You explained it very nicely and without sounding lecture-y, thank you! Completed my first two bracelets in under an hour immediately after watching. Best video I've seen for absolute beginner.
Thank you Paracord Planet! I followed along with the tutorial and I have found success with it! I hacked your technique and instead of fishing long length of paracord to form knots, I bundled the untied paracord with a small rubber band to avoid tangles. I think that would be helpful for other first timers as well. You could even suggest different color rubber bands to assist with the left and right side concept? Good Day Sir!
🎉🎉🎉 thank you so much🎉🎉🎉 I have searched and searched for a video I could learn from with all my learning disabilities. 🎉🎉🎉🎉 I just made my first ever bracelet.
Awesome video....just make sure when burning nylon, you wear a mask and do it in a ventilated room....apparently its a carcinogen and can cause harm to the lungs, I'm told. But my kids and i live your videos!
Hi, and thanks for the great feedback. Your safety is very important! You can also hold your Paracord near the bottom of the flame, not in it, for about three to six seconds. The idea is to melt, not burn. 👍
Hi my name is Sophia in when I am watching your videos you always say hey guys and I am in a 8 year old girl. is there a way that you can say Hey to everybody instead of just guys. I know that it’s a thing that people say but my mom says that without us, knowing it makes girls feel like, they’re not as important so we try not to just say that but I really like your videos. Thanks.
The way I do it is I measure the wrist like you said and all that but I have a jig maker and then I take one end of my string and tie just a little knot but not real real tight just enough for it's not tight so when I get done I can untie it and then finish it off I do the right side first and then when that little knot is on the left side and I think that same string and cross over onto the right side then left side and right side that's how I do mine and I leave just enough to where I can wax it together at the end I didn't mean to make it black but you know how it is but it doesn't bother me none and yes I have to put two fingers underneath make sure I got the measurement right and then I have to adjust my jig maker she's just about right so it's not 8 and a tiny half and yes I do get tight and clean as possible where I got two skins that are blister right now but that's okay that's part of my work
As ive mentioned Goldberg do some real quality 550. Maybe it's the cord ? I've had it happen a few times now with certain cordage. If you soak in cold water and allow to dry helps. Are you using 100% Nylon or polyester/blend?
Thanks for this video. I just started. I’m really getting into it. I made like three of these bracelets in the past two days and I’ve just started like last week. Thank you.👍👍👍❤️❤️
Hi! Here's what you'll do for a regular cobra bracelet...first, fold the cord in half. Then pass the fold DOWN through the opening on the buckle. Then pull the running ends through that fold and tighten to make a cow hitch knot. Then pass your running ends down through the other opening on the buckle and start your weave. Hope that helps!
Slow the speed down, at the top of screen you will see the last button that looks like a gear, tap on that and slow video to 75% or slower! I do this a lot cuz I’m hard of hearing! Hope this helps you.
I've just started making things. As an outdoorsman I've plenty of cordage and tie many knots. This however, is different! I use Goldberg seven strand 550 for a lot of uses. Not the cheapest but excellent quality. I've made one of these for practical as well as style. I've incorporated a BCB compass, ceramic blade and a nylon cuff key in the clasp. Great and informative video, easy to understand also.
Started learning for a work thing… now here I am with a whole new hobby for my adhd. 😂🎉❤
thank you paracord man trying to do this on my own nearly broke me
Adding on an extra inch. Wish I could do that 😢
Like if Michael sent you
😂😂😂😂😂😂😂😂
Thanks went through 12 videos untill yours simple and to the point now i can make and sell them at my flea market booth BOOM 😀 show me the money 😅😅😊
it was a long process but it worked out. and it was super fun
thx so much, I had absolutely no idea on how to do this, highly recommend this if you are like me.
Glad it helped!
Thanks for the easy to follow tutorial! It was really helpful and I just made my first bracelet!
That's awesome! Thanks for the feedback.
You explained it very nicely and without sounding lecture-y, thank you! Completed my first two bracelets in under an hour immediately after watching. Best video I've seen for absolute beginner.
Thank you Paracord Planet! I followed along with the tutorial and I have found success with it! I hacked your technique and instead of fishing long length of paracord to form knots, I bundled the untied paracord with a small rubber band to avoid tangles. I think that would be helpful for other first timers as well. You could even suggest different color rubber bands to assist with the left and right side concept? Good Day Sir!
Best tutorial 😊
Yo my ADHD roof but y put it out come out great i even make two , this and the fisher. Thanks great video very educative keep it like this man. 🤟🏿😎🇵🇷
🎉🎉🎉 thank you so much🎉🎉🎉 I have searched and searched for a video I could learn from with all my learning disabilities. 🎉🎉🎉🎉 I just made my first ever bracelet.
thank you! great tutorial!
This video is tight tight tight!!
🫶🏻✌🏻🧠🙈🙉🦄🐎🦮🪽🦜🦥🐾
just like my bracelet.
max palmucci says thank you
W
Wow 🤩 ❤ awesome
Thank you! 🙏🙏🙏
Awesome video....just make sure when burning nylon, you wear a mask and do it in a ventilated room....apparently its a carcinogen and can cause harm to the lungs, I'm told. But my kids and i live your videos!
Hi, and thanks for the great feedback. Your safety is very important! You can also hold your Paracord near the bottom of the flame, not in it, for about three to six seconds. The idea is to melt, not burn. 👍
I put in a tampon as well never be too safe
Hi my name is Sophia in when I am watching your videos you always say hey guys and I am in a 8 year old girl. is there a way that you can say Hey to everybody instead of just guys. I know that it’s a thing that people say but my mom says that without us, knowing it makes girls feel like, they’re not as important so we try not to just say that but I really like your videos. Thanks.
@@jodydyer8445 I knew this day would come. I just didn't know when.
Where can I buy this paracord kit
Can pony beads be added to this bracelet? Thanks
well good thing i have some paracord and a butt hole, i can get started then!!!!!!
Thanks bud!
The way I do it is I measure the wrist like you said and all that but I have a jig maker and then I take one end of my string and tie just a little knot but not real real tight just enough for it's not tight so when I get done I can untie it and then finish it off I do the right side first and then when that little knot is on the left side and I think that same string and cross over onto the right side then left side and right side that's how I do mine and I leave just enough to where I can wax it together at the end I didn't mean to make it black but you know how it is but it doesn't bother me none and yes I have to put two fingers underneath make sure I got the measurement right and then I have to adjust my jig maker she's just about right so it's not 8 and a tiny half and yes I do get tight and clean as possible where I got two skins that are blister right now but that's okay that's part of my work
After hitting my head on my desk and rethinking life itself I finally made a paracord bracelet. Thanks for the video.
You helped me a lot,,,'
,,,,,,,,,,,,,,
This video is very helpful because I believe that this braid is one of the most popular braids out there and it looks very stylish.
LUDZIE OGARNIJCIE POTRZEBUJE NORMALNEGO TOTURIALU CZEMU TO JEST 3+ SKORO MAM 46 I NIE UMIEM TEGO ZROBIC
My new fav channel Ty so much for helping me I need a birthday gift for my friend
Love this channel bro! Super dope content for a niche community
Hey Thanks!
So helpful! If kids do this help the kid or kids with the lighter and scissors/knife.
Wow !!! Thank you. Just beginning to play with this type of cord. 🦋
What do you do to not get the twist on my court bracelet😻
As ive mentioned Goldberg do some real quality 550. Maybe it's the cord ?
I've had it happen a few times now with certain cordage. If you soak in cold water and allow to dry helps.
Are you using 100% Nylon or polyester/blend?
Great video, however, when finished I had the buckles wrong and need to wear it inside out. I followed the tutorial and used a jig. Hmmm..
I see what I did wrong. I didn't do the second knot the second knot as he said to. I didn't alternate the knots.
Ima just super glue it bc i dont have the money for special mask and special room
Great job explaining those knots. Thanks a lot, worked well for me!
I did my first but it like...pigtailed?
Thanks for this video. I just started. I’m really getting into it. I made like three of these bracelets in the past two days and I’ve just started like last week. Thank you.👍👍👍❤️❤️
That's awesome! Keep up the good work!
Every video I watch doesn't show how to get the final buckle on
Hi! Here's what you'll do for a regular cobra bracelet...first, fold the cord in half. Then pass the fold DOWN through the opening on the buckle. Then pull the running ends through that fold and tighten to make a cow hitch knot. Then pass your running ends down through the other opening on the buckle and start your weave. Hope that helps!
Do you have a video like this for your 1” clip?
Very nice video very clear tutorial thanks.
THANK YOU VERY MUCH !!!!! THIS IS MY FIRST AND MOST FAVOURITE BRACLET I EVER MADE AND TEACHED BY YOU!!! MAY GOD BLESS YOU!!!!!!!!😆
Glad to hear it! Keep up the good work!
Where do u get the clips what size?
Where can I order this paracord kit beginner's plz ..liz
Here you go! www.paracordplanet.com/cobra-bracelet-kit/ ✌
Can I order my first kit for beginners plz.liz
Here's a link to that beginner's kit! www.paracordplanet.com/cobra-bracelet-kit/ 🪐
I can’t do it yet, but I will some day
We'll be rooting for you!
What the duck it is so hard
Simplest video yet.Thanks alot
Sorry dude but you are talking way too quickly for my son to follow.:
Slow the speed down, at the top of screen you will see the last button that looks like a gear, tap on that and slow video to 75% or slower! I do this a lot cuz I’m hard of hearing! Hope this helps you.
Very nice. I love it. Thank you.
Is that 3 in buckle?
I prefer to strip the inner cord out first. Creates a lower profile when adding a dog tag to it.
Im.going to try this with bailing twine to see how.it.looks
That sounds like fun! Let us know how it works out if possible.
amazing! thx.👍👍👍
The very first loop is called a larks head knot ....
Thanks for the comment! It is known by both names, so either way is ok. 👍
❤🎉😊 رائع ماشاء الله
so good
what name of product,that can make the bracelate
Hi! We used this 550 Paracord: www.paracordplanet.com/paracord/550-nylon-paracord/.
❤
Nice 👍
I've just started making things. As an outdoorsman I've plenty of cordage and tie many knots. This however, is different!
I use Goldberg seven strand 550 for a lot of uses. Not the cheapest but excellent quality. I've made one of these for practical as well as style. I've incorporated a BCB compass, ceramic blade and a nylon cuff key in the clasp.
Great and informative video, easy to understand also.
We're happy to help. Thanks for watching and leaving positive feedback!
Amazing video only one thing its a bit quick and i keep having to go back to the place i need
Thank you for the feedback! We'll keep that in mind for future videos.
Nice video. It was useful for a quick reminder on how to make this particular bracelet.
Thank you. I just made my first paracord bracelet ever. I made it for my son. Is a little big, but he likes it. Great tutorial video.
Thanks for watching! 👍
🎉
Reeeeeee
My son unraveled his favorite bracelet and this was the best help in re-tying it for him. Thank you so much!
Glad we could help!
I CAN'T
Excellent tutorial, very satisfying evening project... thanks!
i don’t care what size ur wrist it
fake didnt work on the first knot!!!!!!
you did it wrong then because everyone else including me now have a braclet.