No entiendo mucho el inglés, pero el video es muy bueno y muy bien explicado. He pagado por un curso y, sinceramente es mucho más pobre que este video gratuito
Hi, I am watching your videos. They are very useful. I have one question here. How do we set the target value for the staircase? the green square did not come through uniformity between 0.8 and 900 lux. Target values are not set for this staircase area could you please help in this regard?
Hi Nelca! I have a question.... In the video the stairs start in the first floor from the left and end in the second floor in the right. How can I invert that? I mean I want to start in the first floor in the right and end in the left. How can I do that ??
I can see that the height of stairs you used is standard (3m), and I did the same at the beginning and I got a 102 average lux. However, I found out that the project consultant am working with that he wants the distance between the surface of light fitting and the surface below it to be 2.64. So I pressed on the stair and changed the third blank from 3 to 2.64. I saw that the stairs shrinked ( which means the distance between light and ground below it is lower) ;however, the result I got after that for average lux is 62 which is lower. So did I do something wrong because lux should increase ? Thanks for the advice.
Hi Nelca, usually i draw floor by floor and room by room for each floor .. and i draw the room of staircase in everyfloor.. in this way then i can't create a unique room but separated rooms.. So do you suggest always to create a stand alone building with 1 higher floor for the staircase even it is inside another building ? thank you
you probably dont care but does someone know of a trick to log back into an Instagram account..? I was stupid forgot the password. I would love any tricks you can offer me!
@Roman Mateo I really appreciate your reply. I got to the site on google and I'm trying it out now. Takes a while so I will reply here later when my account password hopefully is recovered.
I am not able to check UGR values for a room with regular lighting arrangement in Dialux Evo 9.0. In the output , where can I see the TAsk, Surrounding and Background illuminance results
Hello! It's possible to change the results on the platform, from perpendicular illuminance (adaptative) to horizontal illuminance? It's also possible to remove luminance of the report? Thank you!
Hi, I am attempting to model a stairwell where the footprint of the room, which spans 3 storeys, (and therefore rise and runs of staircases vary) is not the same on each floor of the building. Could you possibly elaborate on how to model this type of stairwell? I would have no problem sharing floor plans with dimensions with you.
Dear Nelca, I can't do the surface calculation for landing. When i take the calculation point with {result on surface}, the false colors and grid line are not appear for these landing objects. Please help me how should i do to appear the calculation point on surface. :'(
Sorry Mrs. Roco, but I think you chose the false calculation mode for the stairs. The right one is the first one. The term "perpendicular" corresponds not with the original calculation parameter which is defined in german. It´s not correct translated from german in english. The right calculation mode which is defined in the international norm 12464 defines the vertical direction to the measurement layer. When the layer is turned it has to be the first calculation parameter. But nevertheless thank you for this video with best wishes
Please i am having error whenever i want to do lighting calculation. Here is the error. .....An error occur while calculating. How can i solve this problem
Excellent presentation 🙏🙌👍
Thank you so much for all your help in All the ways u are the best
No entiendo mucho el inglés, pero el video es muy bueno y muy bien explicado. He pagado por un curso y, sinceramente es mucho más pobre que este video gratuito
Hi, I am watching your videos. They are very useful. I have one question here. How do we set the target value for the staircase? the green square did not come through uniformity between 0.8 and 900 lux. Target values are not set for this staircase area could you please help in this regard?
Hi Nelca, how much light (lx) you suggest for o bedroom ? Thx.
Hi Nelca! I have a question.... In the video the stairs start in the first floor from the left and end in the second floor in the right. How can I invert that? I mean I want to start in the first floor in the right and end in the left. How can I do that ??
I would like to suggest to do the other stairs manually because you cannot mirror or edit the stairs object from dialux.
Thank you 😊 God bless you 🙏
which are the standards that you are using for lux level reference ? Can you suggest some IEC lighting standards for reference ?
Thy it was realy helpfoul!
I can see that the height of stairs you used is standard (3m), and I did the same at the beginning and I got a 102 average lux. However, I found out that the project consultant am working with that he wants the distance between the surface of light fitting and the surface below it to be 2.64. So I pressed on the stair and changed the third blank from 3 to 2.64. I saw that the stairs shrinked ( which means the distance between light and ground below it is lower) ;however, the result I got after that for average lux is 62 which is lower. So did I do something wrong because lux should increase ?
Thanks for the advice.
yes, the lux value should increase. check the location of ur luminaire in elevation view. It might not mounted properly.
hi can I just use model from 3d sketch up and import to dialux evo.Like for example complicated designs.
yes, u can Arki. All you need to do is to convert the file into .3ds file so you can import it. watch my other videos about it.
Thank you for sharing.
Hi Nelca, usually i draw floor by floor and room by room for each floor .. and i draw the room of staircase in everyfloor.. in this way then i can't create a unique room but separated rooms.. So do you suggest always to create a stand alone building with 1 higher floor for the staircase even it is inside another building ? thank you
you probably dont care but does someone know of a trick to log back into an Instagram account..?
I was stupid forgot the password. I would love any tricks you can offer me!
@Roman Mateo I really appreciate your reply. I got to the site on google and I'm trying it out now.
Takes a while so I will reply here later when my account password hopefully is recovered.
@Roman Mateo it worked and I now got access to my account again. Im so happy!
Thanks so much, you saved my ass!
@Dario Amir no problem xD
what does the letter E mean in dialux?
I am not able to check UGR values for a room with regular lighting arrangement in Dialux Evo 9.0. In the output , where can I see the TAsk, Surrounding and Background illuminance results
Hello!
It's possible to change the results on the platform, from perpendicular illuminance (adaptative) to horizontal illuminance?
It's also possible to remove luminance of the report?
Thank you!
yes its possible. you will find it in the calculation tab options.
I can't find... I find for the calculation surface, but for the platform I can't find...
Can you show me please?
Thank u
Hi, I am attempting to model a stairwell where the footprint of the room, which spans 3 storeys, (and therefore rise and runs of staircases vary) is not the same on each floor of the building. Could you possibly elaborate on how to model this type of stairwell? I would have no problem sharing floor plans with dimensions with you.
Hi Jo, if the stairs are not typical, try modelling it manually. create your own stairs by using extrusion volume or cube.
Where can I get that software .
nice good
hi can u please explain me how to make "double shaped stairs " ......
either use the extrusion volume and do it manually or get it from 3Dwarehouse or any free 3d files websites.
Hi in my dailux evo 7 i am unable to find stair in object and unable to right click .pls help to advise
Thanks
Thanks you...
I'm working on Emergency Lighting for staircases. What international standard for emergency lighting should I use?
you can go for IESNA or CIBSE. which standard do u usually use in your country?
How can i build in one stage 4 floors?
Dear Nelca, I can't do the surface calculation for landing. When i take the calculation point with {result on surface}, the false colors and grid line are not appear for these landing objects. Please help me how should i do to appear the calculation point on surface. :'(
edit your point distance. check this video. ua-cam.com/video/nJ3wd-SanEs/v-deo.html
Thanks alot Nelca
Thank you
Sorry Mrs. Roco,
but I think you chose the false calculation mode for the stairs.
The right one is the first one. The term "perpendicular" corresponds not with the original calculation parameter which is defined in german. It´s not correct translated from german in english.
The right calculation mode which is defined in the international norm 12464 defines the vertical direction to the measurement layer. When the layer is turned it has to be the first calculation parameter.
But nevertheless thank you for this video
with best wishes
thanks
very good
Kak
@@43กษิดิศไดโจ้ เหมือนหล่อ่ะ
Please i am having error whenever i want to do lighting calculation. Here is the error. .....An error occur while calculating. How can i solve this problem
how to mirror this staircase ?
not possible to mirror this stairs in Dialux. Do it in other software first like sketchup, pcon planner, or autocad.
thanks nelca
min 19. plano inclinado ok.
one two three
four five six!