Thanks for watching our channel. The best way to get parts for your Genie AWP20 push around vertical mast lift is to contact your nearest authorized Genie dealer. Just go to genielift.com and click the "find a dealer tab" located at the top right of the Genie home page.
Hi guys, good informative video, thank you. I Have a question, I have a awp 30s, which for some reason is not raising, pump is running, fluid topped up and a fresh battery, I slightly loosened hydraulic lines at the pump and it is pumping fluid. Any ideas? Any help would be massively appreciated. I should add, outriggers are all correct and estops disengaged
@@JacobParkYusuk Hi Jacob. There was a small Valve after breaking somewhere along the track on the machine. Sorry I can be more specific. according to the company that repaired it they reckoned it happened when it was being transported in it's flat down position and got a bad knock or fall which snapped the valve.
When I tern the key to the right all 4 lights are on and I have bothe buttons out and the pump will kick on but it won't lift. What do I do to make it lift.
Thanks for watching our channel. It sounds like you have both the upper and lower E-stop buttons out, key switched to the right (on the lower controls) in order to send power to the platform controls and all 4 of your outrigger indicator lights are on letting you know the outriggers are properly installed. If once you are in the platform, you are depressing the black function enable button (located just below the E-stop) on the platform controller, while simultaneously twisting the lift control to the right (clockwise) for lift and to the left (counter clock wise) for down, you are doing everything correctly. At this point if the lift is still not functioning properly there are several different possible issues. We recommend contacting your nearest Genie aerial lift dealer and schedule a qualified service tech to diagnose the problem.
Thanks for watching our video. The Genie AWP 20-S has been designed so that one person can easily load it in the back of a pickup truck, but it's not ideal for climbing stairs.
Thank you for this very informative video😃👍
excellent instruction, thanks
genius love it
Thanks for watching Chad!
Helpful video, thanks!
On my break rn I was gunna have to figure all that out myself thanks
You left out the part where the wheels should be slightly off the ground if the outriggers are used correctly.
Thanks for the video I loved it I have a question Will it fit through a regular size front door of a home.
Well done
Muchas gracias 😊
Great video, thanks. Does the Genie 30s model also fit in back of a pickup truck?
Great video! I'm thinking about renting this machine to install a chandelier in my home.
Tighten mast. How we do that? Service the chain when loose.
Thanks for the helpful vid man.
Awsome,very helpful.
How i will get LED light there is any way to order
Thanks for watching our channel. The best way to get parts for your Genie AWP20 push around vertical mast lift is to contact your nearest authorized Genie dealer. Just go to genielift.com and click the "find a dealer tab" located at the top right of the Genie home page.
Hi guys, good informative video, thank you. I Have a question, I have a awp 30s, which for some reason is not raising, pump is running, fluid topped up and a fresh battery, I slightly loosened hydraulic lines at the pump and it is pumping fluid. Any ideas? Any help would be massively appreciated.
I should add, outriggers are all correct and estops disengaged
Same problem here... did you ever get it working?
@@JacobParkYusuk Hi Jacob. There was a small Valve after breaking somewhere along the track on the machine. Sorry I can be more specific. according to the company that repaired it they reckoned it happened when it was being transported in it's flat down position and got a bad knock or fall which snapped the valve.
When I tern the key to the right all 4 lights are on and I have bothe buttons out and the pump will kick on but it won't lift. What do I do to make it lift.
Thanks for watching our channel. It sounds like you have both the upper and lower E-stop buttons out, key switched to the right (on the lower controls) in order to send power to the platform controls and all 4 of your outrigger indicator lights are on letting you know the outriggers are properly installed. If once you are in the platform, you are depressing the black function enable button (located just below the E-stop) on the platform controller, while simultaneously twisting the lift control to the right (clockwise) for lift and to the left (counter clock wise) for down, you are doing everything correctly. At this point if the lift is still not functioning properly there are several different possible issues. We recommend contacting your nearest Genie aerial lift dealer and schedule a qualified service tech to diagnose the problem.
I have problem when lift up reach 20m something like that.motor slow function...why?? Anybody can help?
I am OPERATING SENDHA MARI ENGINEERING PRIVATE LIMITED
How high will it go?
Thanks for watching our video. The Genie AWP 20-S has a maximum platform height of 20 feet.
Thanks you
Thanks!
كم السعر لو سمحت
5 year back in shoulder loading
It’s fuckin Matt! Fuckin Matt Foley!!!
Far out this guys is shouting his sales pitch- hes even irritating his own throat 😄
😂
Uyu 0:42
Been loading these wrong for years smh
The worst thing ever is this machine should no be allowed on construction site
This guy is so annoying
Love it
Can you get this thing up one or two steps?
Thanks for watching our video. The Genie AWP 20-S has been designed so that one person can easily load it in the back of a pickup truck, but it's not ideal for climbing stairs.