@OhidEnt too many to name... but the big ones are the garrett ball bearing 78 trim, and 1600cc injectors, stand alone power fc, bigger fuel rail, race ported motor w/ 3mm apex seals, lots of others....
@OhidEnt when it was bone stock it made about 260-250. with the twin turbo set up. now there has been more 100 grand put into the body and engine bay. about 30 of it has gone to the engine. but i still need to do some powder coating and engine dressing.
Yes. You can. I hope I'll get one when I get older. they cost around 10k - 15k for the car and another 12k for the body kit + the paint job. Since these cars are old you'll most likely have to get some mechanical work done, and if you have a car this good looking you have to make it run as good as it looks so you'll have to modify it mechanically a lot. That reminds me. I better hit the Books.
i love this car and i would love to take it off your hands but the price is way to much for me. :( how long did it take to put the bodykit on and the headlamps?
nice car, so beautiful. Im sure this car would smoke any newer supercar on the track too. 600whp and under 3000lbs? ya, amazing. I still wouldnt spend $65,000 on it though. around the $45K mark and I'd be interested. Most builds like this loose huge dollars after everything is said and done....
I'm only 15 right now but do you think it's possible for me to get one of these Veilside RX7s when I get older? I really love this car and the way it sounds!!!!!!!
In the US you'll only find 1993 - 1995. There were only 500 1995 models so those ones will be more expensive because they are more rare. but yeahh I think its only the 1993 - 1995.
nice choice, orange and black is definitely a beautiful color. an extreme attention grabber. depending on the shop and where u r located the price may vary. are u in florida?
I really want this car so bad!! It's gonna cost a lot but I know stock rx7s should be less than 13-14. Haha start reading about how to modify and fix cars?
Well... the thing is, The mazda rx7 or any Rotary engine is hard-er than a usual engine car. You'll have to find a mechanic with experience with rotary engines.
Nah... Just take it to a Mazda dealer ship since they're still making the Rx-8 which also has a rotary engine. so they will know how work on this cars the things is that it might cost you extra.
lol im only 22 bro, plenty of time left in my life to get a car like that. Im not dead yet nor am i poor so my rebuilt 240sx SR20 is good enough for a college student like me. However, what i am though is not a bullshitter or an idiot so if and when i do buy a car that expensive,ill be sure to buy one from someone who's head is not in the cloud thinking he's gonna be able to sell a car like this for 65k. lol oh and unique doesnt mean its not ugly. FAST! but still ugly.
i love this car but for those who love like i do take your anger out on this guy : a7x4REVer97 : he keeps giving me shit on how crappy these cars are. he obviously doesnt know anything!!!
hahaha 65 k for this? uhh no. You can get a brand new porshe or etc with that kind of money. I saw your ad, way to exaggerate your car. its worth maybe 20k but not 65. get over yourself.
when i'm a bit older and i am finished my auto technician apprenticeship i want to build a 4rotor veilside definite dream car
Nice work mate the fd looks great but please do us all a favour and lose the music and upload the next dyno run video!!
im in love with your car... i wish to see more.... PLEASE!!!!!
fast and the furious tokyo drift...
@OhidEnt too many to name... but the big ones are the garrett ball bearing 78 trim, and 1600cc injectors, stand alone power fc, bigger fuel rail, race ported motor w/ 3mm apex seals, lots of others....
To own this Veilside and the Nissan Skyline from 2 Fast 2 Furious is a dream!!!
You cant show your numbers, but you can show your paint! lol
Such a monster of an engine a great car!
Price: $15,000.00 for the bodykit
beautiful car
I'm curious to know how the car handles compared to a stock body kit rx7
Every mans dream i guess!! Nice man!!
@OhidEnt when it was bone stock it made about 260-250. with the twin turbo set up. now there has been more 100 grand put into the body and engine bay. about 30 of it has gone to the engine. but i still need to do some powder coating and engine dressing.
price went up . but i paid 15 grand with shipping,tax, and customs
Yes. You can. I hope I'll get one when I get older. they cost around 10k - 15k for the car and another 12k for the body kit + the paint job. Since these cars are old you'll most likely have to get some mechanical work done, and if you have a car this good looking you have to make it run as good as it looks so you'll have to modify it mechanically a lot.
That reminds me. I better hit the Books.
Can you please tell me how you started on this car in general, I mean before you even bought the veilside body kit?
thanks alot, i will do my best to get new vids up.
i love this car and i would love to take it off your hands but the price is way to much for me. :(
how long did it take to put the bodykit on and the headlamps?
what year mazda rx7 was yours????
hey man!....this have 13rew engine or else rotor engine?
AMS tuning??
well with paint and body work your looking at 5 grand...what color u going with?
how much did the body kit cost?
nice car, so beautiful. Im sure this car would smoke any newer supercar on the track too. 600whp and under 3000lbs? ya, amazing. I still wouldnt spend $65,000 on it though. around the $45K mark and I'd be interested. Most builds like this loose huge dollars after everything is said and done....
Love the rims!!!! Specific description pls??? Front and rear... Thanks!
isnt that body kit like 30 grand itself???
YES!!! not only sexy but work under the hood!
what modifications did u do and it cost u 30,000?
@PaperPIane thanks bro
damn a 4 rotor would fit perfectly in that badboy
I'm only 15 right now but do you think it's possible for me to get one of these Veilside RX7s when I get older? I really love this car and the way it sounds!!!!!!!
Would about like a stock Mazda RX7 from the 1993-1996? Because that is the one you would need for Veilside right?
@Futurensen thanks bro
thanks.
were did you buy it ?? I realy want one but i don't know were to buy and i live in quebec...
thanks bro
Where to buy the Mazda
i know... very devilish ! crazy
13b?
@deadlywideboDy thanks bro
forged specialties FS-5 19x9/19x12 on yokohama advan tires. 6,000 setup
500 cars of those now!!!!!!
In the US you'll only find 1993 - 1995. There were only 500 1995 models so those ones will be more expensive because they are more rare. but yeahh I think its only the 1993 - 1995.
What was the website?
Is that a single turbine?
Song name?
How long did you built this, bro?! Awesome!
I feel like Han's car of Tokyo Drift is really damn exclusive! lol
15 thousand. i got it from veilside japan. it's almost impossible to get now. you can still get it, but it takes alot of time
how much are you asking for the car.
Car was sold... I can build u one to fit your needs for 40k
40k that's a good price. You still building them?
nobody ask
i have an 2008 m3, ever think about trading?
how much horse power has this actually got? inbox me
nice choice, orange and black is definitely a beautiful color. an extreme attention grabber. depending on the shop and where u r located the price may vary. are u in florida?
I really want this car so bad!! It's gonna cost a lot but I know stock rx7s should be less than 13-14. Haha start reading about how to modify and fix cars?
how much for it?
666 hp ? HELL YES
Well... the thing is, The mazda rx7 or any Rotary engine is hard-er than a usual engine car. You'll have to find a mechanic with experience with rotary engines.
3 months, thanks
Whhat the pricee?
I want to know, my dreammm carr
What is your job! I want in xD
maybe if it is upgraded wih low miles
sure i will do that... just as soon as you transfer the money.... thanks
'Baby Twins Reaction 300HP Subaru GT' (Tripl3t TV)
My name is umberto and i will buy one when i'll be rich i said to myself then read BERTOISRICH and you with the car LOL sounds destiny XD
Nah... Just take it to a Mazda dealer ship since they're still making the Rx-8 which also has a rotary engine. so they will know how work on this cars the things is that it might cost you extra.
This is like car porn but better in some odd way =)
lol im only 22 bro, plenty of time left in my life to get a car like that. Im not dead yet nor am i poor so my rebuilt 240sx SR20 is good enough for a college student like me. However, what i am though is not a bullshitter or an idiot so if and when i do buy a car that expensive,ill be sure to buy one from someone who's head is not in the cloud thinking he's gonna be able to sell a car like this for 65k. lol oh and unique doesnt mean its not ugly. FAST! but still ugly.
95
65k
Body kits cost $12,000
I think this one sold on ebay for $30
Wow that sucks, then there probaly won't be any mechanics that know how to do that in 10-15 years
音聞かせろってんだww
maybe is that but you never going to have a unique and rare car....LIKE THIS..
I know own this car with a new power plant accepting offers
why not. xD
only 60k
i've seen it online for 10k
13b rew
i love this car but for those who love like i do take your anger out on this guy : a7x4REVer97 :
he keeps giving me shit on how crappy these cars are. he obviously doesnt know anything!!!
and...
beautiful car not people
Are you sure Mazda will still be alive in 10 years still? lol. Yeah probaly
666 max power haha
it fucking cost $60.000.00 Dollars
whats your email adress?
no
VEILSIDE JAPAN.com
hahaha 65 k for this? uhh no. You can get a brand new porshe or etc with that kind of money. I saw your ad, way to exaggerate your car. its worth maybe 20k but not 65. get over yourself.
bertoisrich@yahoo.com
no, i play on pussy.... no psp