Wow that is pretty slick, thanks for sharing this. I run a motec and its an amazing ecu but bejezes you have to buy every fricken pin for the wiring and do it yourself. I had a PnP kit and to add things was generally easy but not Haltech Easy. I like that its a built in PDM. Would you share when you make the wiring harness what you use all those 8amp and 25Amp connections for? What if you need more 25 amp connectors, do they have an expansion box that will get the amperage data on CAN? This is really slick and may find its way into my next project.
Will do and they sure do. They released their PDM (PD16) shortly after. Expansion: 10 x High Side Outputs 2 x Half Bridge Outputs 4 x 25A High Current Outputs 8 x Inputs + Dedicated Ignition Switch Input Power for Ignition Switch Integrated into Haltech CAN Bus Network 5V Sensor Supply / Sensor Ground 120A SurLok Connector
Haltech is a freakin game changer. Question, with an R3 and a PD-16 or an R5... Can you wire the master disconnect switch to shut everything down without using all the fancy contactors and whatnot? Or is that still needed? Also, I noticed that even when you have something in your hands... You still talk with your hands!
Super sick setup & the support you get is top notch compared to others, Haltech for the win!
Thanks for the video! Wish her a happy birthday!
Epic setup😍
Happy birthday 🎉
happy birthday young lady
Wow that is pretty slick, thanks for sharing this. I run a motec and its an amazing ecu but bejezes you have to buy every fricken pin for the wiring and do it yourself. I had a PnP kit and to add things was generally easy but not Haltech Easy. I like that its a built in PDM. Would you share when you make the wiring harness what you use all those 8amp and 25Amp connections for? What if you need more 25 amp connectors, do they have an expansion box that will get the amperage data on CAN? This is really slick and may find its way into my next project.
Will do and they sure do. They released their PDM (PD16) shortly after. Expansion:
10 x High Side Outputs
2 x Half Bridge Outputs
4 x 25A High Current Outputs
8 x Inputs + Dedicated Ignition Switch Input
Power for Ignition Switch
Integrated into Haltech CAN Bus Network
5V Sensor Supply / Sensor Ground
120A SurLok Connector
🎉
Haltech is a freakin game changer. Question, with an R3 and a PD-16 or an R5... Can you wire the master disconnect switch to shut everything down without using all the fancy contactors and whatnot? Or is that still needed?
Also, I noticed that even when you have something in your hands... You still talk with your hands!
Sure can, I use a solid state cutoff
Tell her we said happy birthday so you don’t get in trouble
Clapd,how’s life?- how gorgeous upload,till next time. )
Tell her happy birthday. But can you run a transmission off of it too?
Sure can