Your undying optimism and energy to push forward is very inspiring, and it helps me whenever i feel down about my drumming technique. Thank you for your videos!!
8:25 In order to give your springs more strength, an idea would be to create this spiral by cutting along the grain (wood layers overlap on top of each other) rather than against the grain (cutting through the wood fibers) which you have done here. Cheers! May the best Yaruki be Motivated!
@@dontghostbanmeplz8788 I'm not sure, cutting against the grain (meaning through the fibres) requires a lot more force than along the grain. It is far easier to delaminate (separate the layers of) the wood fibres than it is to cut through them.
Hello, I am Taiwan University's student. I really appreciate you sharing these videos on UA-cam, these videos that me know a new way to processing wood.
Try putting your rod at an angle of 60 degrees or so instead of 90 degrees to the blade. Can angle the back of your jig that your stop blocks and J support go up against. Or use different wedge shaped pieces to achieve different angles against the square back of the jig.
Cutting the spiral is a similar process to how screws in wood were first made. And you can still buy the tools (well, in the US and UK you can) to cut threads in wood by hand.
Всё намного проще. Надо не двигать каретку по столу. Надо вращать заготовку. А угол вращения (шаг спирали) задаст лезвие ножа. И не будет ступеней совсем. Решается за минуту и не надо опытов многомесячных.
OK, I am no carpenter, but I'm pretty sure, this can be solved better, by using a lathe + the mechanics used for turning screw threads there?!?! Or is it just showing off how to do complicated things by hand?
thank you for taking us along developing your technique 👍🏽 amazing what you developed by not giving up but by continuing 👍🏽 that called real determination 👍🏽
Ja, eres tremendo loco de la madera😂. Y eres muy bueno quebrando la también 😊. No pares nunca. Sigue inventado que por aquí en Venezuela tienes un admirador. Un abrazote loquito
Кто видит,как Японские "мастера" просто "вырезают" дерево? Лично я вижу,как оператор станка работает. причем настройки-самые обычные. любой,кто занят на деревообработке,сделает не хуже.
こんな感じのお芋のスナックあるよね
そのお菓子は知らないけど絶対美味しい
ドラゴンポテトだよ🐉
@@bridgerun2 あれって芋なんか?あ、そっかジャガイモか
それなら分かる、おいしいあれ
ハリケーンポテト?
@@Q急転 そんな感じのやつ〜〜
同じ切り目(いや何て言うの?)の連なりの美しいことよ
昨今頓に模様の連続を目にするや即無の境地に陥りがちなわたくしには、この螺旋製作時における集中力こそ感嘆に値する
いやいやすげえよ
7:52 ここ、きれいになっていくの気持ちいいなぁ。
最初のもドット絵ぽくってかわいいなw
もともとやる木の発想も面白かったけど、それをさらに極めるとこんなことまで出来るようになるのか...
まさに天才!
木材を切る映像はいつ見ても興味深いですね。
あんな材料で作った椅子は本当にふわふわだと思います!
3:41~
アルキメデスのネジ
Your undying optimism and energy to push forward is very inspiring, and it helps me whenever i feel down about my drumming technique. Thank you for your videos!!
お約束の「あっ(°Д°)」が好きw
既にウッドカットアーティストですw
もの作りに伴う試行錯誤。それ自体を楽しむって考え方を学べるチャンネルで本当に素晴らしい。
A super imaginative artist like yourself will never need worry about A.I., you're too unique!!! 😍
So cool! Your skill has really grown! Cannot wait to see more!
ついに螺旋を作れるようになったんですね…凄過ぎる…
UNMOTIVATED WOOD NOTIF!!
5:46 「ワァオ」マジで好き
i love your videos! always puts a smile on my face 😊 it’s so interesting to watch your progress and your persistence is inspiring! keep it up 👍🏼
丸のこだけで螺旋・・・・すげぇっす。
人間は考える螺旋・・もとい葦ですな。
楽しめた‼️4ヶ月はすごい‼️
子どもの頃、菓子箱の紙を格子状に組み立て、引き出しの仕切りなんか作って喜んでいた事を思い出した。試行錯誤している時って楽しいよね。
Suspensions are ready.
Now make a car bro 🙌🏼🏅
❤ From Bangladesh 🇧🇩
8:25 In order to give your springs more strength, an idea would be to create this spiral by cutting along the grain (wood layers overlap on top of each other) rather than against the grain (cutting through the wood fibers) which you have done here. Cheers! May the best Yaruki be Motivated!
That’s really great idea 👍
How easy is it to create a cylinder against the grain?
@@dontghostbanmeplz8788 I'm not sure, cutting against the grain (meaning through the fibres) requires a lot more force than along the grain. It is far easier to delaminate (separate the layers of) the wood fibres than it is to cut through them.
いつも治具の作り方が面白いなぁと観てます。ついつい、お?!😳とか、あぁ!😲とか、イェイ!🙃とか出てしまいます。愉しいっ🎉
I think it “wood” be fun if you poured paint down the spiral. Might make interesting patterns.
Hello, I am Taiwan University's student. I really appreciate you sharing these videos on UA-cam, these videos that me know a new way to processing wood.
You are so talented!
1:35 おお。角度って変えられるのですね!
今回もありがとうございます。いつも楽しみしております。
7:53 おおおおおお!!!!、ってなりました。感動しました!すごい、、、
Try putting your rod at an angle of 60 degrees or so instead of 90 degrees to the blade. Can angle the back of your jig that your stop blocks and J support go up against. Or use different wedge shaped pieces to achieve different angles against the square back of the jig.
Yes angling in two dimensions should be able to have the cut aligned with the spiral.
幾何学的で綺麗
I would love to see him make two spirals of different woods and then screw them together.
オーパーツとか言われてるなんとかの螺旋階段作れそう!
初代やる木からはるかに応用されてて理解が追いつかない
不思議な形ー 何でこうなるのか見ても説明されてもよくわからん
すごい…
39万人おめでとう!
試行錯誤がすごい
そのうちもの凄いもの生み出しそう
Cutting the spiral is a similar process to how screws in wood were first made. And you can still buy the tools (well, in the US and UK you can) to cut threads in wood by hand.
Tellement beau 😮❤
🌿
Fantastisch, so eine tolle und interessante Arbeit habe ich noch nie gesehen gefällt mir super gut
そろそろ個展開ける
なんかわからんけどすごい!
Всё намного проще.
Надо не двигать каретку по столу.
Надо вращать заготовку. А угол вращения (шаг спирали) задаст лезвие ножа. И не будет ступеней совсем.
Решается за минуту и не надо опытов многомесячных.
Классная работа!!!!👍👍👍👍
わお
Мда уж увлечённый человек , заморочился так заморочился . Но решение нашёл , молодец
It fascinates me how commenters from different parts of the world usually have better grammar than most Americans commenting.
Unmotivated Wood is one of my favorite things. It's very relatable.
When i simply cut wood that never happens...so i have to question the accuracy of your claim.
Это просто офигенно!
It’s a helix, not a spiral.
But it’s still very clever.
Can anyone tell me why this is making me hungry right now
Bro, I love your videos and vibe. You seem kind hearted and genuine. Thank you for the work, it’s really enjoyable to watch. 🤙
元々のつくり方でリニアに廻しながら棒を押し出せば
ギザギザがなくなる気が
リニアに回すとはなんでしょう!?
旋盤の雄螺子加工みたいにくるくると連続して回す感じのような?
@@newmarimo
それだと、丸鋸の刃のついてる部分(円周面)以外で
切削することになる、ような気がします。
横引きの手鋸のように、大きなアサリが付いてるなら
ワンチャンあるかも、と思いますが。
Why you are not using safety gaurd?
Bomboş bir iş...😂
強度もないし、何にも使えない技術だし、まじでYou Tubeでしか役に立たない技だから今まで誰も掘り下げなかった切り方だろうな。
実用的なら宮大工みたいな人がとっくに発見してるだろうし
Las posibilidades son infinitas.😊
OK, I am no carpenter, but I'm pretty sure, this can be solved better, by using a lathe + the mechanics used for turning screw threads there?!?! Or is it just showing off how to do complicated things by hand?
Bonjour 🇨🇵 beautiful '' fight '' you are the winner! 👏👏👏👏👍
Можно вместо амортизаторов на автомобиль поставить.
thank you for taking us along developing your technique 👍🏽
amazing what you developed by not giving up but by continuing 👍🏽
that called real determination 👍🏽
Helix, not spiral.
ランプシェードにすると面白そう
1 question: What is it for?
اعملها بلمخرطه ياعبقري
sharpen your damn saw
So Beautiful and creative! GOD Bless You!
What oil did you use?
えーギザギザのが素敵なのに勿体無い💦
일단 목제에 나선형을 그린다 ᆢ 그러면 더쉬운게 보일꺼임~
面白い!ごっつぅ面白い!試行錯誤の過程が大好き!!カクカクの螺旋も面白いね。既にウッドカットアーティスト(だっけ?)じゃないですか!!子供が不思議がるおもちゃとか、大人も「ん?!」てなる置物とか作って欲しい!やー、面白かった、またチャンネル覗きに来ます。あざしたm(_ _)m
Fun-tastic ! Can't wait to see table legs ,lamp etc with resin . Maybe send your design over to some fun channel that does resin and wood .
Один вопрос. Нахера?
You need a spiral drive progressed with a hand crank while parked on the blade with your targeted wood blank.
The major division rule for cilindrical objects is to have them at 12 sections
well done, good work. I have a question for you: if you take a tree - willow, how strong will the spiral turn out?
これって学問的には幾何学とかになるんですかね?(無知)
切る方向や順番の工夫から基礎的な想像力までいつも驚いてます
最後に出てた薄いカクカクの螺旋で何故か黎明期のボカロ楽曲が脳裏に浮かびました
電子感が似てるのかな
Simple but clever techniques. Cool video
スゴイキレイな螺旋💡
ウッドカットアーティスト良いですねえ✨
That is anamazing way to make wooden spirals , or springs 🤔 😊👍
Can you put a different sawblade on that has more teeth maybe the wood would come out better?
You have much more patience than I. Great patience and technique.
Thank you!
訳の分からない造形の木材がたくさん・・・歴史を感じる
Aquí en España se dice quién la sigue la consigue Enhorabuena
何かに似てるなと思ってたらサムネのやつグルグルポテトにそっくり!そしてその事実に気づいてからこころなしか美味しそうに見えてきた🤤
Very good😀
美しい、嗚呼美しい
Sorry, but what ist the sense to cut this gaps in the wood ???
For what?
Great
Ja, eres tremendo loco de la madera😂. Y eres muy bueno quebrando la también 😊. No pares nunca. Sigue inventado que por aquí en Venezuela tienes un admirador. Un abrazote loquito
🍅この木材は素晴らしい!
幾何学的で美しい!🍅日本人です 外国人が頑張って翻訳したみたいな文を作ってみた
Керемет
すいません関係ないんですけど真空にしてるあれ、なんてやつですか?
felicidades Ya eres un ARTISTA, nice job
Кто видит,как Японские "мастера" просто "вырезают" дерево? Лично я вижу,как оператор станка работает. причем настройки-самые обычные. любой,кто занят на деревообработке,сделает не хуже.
竹でやっては?
like
Show
支柱のない螺旋階段思い出した💡
いろいろやってみてやっと出来た形なんだろうなぁ
スプリングウッドですね🤔
トルネードポテトにしか見えなくてわろた