Please reply 😢Sir i have an issue i was on step to upload the firmware file but by mistake i have uploaded the wrong file and i it is not getting reset and im unable to new firmware because not the rest button is not working
I really want this type of video because the internet 🛜 depend or WiFi blutooth depending is time consuming we have to go to that particular app of web then control that application it's very time consuming that's why it's very important I love this ❤
Hi bhayia Can you make playlist of how to install components like capacitor, inductor , resistor etc with some basic electronics engineering knoweledge It will help me a lot…
Hey add esp32 as a external controller to this project, and program it for esp Rainmaker. So that if internet is there then u can control the home from any where, as well as u can have offline voice cmds.
He is the Boss❤️, Much love from Nigeria 🇳🇬, please the uart video communication is much needed boss ,i.e communication through the rx and tx pins of vc 02 module, through hex
Aside from using their website to prepare firmware for these module, is using vscode or similar still an option to prepare firmware locally? Do they offer programming using platforms like arduino or micropython?
Do you have any company where we can build a custom built sbc with specification and is is a company we can build based on requested design and ship to us? If so can you create a one video on it Thanks Sri
Why hard-wire when you can control using a hub and smart plugs, smart outlets and bulbs. For most smart home products Python libraries are provided for use with Arduino and this and other speech recondition modules from various sources.
Yes definitely make a video adding a microcontroller with this VC-02. But I think the cheapest solution is that you did in your smallest home automation project.
Yup! we need that video with the external microcontroller
Yes of course, definitely "yes" Master.
Make a video adding a microcontroller please. Greetings from Chile.
Ok
Your wish is my command
But the video will take some time as the modules are currently out of stock
@@techiesms how to connect rgb light strips uding this device please make a video , i wanna buy this device from your website
Can we integrate this voice assistant with home assistant?
This guy really makes some useful video!!!
Glad to hear that! 😀😀
Please reply 😢Sir i have an issue i was on step to upload the firmware file but by mistake i have uploaded the wrong file and i it is not getting reset and im unable to new firmware because not the rest button is not working
yes do a video on external microcontroller
Sure
Once the module comes in stock I’ll try to make the video
Waiting for the external microcontroller video!!
And also a blog about this project so i can get a list of components and try doing the project !!!
External mic means it will helps in more ways ... Like we can use this for yelder / patient peoples 👍✅
I really want this type of video because the internet 🛜 depend or WiFi blutooth depending is time consuming we have to go to that particular app of web then control that application it's very time consuming that's why it's very important I love this ❤
Hi bhayia
Can you make playlist of how to install components like capacitor, inductor , resistor etc with some basic electronics engineering knoweledge
It will help me a lot…
Hey add esp32 as a external controller to this project, and program it for esp Rainmaker.
So that if internet is there then u can control the home from any where, as well as u can have offline voice cmds.
Techiesms video came!! First hit the like button then start watching video.
Please upload video on external microcontroller using UART with vc-02
Thank you so much 😊
And sure, as I got a lot of demand about this I’ll make a video on connecting external microcontroller with vc02
Hello Sir Can U share the link of the previous video in which you did the setup of vc02 in detail
Is it true that vc02 we can only use UART TX but not Uart Rx, yep make a video with microcontroller communication
He is the Boss❤️, Much love from Nigeria 🇳🇬, please the uart video communication is much needed boss ,i.e communication through the rx and tx pins of vc 02 module, through hex
Coming up this Sunday…..
@@techiesms love this thanks so much boss ❤️❤️💥
Aside from using their website to prepare firmware for these module, is using vscode or similar still an option to prepare firmware locally? Do they offer programming using platforms like arduino or micropython?
Sir what is cost of this project
How tu turn on tv or ac?
Hi Sachin, nice video as always! I just want to ask you why you put that orange capacitors (if they are capacitors), what's their purpose?
Please make a video on uart communication of vc02
Why I can't able to register my account it's show mobile phone error
You make home automation using esp32 and 4g gsm module in blynk application app
I’ll try with 4G
Do you have any company where we can build a custom built sbc with specification and is is a company we can build based on requested design and ship to us? If so can you create a one video on it
Thanks
Sri
Obviously try an external microcontroller and also try to interface i2c GPIO Expander module to increase the number of usable GPIO pins.
Hi, im pasky from indonesia. your new subs.
yo its soo great!! u have the schematic diagram for these?
It’s in the video itself
Why hard-wire when you can control using a hub and smart plugs, smart outlets and bulbs. For most smart home products Python libraries are provided for use with Arduino and this and other speech recondition modules from various sources.
can you pls explain a bit more
Plz make a tutorial how you controlled the fan speed with those gpio pins.
how many times can I burn the firmware to vc-02?
Can we use this device for controlling ur10 manipulator robot through voice. Plz reply
I haven’t used that so can’t anything
But this module works with any controller with UART communication
Good job sir
Can I add a manual button?
yes , please do a video n external microcontroller where in we need more IO.
Please make a video on how to send commands to external micro controller
Sure
We will make it as we got a lot of demand about it
But it will take time as we are currently out of stock with vc02
Thanks 👍
Welcome 👍
Hi, think you for your important and helpful videos. Do you ship to US?
Yes
Just WhatsApp your requirements on +91 8200079034
@@techiesms Thank you
If you add remote control light on off with the voice then it will be very good project
Can you make videos on home assistant and esphome. Haven't seen any Indian making content for it.
Already made it sir
Sir do you have a schematic diagram?
Please make a video configuring this with external board
Suree
yes ,please make a mini table robo which has expression like EMO robo, which can control some of these actions alsoo
using these ai thinker
What is the name of the relay
Is here any one, who tell me how can i download the gerber file /schemetic diagram please
THANKS A LOT . MicroControl using ON this Board , PLEASE make video ... PLEASE💝
Okkk
Will make the video on that once the module comes in stock
Hope You do for us the next vedeo external controler
Sure
Not the next one but I’ll make the video once the vc02 comes in stock. Currently it’s completely out of stock
Why there is a X2 capacitor?
Please give all components links and discription
Sir please provide gerber file 🙏🙏🙏 of the pcb
Video with the external microcontroller, Please.
Already made and one more surprise video coming tomorrow related to this
please make a video how to connect it to an arduino.
It willbe more effective when manual and voice both willbe organised
explain a little bit pls
Create ai assistant which use chat gpt and google assistant but talk in hindi
Purchase link please
techiesms.com/product/offline-voice-recognition-home-automation/
Currently out of stock but you can WhatsApp us for advance order
I would like to buy it but it is out of stock 😢😅
It will be available after 10-12 days
@@techiesms I want some changes in it would you provide me
Can you send me your pcb board design
External microcontroller
Yes definitely make a video adding a microcontroller with this VC-02.
But I think the cheapest solution is that you did in your smallest home automation project.
Sure
I’ll try to make video on that
Yes
Yes sir
yes
Yes plzzz
Give pcb file
Yes I.
Pcb diagram dalo bhaiya free me pls
PCB Gerber file
Money money money
Yup! we need that video with the external microcontroller