for the tutorial 😊.
Good to have you back again
We all know that sound. I was impressed by the lack of language 😂. Informative video. Bike 5-O “ you cannot park there mate”😂
Didn’t even have hi-viz boots on like me!
Ooof I felt for you when you caught the rim like that, very skilful repair and a great way to share that information.
I liked the ‘close call’ montage at the end although I’m getting the impression that’s representative of a typical daily drive wherever you live 😮😂
What a great result, you have the patience of a saint taking the time to refine at each stage, thank you for sharing
Great video, Joe. That is a brilliant job you have done on the wheel repair.😎👍
Well it depends how bad these curb-rashes are and what type of rims.. in this case it did work out Definitely if you want to spare some money.. otherwise in case of two tone, Dymond-cut rims or 2/3 piece rims the process is much more expensive needs CNC rims rectify and that means remove tires, remove valves and the calibration weights from inside the barrel of each rim, then sand-blast, repaint, CNC cut each rim and after that apply clear coat, but is not over because ship all to tire shop to add new valves, put back tires and recalibration..
Fantastic video in every aspect! Well presented, edited with a great subject, tempted to do this to my wheels to get them super polished! Thank you. 🙏
Omg. This video is perfect. My wife scuffed one of the tire rims through a drive thru. Now I have a better understanding how to do it properly. Thanks!
That was painful to watch. I should think most of us have been there at some time. Can't let your guard down for a second. A very passable repair though, even if you were planning to get it refurbed sometime. Always a pleasure to watch you in action.
One of my videos of yours is the GEIST interior restoration on leather seats. You used leather filler and colouring balm for restoration. Even though it was an exact match in color it still came out magnificent 👌. Which inspired me to do mine and I’m currently working on it. So thank you 👀🫡
Omg . How relaxing was that . Almost like watching David Attenborough on one of his programmes
I've only ever curbed my wheels when using pirelli tyres lol. Michelin and Goodyear tyres have a decent lip on them which have saved me a few times.
Depends on the tyre and the rim size.
Has nothing to do with lip. It’s direct correlation to tyre width vs wheel width
@@waitwot I know but I've had exactly the same size pirellis and Michelin's on the same rim and the Michelin's have a slight lip
@@AndyxPandy yeah fair enough mate, I believe I’ve seen similar. HVe a good night
Loved the dashcam footage and commentary at the end haha
been there a few times its gut wrenching that scrape noise
Good well timed humour throughout this! good job as always.
Thanks for the video, this gave me the confidence to go out in the garage and fix my wheel.
Good work pal. It’s better than ‘good enough’ I finally nailed my Maxton skirts on. I’m actually impressed with the fit and look given the cost.
Yeh they’re not bad but I’ll be sacrificing the splitter on a speed bump instead of the wheels on a kerb next time!
We live in narrow cul de sac and I chose to pull over to let a delivery driver come out the other way. Big mistake. Curbed my - until then immaculate - nearside front alloy very badly. I used the same language that you did. The noise as the alloy curbs sets your teeth on edge and you know it's going to be bad before you even get out of the car. ☹️
Ended up selling the car, though not for that reason.
Loved the dashcam footage at the end, btw. 👍👍👍
"Poverty-spec elbow grease in the armoury." This made me laugh!
Man I felt those first few seconds, just recently I damaged one of my rims (fortunately, very lightly, as it turned out after polishing) by turning too tightly into a kerb and oh boy I was not a happy camper either ;) My tires have the "rim protection" thing and I think it helped a little? Some of the "damage" turned out to be just dirt that I think transferred from the rubber.
These tyres are purposely undersized to prevent arch scrubbage but looks like I’m now prone to scrubbage of a different kind!
@@CarCleaningGuru Ahah answered my question :) I thought wider tyres may have helped.
Never be able to tell the difference unless very very closely inspected, good job El Guru 🙌🏻👏🏻
Been there done that but never repaired mine as well as yours, learnt some good facts from this cheers.
Thanks for this upload wanting to try my hand at this on my oem s2000
Wheels which have seen better days. Love the R btw
Really enjoyable video. I went to Wallasey several years ago with "Smelly" from Manchester. Man she was so fit...but sadly stunk. That's a very good repair.
no idea why the armchair experts don’t like your fix, your method is exactly how I would do it
Came up nice Joe. So frustrating when you catch a wheel.
Good attempt but 100% lacquer it as that'll corrode asap!. Doesn't have to be much but a dusting blended into the ridge where the wheels painted. CVR POV's channel does amazing repairs on wheels like this.
Tidy bit of work matey, nice to place to walk your dog looking across the Mersey to Liverpool.
Love this content. This bloke is awesome. Hi from Brisbane
Good work and good camera shots lol
great DIY job Joe, and loved the end montage & on-screen comments 😁. Range Rovers, like most Audi & BMW drivers, think they own the road and don't come fitted with blinkers from the factory, or if they have that optional extra, blinker fluid is usually empty. Hot Fuzz after an autograph??? 😉
Did something very similar a few weeks back. Freshly powder coated alloys in Gloss Black, turned a bend a little sharper than I should have and clipped the rear wheel. As it happens my response was pretty much the same as yours. Ironically if I hadn't fitted the 20mm spacers the previous day I probably would have missed the kerb. GAH!!!
Yeh it’s the spacers that usually get you 😩
There is more car culture in the final montage than at a BMW car meet 😁
Love the dashcam edit 🤘🏼
Hey! Been a fan for many years and was a valeter/detailer myself for a few years. However one thing I never learned was how to use a machine polisher! Would you look into perhaps doing a few videos/series on teaching us this? :) Thankyou
A superb result! Chapeau 👏
Really excellent work there. I know the feeling there when you kurb the wheel. Here in London kurbs are the worst. Accidentally clipped a kurb when turning right at a junction as cars in the left lane would vere to me due to the road straight on being at a angle. Happy my current wheels i bought were already refurbed before i bought them
Very nice repair and amasing result
Thanks for advice ill fix mine the same way
I reckon you've done a top job there. I know that road too, hate those speed bumps
If you just take off material, you will always see a difference in the geometry of the rim or you have to do it all around. Polished rims are always hard and expensive to repair, if material has gone to a certain degree. But great work!
Yes it’s not perfect but nobody has noticed the flat polished sections yet!
Great job as per usual
Appreciate the full length video, I hate shorts! Felt the pain hearing that scrape in the beginning.... Goodyear Asymmetric sport tires have nice wide beads meant to protect your wheel a bit, maybe look into those instead of unsightly rim protectors.
Brilliant mate.
Love it! Well done mate.
Bother on the Beechwood ;)
Haha!
Why didn't you use the polisher with sandpaper discs instead of hand sanding ???
Ahhh mate, I get livid when I do this, but in urgent situations its not hat you need. Nice work young sir!!
About time!!!!!!!!!!!!😊
I had to kerb my fake Ferrari wheel to get an upload done for you in time!
@@CarCleaningGuru 🤣🤣🤣👍
Aw man, good accurate job!!!
Jb weld dremel tool sand paper and paint. Fixed a few good as new if just rash no bent wheel
Great job! Looks like new.
At certain angles 👀
Great Video Bro ! I would also try different tires with more protection….like Michelin tires with better side wall protection.
Had to be this stretched to avoid scrubbing 😩
I want one of them Hondas. Btw those rims are savage!!
Used to have a CRX so it made sense 😎
What kind of wheels are those
Can you explain me please what kind of paper are you using for sanding.Are they wet kind of sanding???
Thanks for the video!
Could you not use a small rotery sander ?
Nice vid guru
Good video and nice wheel
Merseyside, greater Manchester, loony drivers everywhere 😂 thats a cracking repair, id be well pleased with it 👏👍
Done this type of repair a few to many times 😂
Yeh that’s it for me now recolour/refurb next time!
@@CarCleaningGuru Definitely. Been quite lucky on my latest car I haven't done anything yet, but it's only a matter of time with all the potholes around.
You may have to keep going back over the edges of the rim with compound to keep the shine, as the wheel will now have areas where you lost the protective clear coat. If you keep on top of that, they should still be fine.
The tires look like the actually don't protect the rim as they normally do. Could simply be a fitment issue that could have prevented this much damage.
Yeh intentionally undersized to prevent arch scrubbage so zero rim protection 😩
Some tyres incorporate rim protection in the sidewall, some do not - looks like these are the latter as there is almost no lip - even if they were 10 mil wider I don't think it would have helped too much as the sidewall design just doesn't seem to have much rim lip.
Thinking of try this out on my wheels - will a wax be sufficient protection for diamond cut wheels that are currently clear coated?
If it’s kept topped up yes but even if it greys a light hand polish will restore shine.
What about the lacquer that’s often applied to machined wheels? Scratching that off is going to allow water to further damage the opened face.
Keep them protected with something and give them a light polish once or twice a year and they’ll be fine.
Was the start of the video near runcorn
Aye!
Thank you soo much ❤❤❤❤
Dashcam b-roll ftw 😂
Great video and results for DIY. What brand/make is the wheel holder when cleaning?
Those diamond cut finishes are a pain in the ar$e - I caught both NS wheels on my S2000 on a low kerb near Cheddar Gorge soon after the rears had been replaced due to corrosion 😭 I managed to tidy up the worst of it but didn't go as far as polishing, just took out the gouges and sprayed some clear lacquer over them - it still bothers me but after seeing how they handle wheels even at a "careful" tyre place where I was watching over them I can't justify doing it properly and sods law it will happen again so I've tried to not let it bother me so much 😳
P.S. Love the caption clips at the end 😁
My first RimRash came when my mother borrowed my car.
I felt it was grounds for a lifetime of jokes and i still use it as excuse ;)
great result! wondering what make/model that mini polisher was?
Autobrite Direct MP4 although I think this has been discontinued for a new model now.
looks much better than a damaged rim.
“Poverty spec elbow grease” 😂😂
Subbed. lOVE THIS GUY,
Flashbacks to having a Tesla with those scuff magnet grey wheels, I hid the scuffs with Alloy Gators before selling it... Great repair and nice dashcam footage but I'm glad the rozzers are pulling people for tinted plates. I'm sure you don't do this but most people with them use them as an excuse to drive like a tool. Usually BMWs, Audis and the odd Golf GTI.
I just think they suit the car nicely, nothing to do with not wanting to be seen as the rest of the car is quite in your face. Everything is legit, cameras, wardens, rozzers etc have all been able to read them and if I caused an accident wouldn’t be making off in a manner a witness would need to read them so it’s a complete non-issue in my mind 🤷♂️.
Great video CCG!!! 😁👍🏻 do you think this could also be performed on a aluminum wheel that has been clearcoated?
Unpainted but lacquers yes but you will have to either re-lacquer or keep protected with something more superficial.
Before putting the alloys back on and hopefully torquing up the wheel nuts, did you make sure the bottom of the Honda badges were perfectly aligned with the tyre valve on each wheel? Dealerships and tyre fitters never do this. It drives me nuts.
Those tyres seem to have rim protecting circle on the rubber but the rubber sits so far in it does not contact curbs first..?
Yep!
will this work on flaking rims as well due to road salt exposure?
Halfords in Wallasey?
Oh aye!
Could you use autosol metal polish, Mr GURU?
Yes! I’m just more familiar with the abrasives in paintwork polishes than in metal ones.
I have always loved your wheels. What is the Brand? I just scuffed my rear wheel today going to work; whic is why I’m watching your video today👀👌🤜🏽
Sorry if I'm being stupid but I think I need paint for my wheels if I'm going to sand them. Am I wrong ? Or I can do what you did?
This will only really work for diamond cut or polished metal wheels unless, as you say, you’re prepared to repaint things afterwards.
Should I buy the turtle wax 1 and done compound or autobrite duo 2 in 1 paint and polish? I have a ford fiesta zetec model with a small-ish scuff along one of the wheels :( This video is brilliant btw.
Not much in it for a post sand wheel polish to be honest but I definitely prefer the TW for single stage polishing paintwork.
Hi there do you have the link for the brush bit you used? Thanks
that was wheely good 👍
What kind of wheels are these!?!!
Is this method going to work on the black wheels 🛞? Paint it black of course in the end.
I wouldn’t bother trying it with painted wheels unless you’re really handy with the paint!
@CarCleaningGuru Thanks for the replay! I probably should mention, that I will paint in black only the bord ( 10mm max ) of the rims, not the whole rims.
Regards
nice job
You like New Brighton i see 😊
Waw super work.
Love jib ,who maker of those wheels
River, not the best quality tbh but look nice.
Why are the tires so misfitted that the rims stand out? Almost bought a car with such a combo that came from Tire Rack as a “kit”. Why would pros sent such a combo out? Bad setup IMO.
Any wider and they would scrub all the time as the arches are only small. Not ideal but allows me to have the wheels on the car.